铝锂合金析出强化行为的影响因素及其研究进展

doi:10.13251/j.issn.0254-6051.2024.03.050

金属热处理 ›› 2024, Vol. 49 ›› Issue (3): 313-319.DOI: 10.13251/j.issn.0254-6051.2024.03.050

• 综述 • 上一篇

铝锂合金析出强化行为的影响因素及其研究进展

张力文¹, 刘强¹, 雷超², 沈雪红³

1.西安航空职业技术学院, 陕西西安 710089;
2.西安理工大学材料科学与工程学院, 陕西西安 710048;
3.中航西安飞机工业集团股份有限公司, 陕西西安 710089

收稿日期:2023-10-10 修回日期:2024-02-05 出版日期:2024-03-25 发布日期:2024-04-24
作者简介:张力文(1989—),男,讲师,博士,主要研究方向为铝合金高温蠕变时效分析,E-mail:375350782@qq.com
基金资助:
陕西省教育厅2023年度科研计划项目一般专项(23JK0501);西安航空职业技术学院2023年度校级重点项目(23XHZK-05)

Factors influencing precipitation strengthening behavior of aluminum-lithium alloys and their research progress

Zhang Liwen¹, Liu Qiang¹, Lei Chao², Shen Xuehong³

1. Xi'an Aeronautical Polytechnic Institute,Xi'an Shaanxi 710089, China;
2. School of Materials Science and Engineering, Xi'an University of Technology, Xi'an Shaanxi 710048, China;
3. AVIC Xi'an Aircraft Industry Group Company Ltd., Xi'an Shaanxi 710089, China

Received:2023-10-10 Revised:2024-02-05 Online:2024-03-25 Published:2024-04-24

摘要/Abstract

摘要： 可热处理铝锂合金可通过时效强化使合金获得较高的力学性能,而合金的时效强化行为受多种因素的影响。本文从温度、预变形、形变热处理、外加应力以及外加电场角度对合金析出动力学及强化行为的影响进行了总结,通过对影响因素的综述分析,以期为高强铝锂合金的设计及制备提供理论依据。

关键词: 析出, 铝合金, 热处理, 时效

Abstract: Heat-treatable aluminum alloys can obtain higher mechanical properties through aging strengthening, but the aging strengthening behavior of the alloys is affected by many factors. The effects of temperature, pre-deformation, thermomechanical treatment, applied stress and applied electric field on alloy precipitation kinetics and strengthening behavior are summarized. Through reviewing and analyzing the influencing factors, it is hoped to provide the theoretical basis for the design and preparation of high-strength aluminum-lithium alloys.

Key words: precipitation, aluminum alloy, heat treatment, aging

中图分类号:

TB404

张力文, 刘强, 雷超, 沈雪红. 铝锂合金析出强化行为的影响因素及其研究进展[J]. 金属热处理, 2024, 49(3): 313-319.

Zhang Liwen, Liu Qiang, Lei Chao, Shen Xuehong. Factors influencing precipitation strengthening behavior of aluminum-lithium alloys and their research progress[J]. Heat Treatment of Metals, 2024, 49(3): 313-319.

