回火温度对深井石油套管用钢组织性能的影响

doi:10.13251/j.issn.0254-6051.2024.03.019

金属热处理 ›› 2024, Vol. 49 ›› Issue (3): 112-115.DOI: 10.13251/j.issn.0254-6051.2024.03.019

回火温度对深井石油套管用钢组织性能的影响

王娇娇, 赵林林, 高云哲, 石帅, 武晓龙, 赵燕青, 周玉青, 弓俊杰

河北大河材料科技有限公司, 河北石家庄 050023

收稿日期:2023-09-03 修回日期:2023-12-30 出版日期:2024-03-25 发布日期:2024-04-24
通讯作者: 赵林林,研究员,硕士,E-mail:zhaolinlin@hbisco.com
作者简介:王娇娇(1993—),女,助理研究员,硕士,主要研究方向为特殊钢,E-mail:wangjiaojiao@hbisco.com。
基金资助:
河北省自然科学基金高端钢铁冶金联合基金(E2022318003)

Effect of tempering temperature on microstructure and properties of an oil casing steel used for deep wells

Wang Jiaojiao, Zhao Linlin, Gao Yunzhe, Shi Shuai, Wu Xiaolong, Zhao Yanqing, Zhou Yuqing, Gong Junjie

HBIS Materials Technology Research Institute, Shijiazhuang Hebei 050023, China

Received:2023-09-03 Revised:2023-12-30 Online:2024-03-25 Published:2024-04-24

摘要/Abstract

摘要： 借助光学显微镜(OM)、扫描电镜(SEM)、拉伸试验机等设备研究了920 ℃淬火后回火温度对某深井石油套管钢微观组织和力学性能的影响。结果表明,试验钢在500~600 ℃回火得到回火索氏体,具有较高的强塑性与韧性,强塑积的波动范围为20.5~22.1 GPa·%,冲击吸收能量波动范围为94.6~100.3 J;当回火温度为550 ℃时,深井油套管试验钢具有最佳的综合力学性能,此时抗拉强度为978 MPa,屈服强度为935 MPa,强塑积为22.1 GPa·%,冲击吸收能量为100.3 J。

关键词: 石油套管钢, 回火温度, 微观组织, 力学性能

Abstract: Effect of tempering temperature on the microstructure and mechanical properties of a deep well oil casing steel quenched at 920 ℃ was studied by means of optical microscope (OM), scanning electron microscope (SEM) and tensile testing machine. The results show that the experimental steel obtains tempered martensite structure after tempered at 500-600 ℃, which has high product of strength and elongation and high toughness, where the product of strength and elongation is ranged from 20.5 to 22.1 GPa·%, and the impact absorbed energy is ranged from 94.6 to 100.3 J. When the tempering temperature is 550 ℃, the deep well oil casing experimental steel has the best comprehensive mechanical properties, with tensile strength of 978 MPa, yield strength of 935 MPa, and product of strength and elongation of 22.1 GPa·%, impact absorbed energy is 100.3 J.

Key words: oil casing steel, tempering temperature, microstructure, mechanical properties

中图分类号:

TG142.1

王娇娇, 赵林林, 高云哲, 石帅, 武晓龙, 赵燕青, 周玉青, 弓俊杰. 回火温度对深井石油套管用钢组织性能的影响[J]. 金属热处理, 2024, 49(3): 112-115.

Wang Jiaojiao, Zhao Linlin, Gao Yunzhe, Shi Shuai, Wu Xiaolong, Zhao Yanqing, Zhou Yuqing, Gong Junjie. Effect of tempering temperature on microstructure and properties of an oil casing steel used for deep wells[J]. Heat Treatment of Metals, 2024, 49(3): 112-115.

