Effect of post weld heat treatment on bending property of welded joints of TA15 titanium alloy plate

doi:10.13251/j.issn.0254-6051.2024.02.027

Abstract

Abstract: Effect of different annealing processes on the bending property of the welded joint of TA15 titanium alloy plate was studied. Through microstructure analysis, the microstructure transformation process of the welded joint with the change of heating temperature and holding time was explored. The effect of microstructure change on the bending property of welded joints through ultimate bending tests was verified, and ultimately the optimal annealing process was determined. The results indicate that the welded joint of the TA15 titanium alloy plate exhibits a typical columnar grain structure with needle-like α phases are distributed in different directions, and the welded joint has poor plasticity and poor bending property. Using general post weld stabilization annealing treatment (750 ℃×90 min and 750 ℃×120 min) can alleviate the welding stress, but with no significant improvement in microstructure and properties of the welded joint, which fails to effectively enhance the bending property. After annealing at 850 ℃ for 120 min with furnace cooling, the microstructure of welded joint is significantly improved, and at the same time, the bending property is improved.

Key words: TA15 titanium alloy, weld microstructure, bending property, annealing

CLC Number:

TG113.2

Zhu He, Liu Yanmei, Zhao Dong, Yang Lixin, Lu Yingfeng, Zhao Hongbo. Effect of post weld heat treatment on bending property of welded joints of TA15 titanium alloy plate[J]. Heat Treatment of Metals, 2024, 49(2): 179-182.

References

[1]刘奇先, 刘杨, 高凯. 钛合金的研究进展与应用[J]. 航天制造技术, 2011(4): 45-48.
Liu Qixian, Liu Yang, Gao Kai. Research progress and application of titanium alloys[J]. Aerospace Manufacturing Technology, 2011(4): 45-48.
[2]黄旭, 朱知寿, 王红红. 先进航空钛合金材料与应用[M]. 北京: 国防工业出版社, 2012: 26-27.
[3]《中国航空材料手册》编辑委员会. 中国航空材料手册[M]. 北京: 中国标准出版社, 2002.
[4]张小红, 林鑫, 陈静, 等. 热处理对激光立体成形TA15合金组织及力学性能的影响[J]. 稀有金属材料与工程, 2011, 40(1): 142-147.
Zhang Xiaohong, Lin Xin, Chen Jing, et al. Effects of heat treatment on the microstructures and mechanical properties of TAl5 titanium alloys by laser solid forming[J]. Rare Metal Materials and Engineering, 2011, 40(1): 142-147.
[5]赵彦蕾, 李伯龙, 朱知寿, 等. 热处理温度对TC21钛合金微观组织的影响[J]. 材料热处理学报, 2011, 32(1): 14-18.
Zhao Yanlei, Li Bolong, Zhu Zhishou, et al. Influence of heat treatment on microstructure of TC21 titanium alloy[J]. Transactions of Materials and Heat Treatment, 2011, 32(1): 14-18.
[6]卢凯凯, 周立鹏, 李敏娜. 强韧化热处理对TA15钛合金组织和性能的影响[J]. 材料热处理学报, 2020, 41(1): 44-49.
Lu Kaikai, Zhou Lipeng, Li Minna. Effect of strengthening and toughening heat treatment on microstructure and mechanical properties of TA15 titanium alloy[J]. Transactions of Materials and Heat Treatment, 2020, 41(1): 44-49.
[7]陈国庆, 张秉刚, 王廷, 等. TA15钛合金潜弧焊接头组织与性能分析[J]. 焊接学报, 2010, 31(7): 5-8.
Chen Guoqing, Zhang Binggang, Wang Ting, et al. Microstructure and mechanical properties of submerged arc welded TA15 titanium alloy joints[J]. Transactions of the China Welding Institution, 2010, 31(7): 5-8.
[8]朱景川, 何东, 杨夏炜, 等. TA15钛合金双重热处理工艺及其微观组织演化的EBSD研究[J]. 稀有金属材料与工程, 2013, 42(2): 382-386.
Zhu Jingchuan, He Dong, Yang Xiawei, et al. EBSD study on dual heat treatment and microstructure evolution of TA15 titanium alloy[J]. Rare Metal Materials and Engineering, 2013, 42(2): 382-386.