参考文献

[1]吴秀亮, 刘铭, 李国爱, 等. 铝锂合金热机械处理研究进展[J]. 航空材料学报, 2016, 36(5): 82-89.
Wu Xiuliang, Liu Ming, Li Guoai, et al. Research and progress of thermomechanical treatment of Al-Li alloys[J]. Journal of Aeronautical Materials, 2016, 36(5): 82-89.
[2]朱宏伟, 陈永来, 马鹏程, 等. 2195铝锂合金的形变热处理工艺优化[J]. 金属热处理, 2019, 44(12) 143-147.
Zhu Hongwei, Chen Yonglai, Ma Pengcheng, et al. Optimization of thermo-mechanical treatment process of 2195 Al-Li alloy[J]. Heat Treatment of Metals. 2019, 44(12) 143-147.
[3]邓名洋, 李瑞金, 王硕, 等. 铝锂合金热处理工艺及其对材料性能影响研究现状[J]. 有色金属加工, 2023, 52(4): 17-25.
Deng Mingyang, Li Ruijing, Wang Shuo, et al. Study on heat treatment process and its effect on material properties of Al-Li alloys[J]. Nonferrous Metals Processing, 2023, 52(4): 17-25.
[4]Blankenship C P, Starke E A. Structure-property relationships in Al-Li-Cu-Mg-Ag-Zr alloy X2095[J]. Acta Metallurgica et Materialia, 1994, 42(3): 845-855.
[5]Zhou C, Zhan L H, Shen R L, et al. Creep behavior and mechanical properties of Al-Li-S4 alloy at different aging temperatures[J]. Journal of Central South University, 2020, 27(4): 1168-1175.
[6]Deng Y J, Huang G J, Cao L F, et. al. Effect of ageing temperature on precipitation of Al-Cu-Li-Mn-Zr alloy[J]. Journal of Central South University, 2018, 25(6): 1340-1349.
[7]Wang S G, Huang Y, Zhao L. Effects of different aging treatments on microstructures and mechanical properties of Al-Cu-Li alloy joints welded by electron beam welding[J]. Chinese Journal of Aeronautics, 2018, 31(2): 363-369.
[8]Chen Z W, Zhao K, Fan L. Combinative hardening effects of precipitation in a commercial aged Al-Cu-Li-X alloy[J]. Materials Science and Engineering A, 2013, 588: 59-64.
[9]Zou Y L, Chen X, Chen B. Corrosion behavior of 2198 Al-Cu-Li alloy in different aging stages in 3.5wt%NaCl aqueous solution[J]. Journal of Material Research, 2018, 33(8): 1011-1022.
[10]Cassada W A, Shiflet G J, Starke E A, The effect of plastic-deformation on Al₂CuLi (T₁) precipitation[J]. Metallurgical Transactions A: Physical Metallurgy and Materials Science, 1991, 22(2): 299-306.
[11]Li J F, Zheng Z Q, Ren W D, et al. Simulation on function mechanism of T₁(Al₂CuLi) precipitate in localized corrosion of Al-Cu-Li alloys[J]. Transactions of Nonferrous Metals Society of China, 2006, 16(6) : 1268-1273.
[12]Lu Y L, Wang J, Li X C, et al. Effect of pre-deformation on the microstructures and properties of 2219 aluminum alloy during aging treatment[J]. Journal of Alloys and Compounds, 2017, 699: 1140-1145.
[13]Chen A T, Wu G H, Zhang L, et al. Microstructural characteristics and mechanical properties of cast Al-3Li-xCu-0.2Zr alloy[J]. Materials Science and Engineering A, 2016, 677: 29-40.
[14]Li H, Zhan L H, Huang M H, et al. Effects of pre-strain and stress level on stress relaxation ageing behaviour of 2195 Al-Li alloy: Experimental and constitutive modelling[J]. Journal of Alloys and Compounds, 2021, 851: 156829.
[15]Chen X Y, Zhao G Q, Xu X, et al. Effects of heat treatment on the microstructure, texture and mechanical property anisotropy of extruded 2196 Al-Cu-Li alloy[J]. Journal of Alloys and Compounds, 2021, 862: 158102.
[16]Hu L B, Zhan L H, Liu Z L, et al. The effects of pre-deformation on the creep aging behavior and mechanical properties of Al-Li-S4 alloys[J]. Materials Science and Engineering A, 2017, 703: 496-502.
[17]于娟, 冯朝辉, 赵唯一, 等. 预拉伸变形量对2050铝锂合金组织和性能的影响[J]. 金属热处理, 2022, 47(06): 64-68.
Yu Juan, Feng Chaohui, Zhao Weiyi, et al. Effect of pre-stretching amount on mircostructure and properties of 2050 Al-Li alloy[J]. Heat Treatment of Metals, 2022, 47(06): 64-68.
[18]Deng Y L, Huang G J, Cao L F, et al. Effect of pre-deformation on the precipitation behavior and mechanical property of Al-Cu-Li-Mn-Zr alloy[J]. Materials Review, 2018, 32(2B): 569-573.
[19]Dong Y, Ye L Y, Liu X D, et al, Effects of large strain pre-deformation on creep age behavior and microstructural evolution of an Al-Cu-Li alloy[J]. Materials Letters, 2022, 324: 132699.
[20]Gao Z G, Zhang X M, Che M A, et al. Investigation on theta' precipitate thickening in 2519A-T87 aluminum alloy plate impacted[J]. Journal of Alloys and Compounds, 2009, 476(1/2): L1-L3.
[21]Li S Y, Wang Q, Chen J H, et al. The effect of thermo-mechanical treatment on the formation of T₁ phase and δ'/θ'/δ' composite precipitate in an Al-Cu-Li-Mg alloy[J]. Materials Characterization, 2021, 176: 111123.
[22]Lin Y C, Jiang Y Q, Zhang J L, et al. Influence of stress-aging processing on precipitates and mechanical properties of a 7075 aluminum alloy[J]. Advanced Engineering Materials, 2018, 20(1): 1700583.
[23]Zhang J, Li Z D, Xu F S, et al. Regulating effect of pre-stretching degree on the creep aging process of Al-Cu-Li alloy[J]. Materials Science and Engineering A , 2019, 763: 138157.
[24]Ma P P, Zhan L H, Liu C H, et al. Strong stress-level dependence of creep-ageing behavior in Al-Cu-Li alloy[J]. Materials Science and Engineering A, 2021, 802: 140381.
[25]Zhang L W, Li H, Bian T J, et al. Plastic loading induced high strength-ductility for creep aged Al-Cu-Li alloys[J]. Materials Science and Engineering A, 2023, 865: 144615.
[26]Jiang D D, Yang R B, Wang D F, et al. Effect of external stress on the microstructure and mechanical properties of creep-aged Al-Cu-Li-Ag alloy[J]. Micron, 2021, 143: 103011.
[27]Li H, Zhan L H, Huang M H, et al. Investigating the stress level impact on the creep rupture behaviour of 2195-T84 Al-Li alloy: Experimental and constitutive modelling[J]. International Journal of Damage Mechanics, 2020, 30(5): 700-719.
[28]Chen X Y, Zhan L H, Ma Z Y, et al. Study on tensile/compressive asymmetry in creep ageing behavior of Al-Cu alloy under different stress levels[J]. Journal of Alloys and Compounds, 2020, 843: 156157.
[29]Liu W, Cui J Z. Effect of the homogenization treatment in an electric-field on T₁ precipitation in 2091-Al-Li-alloy[J]. Scripta Metallurgica Et Materialia, 1995, 33(4): 623-626.
[30]Liu Y Z, Huang M H, Ma Z Y, et al. Influence of the low-density pulse current on the ageing behavior of AA2219 aluminum alloy[J]. Journal of Alloys and Compounds, 2016, 673: 358-363.
[31]Wu W C, Wang Y J, Wang J B, et al. Effect of electrical pulse on the precipitates and material strength of 2024 aluminum alloy[J]. Materials Science and Engineering A, 2014, 608: 190-198.
[32]Xiao H, Zhang K F, Shi C C, et al. Influence of electropulsing treatment combined with pre-deformation on ageing behavior and mechanical properties of 5A90 Al-Li alloy[J]. Journal of Alloys and Compounds, 2019, 784: 1234-1247.
[33]Shou W B, Yi D Q, Yi R W, et al. Influence of electric field on microstructure and mechanical properties of an Al-Cu-Li alloy during ageing[J]. Materials and Design, 2016, 98: 79-87.

