[1] 于元昊, 董玉花, 邢 静, 等. Q235 碳钢表面 SiO2/PDMS超疏水涂层的制备及防腐性能研究[J]. 表面技术, 2023, 52(9): 209-219. Yu Yuanhao, Dong Yuhua, Xing Jing, et al. Preparation and anti-corrosion properties of SiO2/PDMS super-hydrophobic coating on Q235 carbon steel[J]. Surface Technology, 2023, 52(9): 209-219. [2] 王 浩, 席艳君, 马明星, 等. 感应熔覆技术的发展现状与展望[J]. 金属热处理, 2024, 49(2): 265-273. Wang Hao, Xi Yanjun, Ma Mingxing, et al. Current status and prospect of induction cladding technology[J]. Heat Treatment of Metals, 2024, 49(2): 265-273. [3] Yang H, Zhang P, Nie G, et al. The synergistic inhibitions of tungstate and molybdate anions on pitting corrosion initiation for Q235 carbon steel in chloride solution[J]. Materials, 2022, 15(24): 8986. [4] 李凯玥, 黄 江, 师文庆, 等. WC对316L钢表面的铁基激光熔覆涂层的性能影响研究[J]. 应用激光, 2023, 43(6): 36-41. Li Kaiyue, Huang Jiang, Shi Wenqing, et al. Effect of WC on the properties of Fe-based laser cladding coating on 316L substrate[J]. Applied Laser, 2023, 43(6): 36-41. [5] 吴敬权, 李德荣, 安芬菊, 等. WC对316L钢表面的镍基激光熔覆涂层的性能影响研究[J]. 激光技术, 2024, 48(5): 677-683. Wu Jingquan, Li Derong, An Fenju, et al. Effect of WC on the properties of Ni-based laser cladding coating on 316L substrate[J]. Laser Technology, 2024, 48(5): 677-683. [6] 赵稳利, 张 亮, 李晓君, 等. 激光功率对316L不锈钢熔覆层组织及性能的影响[J]. 河北科技大学学报, 2024, 45(1): 74-81. Zhao Wenli, Zhang Liang, Li Xiaojun, et al. Effect of laser power on the microstructure and properties of 316L stainless steel cladding layer[J]. Journal of Hebei University of Science and Technology, 2024, 45(1): 74-81. [7] 皮自强, 杜开平, 陈 星, 等. TiC含量对激光熔覆TiC增强双相不锈钢复合涂层性能的影响[J]. 热喷涂技术, 2023, 15(3): 29-36. Pi Ziqiang, Du Kaiping, Chen Xing, et al. Effect of TiC content on properties of laser cladding TiC reinforced duplex stainless steel composite coating[J]. Thermal Spray Technology, 2023, 15(3): 29-36. [8] 刘 博, 马志伟, 张唐海, 等. 激光熔覆制备的TiN-VC增强Co基合金涂层的微观结构和耐磨性研究[J]. 热处理, 2022, 37(6): 19-22. Liu Bo, Ma Zhiwei, Zhang Tanghai, et al. Microstructure and wear resistance of TiN-VC reinforced cobalt-base alloy coatings fabricated by laser cladding[J]. Heat Treatment, 2022, 37(6): 19-22. [9] 钟文华, 刘贵仲, 葛大梁, 等. Cr3C2对镍基碳化钨激光熔覆涂层组织与性能的影响[J]. 金属热处理, 2012, 37(7): 45-48. Zhong Wenhua, Liu Guizhong, Ge Daliang, et al. Effect of adding Cr3C2 on microstructure and properties of Ni/WC cladding layer[J]. Heat Treatment of Metals, 2012, 37(7): 45-48. [10] Weng F, Yu H, Liu J, et al. Microstructure and wear property of the Ti5Si3/TiC reinforced Co-based coatings fabricated by laser cladding on Ti-6Al-4V[J]. Optics & Laser Technology, 2017, 92: 156-162. [11] 贾 升, 张 帆, 边 兰, 等. Y2O3对316L不锈钢激光熔覆涂层耐磨性和耐蚀性的影响[J]. 