超声喷丸对镁合金表面高熵合金涂层组织与性能的影响

doi:10.13251/j.issn.0254-6051.2025.03.046

金属热处理 ›› 2025, Vol. 50 ›› Issue (3): 291-296.DOI: 10.13251/j.issn.0254-6051.2025.03.046

超声喷丸对镁合金表面高熵合金涂层组织与性能的影响

李如庆, 王世宇, 闫福铎, 郭鹏宇, 杨会凯, 赵金阳, 殷凤仕

山东理工大学机械工程学院, 山东淄博 255000

收稿日期:2024-09-19 修回日期:2025-01-26 出版日期:2025-03-25 发布日期:2025-05-14
通讯作者: 殷凤仕,教授,博士,E-mail:Fsyin@sdut.edu.cn
作者简介:李如庆(1998—),男,硕士,主要研究方向为表面防护与增材制造,E-mail:1651906933@qq.com。

Effect of ultrasonic shot peening on microstructure and properties of high entropy alloy coating prepared on magnesium alloy

Li Ruqing, Wang Shiyu, Yan Fuduo, Guo Pengyu, Yang Huikai, Zhao Jinyang, Yin Fengshi

School of Mechanical Engineering, Shandong University of Technology, Zibo Shandong 255000, China

Received:2024-09-19 Revised:2025-01-26 Online:2025-03-25 Published:2025-05-14

摘要/Abstract

摘要： 研究了超声喷丸强化对镁合金表面制备的NiCoAlFeCrMoSi高熵合金涂层的影响,以提高涂层的耐腐蚀性和耐磨性。结果表明,随超声喷丸时间的延长(0~800 s),涂层的表面粗糙度先降低后升高,孔隙率降低,耐蚀性和耐磨性呈现先增强后减弱趋势。当超声喷丸时间为400 s时,涂层具有最好的耐磨性和耐蚀性,与未经喷丸处理的涂层相比,表面平均硬度增大50 HV0.2,表面粗糙度降低了53.82%,腐蚀电流密度从3.012×10^-5 A/cm²降低至9.80 μA/cm²,磨损体积减少了26.8%。

关键词: 涂层, 超声喷丸, 表面粗糙度, 耐磨性, 耐蚀性

Abstract: Effect of ultrasonic shot peening on NiCoAlFeCrMoSi high entropy alloy coating prepared on the surface of magnesium alloy was investigated in order to enhance the corrosion and wear resistance of the coating. The results show that with the increase of ultrasonic shot peening time (0-800 s), the surface roughness of the coating decreases and then increases, the porosity decreases, and the corrosion resistance and wear resistance show a trend of first increasing and then decreasing. When the ultrasonic shot peening time is 400 s, the coating has the best corrosion resistance and wear resistance. Compared with the coating that is not shot peened, the average surface hardness is increased by 50 HV0.2, the surface roughness reduced by 53.82%, the corrosion current density decreases from 3.012×10^-5 A/cm² to 9.80 μA/cm², and the wear volume is reduced by 26.8%.

Key words: coating, ultrasonic shot peening, surface roughness, corrosion resistance, wear resistance

中图分类号:

TG172.3

李如庆, 王世宇, 闫福铎, 郭鹏宇, 杨会凯, 赵金阳, 殷凤仕. 超声喷丸对镁合金表面高熵合金涂层组织与性能的影响[J]. 金属热处理, 2025, 50(3): 291-296.

Li Ruqing, Wang Shiyu, Yan Fuduo, Guo Pengyu, Yang Huikai, Zhao Jinyang, Yin Fengshi. Effect of ultrasonic shot peening on microstructure and properties of high entropy alloy coating prepared on magnesium alloy[J]. Heat Treatment of Metals, 2025, 50(3): 291-296.