铝锂合金析出强化行为的影响因素及其研究进展

Factors influencing precipitation strengthening behavior of aluminum-lithium alloys and their research progress

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	徐开泰, 刘骐升, 尤凯司, 刘照宇, 张峻嘉. 低温冷轧与时效处理对Cu-Ni-Co-Si合金组织性能的影响[J]. 金属热处理, 2024, 49(3): 1-6.
[2]	谢谱, 赵吉庆, 颜廷亭. 回火工艺对HT9钢组织和力学性能的影响[J]. 金属热处理, 2024, 49(3): 44-49.
[3]	殷锦华, 祝柏林, 胡木林, 彭会. 热处理对高Co、高V粉末高速钢PM60碳化物析出的影响[J]. 金属热处理, 2024, 49(3): 68-76.
[4]	王亚勇, 曹喜娟, 任广笑, 刘永哲, 郑云凯. 热处理对差压铸造ZL201A铝合金壳体内部组织及性能的影响[J]. 金属热处理, 2024, 49(3): 108-111.
[5]	刘鹏飞, 关琳, 刘建, 陈宇, 刘宏亮. 退火工艺对低成本980 MPa级冷轧双相钢组织和性能的影响[J]. 金属热处理, 2024, 49(3): 122-127.
[6]	吴红庆, 毛宏, 邓志鹏, 宁辉, 吴晓春. SLD-MAGIC冷作模具钢的热处理微畸变特性及其机理[J]. 金属热处理, 2024, 49(3): 128-134.
[7]	汪英芝, 郑留伟, 杨飞, 聂豫晋, 孟立鑫, 尹磊, 梁伟. 选区激光熔化Inconel 718合金的沉淀析出行为及力学性能[J]. 金属热处理, 2024, 49(3): 141-146.
[8]	于林然, 杨卓越, 苏杰, 丁雅莉, 刘赓. 一种新型2 GPa级低合金超高强度钢及热处理工艺[J]. 金属热处理, 2024, 49(3): 164-167.
[9]	郭续龙, 周扬, 陈琦. Inconel718高温合金Laves相及碳化物析出机理[J]. 金属热处理, 2024, 49(3): 190-197.
[10]	刘敏, 郑志鹏, 甘利红, 刘胤辰, 刘震, 张阳, 冯波, 刘春泉. 桁架用Nb-Mo微合金中锰钢强化机理及碳化物析出行为[J]. 金属热处理, 2024, 49(3): 198-203.
[11]	陆凤君. V-N微合金化非调质钢的组织和力学性能[J]. 金属热处理, 2024, 49(3): 204-208.
[12]	赵忠超, 唐和壮, 曹善鹏, 孙有政. 晶粒组织对Al-Cu合金应力腐蚀开裂行为及导电率的影响[J]. 金属热处理, 2024, 49(3): 244-250.
[13]	裴明德, 李国平, 秦宇航, 张峰, 范新智, 郭宏钢. V含量对不锈钢TDVS2001组织性能的影响[J]. 金属热处理, 2024, 49(3): 251-255.
[14]	刘禹, 孙迎建. 合金元素Si、V、Ti对40Cr13马氏体不锈钢组织与性能的影响[J]. 金属热处理, 2024, 49(3): 256-261.
[15]	董佳欣, 罗云, 蒋文春, 谷文斌, 董丕健. 大型厚壁筒体电磁感应加热均温性控制与参数优化[J]. 金属热处理, 2024, 49(3): 275-278.