热加工工艺, 2023, 52(8): 125-129. Jia Sheng, Zhang Fan, Bian Lan, et al. Effect of Y2O3 on wear resistance and corrosion resistance of laser-cladding layer of 316L stainless steel[J]. Hot Working Technology, 2023, 52(8): 125-129. [12] 段晓溪, 高士友, 顾勇飞, 等. 激光熔覆316L+SiC 的强化机制和摩擦磨损性能研究[J]. 中国激光, 2016, 43(1): 62-70. Duan Xiaoxi, Gao Shiyou, Gu Yongfei, et al. Study on reinforcement mechanism and frictional wear properties of 316L-SiC mixed layer deposited by laser cladding[J]. Chinese Journal of Lasers, 2016, 43(1): 62-70. [13] 吴志方, 朱震宇. 块体双尺度结构金属材料的研究进展[J]. 粉末冶金工业, 2021, 31(6): 81-86. Wu Zhifang, Zhu Zhenyu. Research progress in bulk metallic materials of dual-scale structure[J]. Powder Metallurgy Industry, 2021, 31(6): 81-86. [14] 刘 超. 机械合金化制备的Cu-Sn互不溶体系合金的组织结构与性能研究[D]. 武汉: 武汉科技大学, 2017. Liu Chao. Study on the organization and properties of Cu-Sn mutually insoluble system alloys prepared by mechanical alloying[D]. Wuhan: Wuhan University of Science and Technology, 2017. [15] Lu Z C, Gao Y, Zeng M Q, et al. Improving wear performance of dual-scale Al-Sn alloys: The role of Mg addition in enhancing Sn distribution and tribolayer stability[J]. Wear, 2014, 309(1/2): 216-225. [16] 孙 琳, 位超群, 隋欣梦, 等. SiC颗粒尺寸对TiNi基熔覆层组织与性能的影响[J]. 中国激光, 2018, 45(5): 48-54. Sun Lin, Wei Chaoqun, Sui Xinmeng, et al. Effects of SiC particle size on microstructures and properties of TiNi based cladding layers[J]. Chinese Journal of Lasers, 2018, 45(5): 48-54. [17] 贺天柱, 吴 喆, 张成武, 等. 扫描速度对车用316L不锈钢熔覆层组织及力学性能的影响[J]. 矿冶工程, 2023, 43(5): 159-163, 168. He Tianzhu, Wu Zhe, Zhang Chengwu, et al. Effect of scanning speed on the microstructure and mechanical properties of automotive 316L stainless steel cladding layer[J]. Mining and Metallurgical Engineering, 2023, 43(5): 159-163, 168. [18] Yan X C, Hu J, Wang L Y, et al. The coupled effect of thermal and mechanical stabilities of austenite on the wear resistance in a 0.2C-5Mn-1.6Si steel down to cryogenic temperatures[J]. Wear, 2021, 486-487. [19] 王廷宣, 章 健, 刘 敬, 等. 激光熔覆层裂纹控制的研究进展[J]. 机械工程材料, 2023, 47(8): 1-7, 58. Wang Tingxuan, Zhang Jian, Liu Jing, et al. Research progress on crack control of laser cladding[J]. Mechanical Engineering Materials, 2023, 47(8): 1-7, 58. [20] 龙伟民, 刘大双, 吴爱萍, 等. 金刚石粒度及添加量对大气环境感应钎涂层耐磨性的影响[J]. 机械工程学报, 2023, 59(12): 225-235. Long Weimin, Liu Dashuang, Wu Aiping, et al. Influence of size and content on the wear resistance of induction brazing diamond coating in air[J]. Journal of Mechanical Engineering, 2023, 59(12): 225-235. [21] 周 勇, 徐 龙, 周 爽, 等. 激光熔覆316L涂层晶粒生长取向与形貌对其耐蚀性能的影响[J]. 