铁基电热合金丝显微组织均匀性的对比分析

doi:10.13251/j.issn.0254-6051.2021.04.036

金属热处理 ›› 2021, Vol. 46 ›› Issue (4): 196-199.DOI: 10.13251/j.issn.0254-6051.2021.04.036

铁基电热合金丝显微组织均匀性的对比分析

张强¹, 祝志祥¹, 陈新¹, 张宁², 殷雪², 朱建新³, 孟利²

1.全球能源互联网研究院有限公司先进输电技术国家重点实验室, 北京 102209;
2.钢铁研究总院冶金工艺研究所, 北京 100081;
3.沈阳世杰电器有限公司, 辽宁沈阳 110042

收稿日期:2020-10-06 出版日期:2021-04-25 发布日期:2021-05-08
通讯作者: 孟利(1978—),男,高级工程师,博士,研究生导师,主要研究方向为金属材料各向异性及织构,E-mail:li_meng@126.com
作者简介:张强(1988—),男,高级工程师,硕士,主要研究方向为电工新材料开发及应用技术,E-mail:zhangqianghgd@126.com。
基金资助:
国家电网有限公司科技项目(52550018001J)

Contrastive analysis of microstructural heterogeneity of Fe-based electrothermal alloy wires

Zhang Qiang¹, Zhu Zhixiang¹, Chen Xin¹, Zhang Ning², Yin Xue², Zhu Jianxin³, Meng Li²

1. State Key Laboratory of Advanced Power Transmission Technology, Global Energy Interconnection Research Institute Co., Ltd., Beijing 102209, China;
2. Metallurgical Technology Institute, Central Iron and Steel Research Institute, Beijing 100081, China;
3. Shenyang Shijie Technology Co., Ltd., Shenyang Liaoning 110042, China

Received:2020-10-06 Online:2021-04-25 Published:2021-05-08

摘要/Abstract

摘要： 电热合金的性能与合金成分、显微组织及织构存在密切关系。对两种成分的商用铁基电热合金丝(0Cr25Al5合金和0Cr21Al6Nb合金)样品的显微组织进行评测,重点分析了合金丝中显微组织的均匀性,探讨了合金元素、织构类型及合金丝径向不同位置处晶粒尺寸分布特征的关联关系。结果显示,与0Cr25Al5样品相比,含Nb的0Cr21Al6Nb样品表现出更为均匀的晶粒尺寸分布,且平均晶粒尺寸稍小。不同取向的晶粒在合金丝中的分布存在差异,<110>取向晶粒的平均晶粒尺寸较大,而小尺寸的<110>取向晶粒占比较小。同时,不同成分合金丝径向不同位置处晶粒尺寸分布均匀性存在差异,0Cr21Al6Nb样品晶粒尺寸分布跨度较小,不同位置差异不显著,即晶粒尺寸分布对位置不敏感;0Cr25Al5样品晶粒尺寸分布跨度较大,且合金丝不同位置晶粒尺寸分布不同。综上表明,添加碳化物形成元素能明显降低合金丝中平均晶粒尺寸及促进晶粒尺寸分布均匀性;晶粒取向与晶粒尺寸及其在合金丝中的分布存在一定关联性,可为电热合金丝制备工艺优化、显微组织改善与综合性能提升提供一定参考。

关键词: 电热合金, FeCrAl合金, 0Cr25Al5合金, 0Cr21Al6Nb合金, 晶粒尺寸, 织构

Abstract: Property of electrothermal alloy is connected to its chemical composition, microstructure and texture. The microstructure of two commercial Fe-based electrothermal alloy wires (0Cr25Al5 alloy and 0Cr21Al6Nb alloy) was investigated, and the microstructural heterogeneity was analyzed with emphasis, then the relationship between chemical composition, texture, radial position of the alloy wire and the grain size distribution was discussed. The results show that comparing with 0Cr25Al5 alloy specimen, the 0Cr21Al6Nb alloy specimen containing Nb shows more homogeneous grain size distribution and lower average grain size. Different oriented grains show different size distribution, and <110> oriented grains have the higher average grain size, but small <110> oriented grains have the lower quantity. Moreover, the grain size distribution shows different dependence on the radial position in these two electrothermal alloy wires. The range of grain size value is lower in 0Cr21Al6Nb alloy specimen, and the grain size distribution is not sensible to the radial position. In comparison, much higher grain size value range is shown in 0Cr25Al5 specimen, and the microstructure varies at different positions. To conclude, it is deduced that the lower average grain size and more uniform microstructure could be achieved by the addition of carbide forming elements, and the relationship between chemical composition, texture, radial position and the grain size distribution of alloy wires could provide reference to the microstructure control and property optimization in electrothermal alloy production.