[1]	Hu Qiwen, Li Tianyi, Geng Xiaoxiao, Cheng Zhuo, Liu Wenyue, Wu Guilin. Effect of annealing process on microstructure and properties of Fe-30Mn-10Al-1C low density steel [J]. Heat Treatment of Metals, 2024, 49(2): 91-97.
[2]	Zhang Zhi, Luo Dengchao, Li Xusheng, Li Qian, Liang Jiawei, Su Songlin, Ren Weining, Wang Sha. Effect of heat treatment temperature on microstructure and properties of TA15 titanium alloy pipe [J]. Heat Treatment of Metals, 2024, 49(2): 195-198.
[3]	Li Dongyang, Li Yanxia. Homogenization annealing process of Al-Si-Mg-B-Sr alloy [J]. Heat Treatment of Metals, 2024, 49(2): 199-202.
[4]	Wang Fuxue, Li Jiahui, Wang Qiang, Wang Hongtao. Effect of surface mechanical rolling treatment on microstructure and mechanical properties of annealed TWIP steel [J]. Heat Treatment of Metals, 2024, 49(2): 274-280.
[5]	Zhu Jiawu, Ouyang Sheng. Effect of annealing on microstructure, mechanical properties and magnetic properties of FeCoNi_2-xMnGa_x high-entropy alloys [J]. Heat Treatment of Metals, 2024, 49(1): 22-31.
[6]	Li Zhiping, Wang Hongxia, Zhao Gang, Wang Junhai. Effect of annealing process on microstructure and properties of T4003 high strength ferritic stainless steel [J]. Heat Treatment of Metals, 2024, 49(1): 198-201.
[7]	Fan Mingqiang, Zhao Yingli, Li Sufang, Liang Jia, Wang Chao, Xu Junjun, Wang Jianqiang, Zhao Zhengrong. Effect of diffusion annealing on microstructure and component segregation of H13 steel [J]. Heat Treatment of Metals, 2024, 49(1): 211-214.
[8]	Yang Yuanyuan, Wang Dong, Huang Li, Liu Baozhi. Comparison of HiB and CGO orientation silicon steels and its normalizing annealing process [J]. Heat Treatment of Metals, 2024, 49(1): 228-234.
[9]	Li Zhikang, Wang Quanwei, Shen Xiaofeng, Huang Jiao, Fan Lifeng, Ma Wen, Zhang Pengxing. Effect of annealing on porosity of Cr coating on zirconium alloy surface [J]. Heat Treatment of Metals, 2024, 49(1): 262-267.
[10]	Zeng Yongmou, Liu Ying, Liu Ziyuan, Hu Menghan, Cao Yu. Effect of annealing temperature and cold deformation on microstructure and properties of 3003 aluminum alloy plate for power battery shell [J]. Heat Treatment of Metals, 2023, 48(9): 70-74.
[11]	Han Weisong, Du Feng, Li Jianfeng, Zhu Baohui, Shen Lihua, Liu Yi, Wang Peng. Effect of deformation on mechanical properties of Ti80G alloy [J]. Heat Treatment of Metals, 2023, 48(9): 95-98.
[12]	Liu Yongzhen, Dong Lili, Liu Baozhi, Zhang Hao, Ma Yonglin. Evolution of microstructure and macrotexture of 3.1%Si oriented silicon steel [J]. Heat Treatment of Metals, 2023, 48(9): 238-241.
[13]	Kang Cong, Jiao Zhen, Mu Botao, Ren Chiqiang, Gao Wenchao, Li Wei, Yun Pengfei, Ouyang Wenbo. Effect of annealing treatment on microstructure and mechanical properties of Ti6321 alloy [J]. Heat Treatment of Metals, 2023, 48(8): 149-153.
[14]	Zhou Zeyu, Han Mingming, Xiao Xiang, Fu Jinlai. Effect of annealing process on microstructure and natural aged properties of 7X50 aluminum alloy wire [J]. Heat Treatment of Metals, 2023, 48(8): 161-165.
[15]	Liu Lei, Guo Feihu, Shi Pengzhao, Qiao Jialong, Qiu Shengtao. Effect of primary recrystallization annealing temperature on microstructure and texture of low temperature Hi-B steel [J]. Heat Treatment of Metals, 2023, 48(7): 8-14.