参考文献

[1]Knittel C R. Reducing petroleum consumption from transportation[J]. Journal of Economic Perspectives, 2012, 26(1): 93-118.
[2]卢小庆, 李勤, 李春香. 高强度稠油热采井专用套管TP110H的开发[J]. 钢管, 2007, 36(5): 14-17.
Lu Xiaoqing, Li Qin, Li Chunxiang. Development of TP110H high-strength special casing for service in thickened oil hot well[J]. Steel Pipe, 2007, 36(5): 14-17.
[3]李周波, 毕宗岳, 张峰, 等. Q125钢级SEW石油套管的研发[J]. 焊管, 2013, 36(8): 32-35.
Li Zhoubo, Bi Zongyue, Zhang Feng, et al. Research and development of Q125 grade SEW oil casing[J]. Welded Pipe and Tube, 2013, 36(8): 32-35.
[4]张毅隆. 耐腐蚀石油套管用钢的组织和性能研究[D]. 重庆: 重庆科技学院, 2018.
Zhang Yilong. Study on microstructure and properties of corrosion-resistant steel for oil casing[D]. Chongqing: Chongqing University of Science and Technology, 2018.
[5]彭先明. 100V-Cr-Mo石油套管材料组织与性能研究[D]. 兰州: 兰州理工大学, 2012.
Peng Xianming. The research on microstructure and mechanical properties of oil casing 100V-Cr-Mo[D]. Lanzhou: Lanzhou University of Technology, 2012.
[6]谷正官. 控制冷却工艺对V140石油套管组织性能的影响规律研究[D]. 沈阳: 东北大学, 2019.
Gu Zhengguan. The study on the influence law of tissue and performance of controlled cooling process for V140 oil casing[D]. Shenyang: Northeastern University, 2019.
[7]沈俞涛, 左鹏鹏, 吴晓春. Mo对4Cr5Mo2V型热作模具钢热稳定性能的影响[J]. 金属热处理, 2022, 47(12): 168-174.
Shen Yutao, Zuo Pengpeng, Wu Xiaochun. Effect of Mo on thermal stability of 4Cr5Mo2V hot-work die steel[J]. Heat Treatment of Metals, 2022, 47(12): 168-174.
[8]周健, 骈利平, 方峰, 等. Mo含量对9Cr18Mo钢组织及耐蚀性的影响[J]. 金属热处理, 2023, 48(12): 244-249.
Zhou Jian, Pian Liping, Fang Feng, et al. Effect of Mo content on microstructure and corrosion resistance of 9Cr18Mo steel[J]. Heat Treatment of Metals, 2023, 48(12): 244-249.
[9]刘斌. 控锻控冷贝氏体非调质钢的组织与性能研究[D]. 北京: 北京交通大学, 2022.
Liu Bin. Study on microstructure and properties of controlled-forging and controlled-cooling bainitic forging steels[D]. Beijing: Beijing Jiaotong University, 2022.
[10]雷鸣. 钒合金化中锰钢组织及力学性能研究[D]. 北京: 北京交通大学, 2019.
Lei Ming. Stydy of microstructure and mechanical properties of V-alloyedmedium Mn steel[D]. Beijing: Beijing Jiaotong University, 2019.
[11]Hui W J, Zhang Y J, Zhao X L, et al. Very high cycle fatigue properties of Cr-Mo low alloy steel containing V-rich MC type carbides[J]. Materials Science and Engineering A, 2016, 651: 311-320.
[12]邬冬生, 邓伟, 文辉, 等. 钒含量对时速350 km高铁制动盘用Cr-Mo-V钢奥氏体晶粒长大的影响[J]. 金属热处理, 2023, 48(9): 136-142.
Wu Dongsheng, Deng Wei, Wen Hui, et al. Effect of V content on austenite grain growth of Cr-Mo-V steel for brake disc of 350 km/h high speed railway[J]. Heat Treatment of Metals, 2023, 48(9): 136-142.
[13]Kihira H, Ito S, Mizoguchi S, et al. Creation of alloy design concept for anti air-born salinity weathering steel[J]. Zairyo-to-Kankyo, 2000, 49(1): 30-40.
[14]周成, 赵坦, 叶其斌, 等. 回火温度对1000 MPa级NiCrMoV低碳合金钢微观组织和低温韧性的影响[J]. 金属学报, 2022, 58(12): 1557-1569.
Zhou Cheng, Zhao Tan, Ye Qibin, et al. Effects of tempering temperature on microstructure and low-temperature toughness of 1000 MPa grade NiCrMoV low carbon alloyed steel[J]. Acta Metallurgica Sinica, 2022, 58(12): 1557-1569.
[15]杨颖, 徐宏亮, 王玉博, 等. 不同热处理工艺对大厚度桥梁钢组织和性能的影响[J]. 金属热处理, 2023, 48(10): 23-28.
Yang Ying, Xu Hongliang, Wang Yubo, et al. Effect of different heat treatment processes on microstructure and properties of large-thickeness bridge steels[J]. Heat Treatment of Metals, 2023, 48(10): 23-28.