Key words: electrothermal alloy, FeCrAl alloy, 0Cr25Al5 alloy, 0Cr21Al6Nb alloy, grain size, texture

中图分类号:

TG132

张强, 祝志祥, 陈新, 张宁, 殷雪, 朱建新, 孟利. 铁基电热合金丝显微组织均匀性的对比分析[J]. 金属热处理, 2021, 46(4): 196-199.

Zhang Qiang, Zhu Zhixiang, Chen Xin, Zhang Ning, Yin Xue, Zhu Jianxin, Meng Li. Contrastive analysis of microstructural heterogeneity of Fe-based electrothermal alloy wires[J]. Heat Treatment of Metals, 2021, 46(4): 196-199.

参考文献

[1] 胡春霞,王晓军,王传玉,等.国内Cr20Ni80电热合金组织及性能对比研究[J].金属功能材料,2010,17(3):42-46.
Hu Chunxia,Wang Xiaojun,Wang Chuanyu,et al.Contrast and analysis of microstructure and properties of Cr20Ni80 electrical heating alloy in China[J].Metallic Functional Materials,2010,17(3):42-46.
[2] 朱日彰,卢亚轩.耐热钢和高温合金[M].北京:化学工业出版社,1996:154-155.
[3] 《电工材料应用手册》编委会.电工材料应用手册[M].北京:机械工业出版社,1993:38-43.
[4] 王振东,宫元生.电热合金[M].北京:化学工业出版社,2006.
[5] 武英,谢建刚,曾克里,等.Fe-Cr-Al电热合金的研究进展[J].有色金属,1999,51(4):83-86.
Wu Yin,XieJiangang,Zeng Keli,et al.Development of Fe-Cr-Al electrothermic alloy[J].Nonferrous Metals,1999,51(4):83-86.[6] Herbelin J M,Mantel M,Cogne J Y.Future trends of FeCrAl alloys for automotive catalytic converters to reach mass production[J].Materials Aspects in Automotive Catalytic Converters.Germany:Wiley-VCH,1997:79-92.
[7] 胡壮麟,刘丽荣,金涛,等.镍基单晶高温合金的发展[J].航空发动机,2005,31(3):1-7.
Hu Zhuanglin,Liu Lirong,Jin Tao,et al.Development of the Ni-base single crystal superalloys[J].Aeroengine,2005,31(3):1-7.
[8] 高军,李碚,吴双霞,等.钇抑制FeCrAl合金低脆性的作用与合金中铬、钇含量的关系[J].金属功能材料,1999,9(1):29-36.
Gao Jun,Li Bei,Wu Shuangxia,et al.Relations between the actions of yttrium inhibiting brittleness and the contents of chromium and yttrium in FeCrAl alloys[J].Metallic Functional Materials,1999,9(1):29-36.
[9] 李碚,吴双霞,李殿臣,等.Fe-Cr-Al合金的脆性和钇的作用[J].金属学报,1992,28(10):25-39.
Li Bei,Wu Shuangxia,Li Dianchen,et al.Embrittlement of Fe-Cr-A1 alloys and effect of yttrium addition[J].Acta Metallurgica Sinica,1992,28(10):25-39.
[10] Li Bei,Yan Yuxin,Meng Guang'en,et al.Effect of Y-containing phase in Fe-20Cr-4A1-Y alloys on microstructure and embrittlement[J].Journal of Materials Science and Technology,1991,7(1):40-46.
[11] 李碚,吴双霞,颜玉新,等.Fe15Cr4AlY合金中的Y-Fe相及其作用[J].中国稀土学报,1997,15(2):139-146.
Li Bei,Wu Shuangxia,Yan Yuxin,et al.Y-Fe phase and its effects on microstructure and properties in Fe15Cr4AlY alloys[J].Journal of the Chinese Society of Rare Earths,1997,15(2):139-146.
[12] 于梅花,张喜燕,朱玉涛,等.纳米结构错晶粒尺寸对费米能及费米速度的影响[J].稀有金属材料与工程,2009,38(7):1290-1291.
Yu Meihua,Zhang Xiyan,Zhu Yutao,et al.Influence of grain size on the fermi energy and fermi velocity of nanocrystalline zirconium[J].Rare Metal Materials and Engineering,2009,38(7):1290-1291.
[13] 李松瑞,周善初.金属热处理[M].长沙:中南大学出版社,2010:50-56.
[14] Giorgio S,Henry C R,Chapon C,et al.A high-resolution TEM study of the annealing of Pd particles supported on MgO[J].Journal of Catalysis,1994,148(2):534-539.
[15] Goyhenex C,Henry C R,Urban J.In-situ measurements of the lattice parameter of supported palladium clusters[J].Philosophical Magazine A,1994,69(6):1073-1084.

