Download Articles

• Published in last 1 year | In last 2 years| In last 3 years| All| Most Downloaded in Recent Month | Most Downloaded in Recent Year|

  All

  Please wait a minute...
  

  For Selected: Download Citations EndNote Ris BibTeX Toggle Thumbnails

  Select

  Microstructure and properties of welded joint of high strength steel for automobiles Ban Xiaodong HTM    2014, 39 (5): 18-21.   doi:10.13251/j.issn.0254-6051.2014.05.005 Abstract （391）      PDF （155KB）（1756）       Knowledge map    Reference | Related Articles | Metrics

  Select

  BIAN Ji-Bu HTM    2010, 1 (1): 1-.   Abstract （1177）      PDF （632KB）（1316）       Knowledge map    Reference | Related Articles | Metrics

  Select

  Development priorities of heat treatment technology in our country Xu Yueming1, Li Qiao1, Luo Xinmin2 HTM    doi:10.13251/j.issn.0254-6051.2017.04.001

  Select

  Research and development of metal material advanced heat treatment equipment, technology and product Wang Guodong HTM    doi:10.13251/j.issn.0254-6051.2016.01.001

  Select

  CoCrCuFeMnNi high-entropy alloy coating prepared by plasma cladding on Q235 steel Lu Jinbin1, Peng Zhuqin2, Ma Mingxing2, Qi Zhendong2, Li Junkui2, He Yaxun2, Gong Zheng1 HTM    doi:10.13251/j.issn.0254-6051.2016.04.012

  Select

  Effects of heat treatment process on microstructure and hardness of TC4 titanium alloy Gan Zhanghua, Liang Yu, Wang Jinlin, Liu Jing HTM    doi:10.13251/j.issn.0254-6051.2014.09.009

  Select

  Effect of isothermal spheroidizing process on carbide spheroidization of high carbon steel Yu Bin1,2, Li Xiaoyuan2, Shi Jie2, Li Zhenhua1, Hu Jun2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.018

  Select

  Application of 40CrNiMoV steel to heavy section bearing Chen Chen1, Yang Zhinan2, Zhang Fucheng1 HTM    doi:10.13251/j.issn.0254-6051.2017.04.002

  Select

  Heat treatment process of 25MnB steel track board Zhao Ji, Du Chao HTM    doi:10.13251/j.issn.0254-6051.2015.10.043

  Select

  Grain boundary character in CoCrFeMnNi high-entropy alloy after cold rolling and subsequent annealing Tang Qunhua1，Cai Xiaoyong1，Dai Pinqiang1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.045

  Select

  Edge effect of DC glow?discharge plasma Feng Jun1,2, Chen Meiyan1, Jin Fanya1, Dan Min1, Nie Junwei1, Shen Liru1, Tong Honghui1, Lai Xinchun3 HTM    doi:10.13251/j.issn.0254-6051.2016.06.020

  Select

  Effect of wet shot peening on surface appearance and fatigue property of Ti-6Al-4V alloy Yin Xiaoning1, Fu Xuesong1, Chen Guoqing1, Zhou Wenlong 1, Gai Pengtao2, Li Zhiqiang2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.009

  Select

  Effect of heat treatment on microstructure and mechanical properties of 9Ni steel welded joints Zhang Min, Zhang Ming, Li Jihong HTM    doi:10.13251/j.issn.0254-6051.2016.06.023

  Select

  Influence of tempering temperature on microstructure and properties of 60Si2CrVAT spring steel Zhu Jie1,2, Yang Chunlin3,Jiang Yun2,Xu Ximin4, Ou Meigui1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.010

  Select

  Corrosion behavior of nitrogen-containing martensitic stainless bearing steel Zheng Shanju, Yang Maosheng , Lei Ting HTM    2014, 39 (1): 75-79.   Abstract （409）      PDF （169KB）（602）       Knowledge map    Reference | Related Articles | Metrics

  Select

  Heat treatment of high strength Al-Zn-Mg 7075 alloys Qin Guoshuai1, Yang Hansong2, He Chunxia2 HTM    doi:10.13251/j.issn.0254-6051.2015.12.020

  Select

  Effect of rolling temperature on microstructure and properties of AZ91 magnesium alloys Zheng Liuwei1,2,3, Zhao Zilong1,2, Wang Hongxia1,2, Liang Wei1,2 HTM    doi:10.13251/j.issn.0254-6051.2015.10.022

  Select

  Failure analysis on connecting rod bolts of hydrogen compressor in a reforming device Wang Pengfei1,2,3, Liu Yan1,2,3, Wang Weiqiang1,2,3, Zhang Ming1,2,3, Qu Yanpeng1,2,3, Zhang Zhaokuan4 HTM    doi:10.13251/j.issn.0254-6051.2016.02.047

  Select

  Research progress on grain boundary character distribution optimization of face-centered cubic metal Ma Cong1, Liu Feng1, Lian Jingbao1,Yao Lingliang2 HTM    doi:10.13251/j.issn.0254-6051.2015.10.011

  Select

  Comparison of grain size measuring methods for SWRH72A tire cord steel Xiao Xuan, Chen Min HTM    doi:10.13251/j.issn.0254-6051.2016.04.045