回火温度对深井石油套管用钢组织性能的影响

Effect of tempering temperature on microstructure and properties of an oil casing steel used for deep wells

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	徐开泰, 刘骐升, 尤凯司, 刘照宇, 张峻嘉. 低温冷轧与时效处理对Cu-Ni-Co-Si合金组织性能的影响[J]. 金属热处理, 2024, 49(3): 1-6.
[2]	李晓亮, 程晓英, 王兆丰, 任毓文, 曾繁宇. 回火温度对Nb、V合金化低合金高强度钢氢脆敏感性的影响[J]. 金属热处理, 2024, 49(3): 7-14.
[3]	赵鑫磊, 袁晓飞, 乔珺威. 固溶温度对K424合金显微组织与力学性能的影响[J]. 金属热处理, 2024, 49(3): 15-21.
[4]	张禹, 于金瑞, 于鑫泓, 冯以盛, 张云山, 赵而团. 等温淬火温度对50CrVA钢组织与性能的影响[J]. 金属热处理, 2024, 49(3): 28-32.
[5]	张立生, 王小巩. 热轧变形对高铝316L不锈钢微观组织与性能的影响[J]. 金属热处理, 2024, 49(3): 33-36.
[6]	谢谱, 赵吉庆, 颜廷亭. 回火工艺对HT9钢组织和力学性能的影响[J]. 金属热处理, 2024, 49(3): 44-49.
[7]	王亚勇, 曹喜娟, 任广笑, 刘永哲, 郑云凯. 热处理对差压铸造ZL201A铝合金壳体内部组织及性能的影响[J]. 金属热处理, 2024, 49(3): 108-111.
[8]	张瑞, 唐恩, 袁清, 任杰, 莫家璇. 快速退火对冷轧超低碳钢组织和性能的影响[J]. 金属热处理, 2024, 49(3): 116-121.
[9]	刘鹏飞, 关琳, 刘建, 陈宇, 刘宏亮. 退火工艺对低成本980 MPa级冷轧双相钢组织和性能的影响[J]. 金属热处理, 2024, 49(3): 122-127.
[10]	汪英芝, 郑留伟, 杨飞, 聂豫晋, 孟立鑫, 尹磊, 梁伟. 选区激光熔化Inconel 718合金的沉淀析出行为及力学性能[J]. 金属热处理, 2024, 49(3): 141-146.
[11]	江畅, 陆恒昌, 韦习成, 董瀚. 发动机用SCM435钢的组织与疲劳性能[J]. 金属热处理, 2024, 49(3): 159-163.
[12]	张浩, 迟宏宵, 王成蹊, 马党参, 林鹏. V含量对高氮马氏体不锈钢组织及性能的影响[J]. 金属热处理, 2024, 49(3): 215-221.
[13]	唐贝, 王海丽, 付金龙, 胥珊娜. 微量Ce对热挤压态Mg-2Zn-0.4Ca-0.2Mn合金微观组织、力学性能及导热性的影响[J]. 金属热处理, 2024, 49(3): 222-229.
[14]	刘禹, 孙迎建. 合金元素Si、V、Ti对40Cr13马氏体不锈钢组织与性能的影响[J]. 金属热处理, 2024, 49(3): 256-261.
[15]	李荣斌, 宗在康, 张志玺, 张如林. 硅对铸态CoCrFeMnNi高熵合金组织及性能的影响[J]. 金属热处理, 2024, 49(2): 45-52.