铁基电热合金丝显微组织均匀性的对比分析

Contrastive analysis of microstructural heterogeneity of Fe-based electrothermal alloy wires

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	连轶博, 杨春雷, 王国栋, 宋威. 固溶处理对GH4080A高温合金微观组织的影响[J]. 金属热处理, 2022, 47(4): 46-52.
[2]	陈刚, 罗小兵, 柴锋, 杨才福, 张正延, 杨丽. 轧制加热温度对高强度低合金钢组织及冲击性能的影响[J]. 金属热处理, 2022, 47(4): 116-121.
[3]	宿鹏吉, 麻永林, 董丽丽, 杨雪峰. 磁场预退火处理对CGO钢组织与织构的影响[J]. 金属热处理, 2022, 47(4): 128-132.
[4]	余世伦, 张孝军, 孔玢, 刘正乔, 余伟, 蒋孟玲. 退火工艺对冷轧工业纯钛带卷各向异性的影响[J]. 金属热处理, 2022, 47(3): 82-87.
[5]	张世进, 李凯, 易丹青, 刘会群. 冷轧TA5钛合金退火过程的再结晶行为及织构演变[J]. 金属热处理, 2022, 47(2): 1-8.
[6]	董丽丽, 麻永林, 宿鹏吉, 杨雪峰. 脉冲磁场热处理对CGO取向硅钢脱碳退火过程中组织和织构的影响[J]. 金属热处理, 2022, 47(2): 31-34.
[7]	杨劼, 任慧平, 刘宗昌. 15Cr12CuSiMoMn钢的奥氏体晶粒长大动力学[J]. 金属热处理, 2022, 47(2): 53-58.
[8]	代永娟, 武祥祥, 李佳坤, 国栋, 王波. 退火温度对Fe-24.38Mn-0.44C TWIP钢组织性能的影响[J]. 金属热处理, 2022, 47(2): 146-152.
[9]	李昂, 高坤元, 文胜平, 黄晖, 聂祚仁. 冷却条件对5E83铝合金搅拌摩擦焊接头组织与性能的影响[J]. 金属热处理, 2022, 47(1): 130-134.
[10]	强菲, 王文, 张婷, 杨娟, 蔡军, 王快社. Al-Zn-Mg-Cu铝合金厚板搅拌摩擦焊接头搅拌区微观组织[J]. 金属热处理, 2022, 47(1): 135-141.
[11]	许峰, 肖颖, 陈前, 邓长春, 孙晓寒. 冷轧压下率对IF钢微结构、织构及深冲性能的影响[J]. 金属热处理, 2022, 47(1): 250-254.
[12]	杜鹏举, 吴迪. 中锰钢中原奥氏体晶粒尺寸对马氏体相变的影响[J]. 金属热处理, 2021, 46(9): 21-27.
[13]	蒋莺鸽, 黄继武, 江福清, 许成龙. 冷轧方式和退火温度对Al-4Cu-0.73Mg合金织构和微观组织的影响[J]. 金属热处理, 2021, 46(9): 58-64.
[14]	宫浩, 孔德斌, 郭立娜, 韩洪文, 宫晶晶, 房洪杰. 中间退火处理对AlMgSiCu铝合金冷轧板组织性能的影响[J]. 金属热处理, 2021, 46(9): 129-132.
[15]	蒙曰睿, 赵贤平, 周博文. 基于铁素体轧制工艺低碳铝镇静钢板r值降低原因分析[J]. 金属热处理, 2021, 46(9): 211-215.