表面技术, 2023, 52(5): 378-387. Zhou Yong, Xu Long, Zhou Shuang, et al. Effect of grain growth orientation and morphology of laser-cladded 316L coating on its corrosion resistance[J]. Surface Technology, 2023, 52(5): 378-387. [22] 周显新, 辛 博, 巩亚东, 等. 扫描方向对变厚度熔覆成形件组织与力学性能的影响[J]. 中国激光, 2019, 46(8): 97-103. Zhou Xianxin, Xin Bo, Gong Yadong, et al. Effect of scanning direction on microstructure and mechanical properties of part formed via variable thickness layer cladding deposition[J]. Chinese Journal of Lasers, 2019, 46(8): 97-103. [23] 杨 兵, 刘春忠, 高恩志, 等. 铸态退火2024合金在不同温度下的变形行为[J]. 材料研究学报, 2022, 36(10): 730-738. Yang Bing, Liu Chunzhong, Gao Enzhi, et al. Deformation behaviour of cast and annealed 2024 Al-alloy at different temperatures[J]. Chinese Journal of Materials Research, 2022, 36(10): 730-738. [24] 李垭焓, 谭诚香, 李梦瑶, 等. 激光熔覆铁基合金涂层的研究进展[J]. 表面技术, 2024, 53(6): 11-27, 66. Li Yahan, Tan Chengxiang, Li Mengyao, et al. Research progress of laser-cladding Fe-based alloy coating[J]. Surface Technology, 2024, 53(6): 11-27, 66. [25] 耿宏伟. 超细晶Al及Al-Mg合金的Hall-Petch关系与锯齿流变效应研究[D]. 沈阳: 东北大学, 2019. Geng Hongwei. Investigation of Hall-Petch coefficient and portevin-Le chatelier effect in ultrafine-grained Al and Al-Mg alloys[D]. Shenyang: Northeastern University, 2019. [26] 单忠德, 姜 超, 庄百亮, 等. B1500HS钢低冷速形变下的力学性能与Hall-Petch关系[J]. 材料热处理学报, 2014, 35(4): 137-142. Shan Zhongde, Jiang Chao, Zhuang Bailiang, et al. Mechanical properties and Hall-Petch relationship of B1500HS steel deforming under lower cooling rate[J]. Transactions of Materials and Heat Treatment, 2014, 35(4): 137-142. [27] Han M, Zhang J, Dong P, et al. Tribological properties and wear mechanism of Ni@Gr reinforced Ni-based alloy coatings prepared via laser cladding[J]. Journal of Materials Research and Technology, 2024, 31: 799-809. [28] 赵 群, 赵晋芳, 朱 爽, 等. 激光原位合成NbC对风电机组用316L不锈钢熔覆涂层组织及耐磨性的影响[J]. 粉末冶金工业, 2023, 33(4): 75-80. Zhao Qun, Zhao Jinfang, Zhu Shuang, et al. Effect of laser in situ synthesis NbC on microstructure and wear resistance of 316L stainless steel cladding for wind turbine[J]. Powder Metallurgy Industry, 2023, 33(4): 75-80. [29] 黄永攀, 李道火, 王 锐, 等. 改善铸造法制造MMCp中铝基体与增强颗粒间润湿性的方法[J]. 铸造技术, 2004, 25(1): 17-18. Huang Yongpan, Li Daohuo, Wang Rui, et al. A improvement way of the wet ability between particles and aluminum matrix among MMCp produced by casting[J]. Foundry Technology, 2004, 25(1): 17-18. [30] 刘金刚, 杨建花, 王高升, 等. TC4钛合金表面激光熔覆WC增强镍基复合涂层的组织及耐磨性[J]. 稀有金属材料与工程, 2022, 51(8): 2907-2914. Liu Jingang, Yang Jianhua, Wang Gaosheng, et al. Microstructure and wear resistance of laser cladding WC reinforced Ni based composite coating on TC4 titanium alloy[J]. Rare Metal Materials and Engineering, 2022, 51(8): 2907-2914. |