参考文献

[1] 丛家慧, 王磊. 超声喷丸表面强化技术的研究现状与应用进展[J]. 机械工程材料, 2019, 43(5): 1-5.
Cong Jiahui, Wang Lei. Research status and application progress of ultrasonic shot peening surface strengthening technology[J]. Materials for Mechanical Engineering, 2019, 43(5): 1-5.
[2] Agrawal R K, Pandey Vaibhav, Barhanpurkar-Naik Amruta, et al. Effect of ultrasonic shot peening duration on microstructure, corrosion behavior and cell response of cp-Ti[J]. Ultrasonics, 2020, 104: 106114.
[3] Pramod K, Mahobia G S, Mandal S, et al. Enhanced corrosion resistance of the surface modified Ti-13Nb-13Zr alloy by ultrasonic shot peening[J]. Corrosion Science, 2021, 189: 109597.
[4] Chen Bin, Huang Binxiang, Liu Hai, et al. Surface nanocrystallization induced by shot peening and its effect on corrosion resistance of 6061 aluminum alloy[J]. Journal of Materials Research, 2014, 29(24): 3002-3010.
[5] Pandey V, Singh J K, Chattopadhyay K, et al. Optimization of USSP duration for enhanced corrosion resistance of AA7075[J]. Ultrasonics, 2019, 91: 180-192.
[6] Zhang Liuyan, Zhang Yanzhao, Wu Huishu, et al. Structure and corrosion behavior of cold-sprayed Cu/Ni composite coating post-treated by ultrasonic shot peening[J]. SN Applied Sciences, 2020, 2(2): 1-14.
[7] Kushwaha A, Basu A. Effect of peening parameters on the ultrasonic shot-peened surfaces of electro-co-deposited Ni/Ni-TiO₂ coatings[J]. Journal of Materials Engineering and Performance, 2023, 32: 9525-9539.
[8] 刘伦乾, 田宗军, 王东生, 等. 激光重熔对TiAl合金表面等离子喷涂热障涂层耐热腐蚀性能的影响[J]. 热处理技术与装备, 2009, 30(5): 23-26.
Liu Lunqian, Tian Zongjun, Wang Dongsheng, et al. Effects of laser-remelting on hot corrosion resistance of plasma-sprayed thermal barrier coatings in surface of TiAl alloy[J]. Heat Treatment Technology and Equipment, 2009, 30(5): 23-26.
[9] 洪永昌. 激光重熔扫描速度对Co基合金堆焊层组织及耐磨性的影响[J]. 中国机械工程, 2004, 15(20): 1876-1879.
Hong Yongchang. Effects of scanning speeds on microstructure and wearability of Co-based hardface layer in laser remelting[J]. China Mechanical Engineering, 2004, 15(20): 1876-1879.
[10] 洪督, 黄利平, 黄山松, 等. 渗碳处理对等离子喷涂TaC涂层结构和物相组成的影响[J]. 热喷涂技术, 2023, 15(2): 13-18.
Hong Du, Huang Liping, Huang Shansong, et al. Effect of carburizing treatment on microstructure and phase composition of TaC coating prepared by plasma spray[J]. Thermal Spray Technology, 2023, 15(2): 13-18.
[11] 曹登驹, 江涛. 一种新型防渗碳涂料[J]. 金属热处理, 2003, 28(6): 68-70.
Cao Dengju, Jiang Tao. A new kind of anti-carburizing paint[J]. Heat Treatment of Metals, 2003, 28(6): 68-70.
[12] 何晓荣, 黎秋萍, 刘少鹏, 等. Cr12MoV模具钢渗氮层服役过程中不同磨损阶段的摩擦学特性[J]. 表面技术, 2022, 51(8): 243-251.
He Xiaorong, Li Qiuping, Liu Shaopeng, et al. Tribological properties of nitriding layer of Cr12MoV die steel in different wear stages during service[J]. Surface Technology, 2022, 51(8): 243-251.
[13] Vignesh S, Shanmugam K, Balasubramanian V, et al. Identifying the optimal HVOF spray parameters to attain minimum porosity and maximum hardness in iron based amorphous metallic coatings[J]. Defence Technology, 2017, 12(2): 101-110.

[1]	肖永强, 杜贵祥, 祝伟, 陈甥怡, 罗德福. PIP工艺对粉末冶金FN04Mo钢性能的影响[J]. 金属热处理, 2025, 50(3): 81-89.
[2]	常剑秀, 张露, 柳琪, 李珂尧, 宋佳星, 曹培培, 彭祥阳. 烧结温度对WC-HEA硬质合金组织结构和摩擦学性能的影响[J]. 金属热处理, 2025, 50(3): 90-95.
[3]	邹琛, 周凡, 周根树. Ti纳米颗粒浓度对AZ91D镁合金表面微弧氧化膜层耐蚀性的影响[J]. 金属热处理, 2025, 50(3): 263-269.
[4]	张香云, 丁国强, 袁子洲. 热处理对冷喷涂铁基非晶涂层耐腐蚀性能的影响[J]. 金属热处理, 2025, 50(3): 270-276.
[5]	李月琛, 顾晋, 张林, 谢焕钧, 郑军, 袁静. 等离子体渗氮对钛合金表面镀渗Ti-N复合改性层组织性能的影响[J]. 金属热处理, 2025, 50(3): 277-283.
[6]	刘军, 纪乙智, 李巍, 廖斌, 曹志刚, 黄修喜, 刘思晔, 董会. 真空热处理超音速火焰喷涂制备Ni基WC涂层的结构与耐磨性[J]. 金属热处理, 2025, 50(3): 284-290.
[7]	王庆田, 满蛟, 王俊成, 刘庚根, 杨斌. WC含量对AlCrFe₂Ni₂Mo_0.9高熵合金涂层组织及耐磨性的影响[J]. 金属热处理, 2025, 50(2): 282-291.
[8]	代春朵, 李江文, 郭呈宇, 张勇, 孙美慧, 李天怡, 巩俐, 潘悦. 高强耐蚀铁基中熵合金的组织与性能[J]. 金属热处理, 2025, 50(1): 12-21.
[9]	滕宏胤, 王银军, 吴索团. 不同材料夹送辊堆焊层退火处理后的组织及性能对比[J]. 金属热处理, 2025, 50(1): 155-161.
[10]	曹驰, 张翔, 陈志林, 陈东升, 张琢. 316L不锈钢离子渗氮/PVD复合改性层的组织与性能[J]. 金属热处理, 2025, 50(1): 299-307.
[11]	闫源, 李秀红, 李启航, 王德龙, 李文辉. 滚磨光整加工/QPQ复合处理对TC4钛合金耐磨性的影响[J]. 金属热处理, 2025, 50(1): 317-324.
[12]	司艳, 吴业琼, 晁国涛, 李洁, 黄璇璇, 郭双全, 李曙光. 扩散制度对镍基高温合金双相铂铝涂层的影响[J]. 金属热处理, 2025, 50(1): 332-336.
[13]	孙陶安, 吴正义, 周继顺, 肖丙政, 王海川, 范鼎东, 邓爱军. Mo含量对高碳钢组织和耐磨性的影响[J]. 金属热处理, 2024, 49(9): 64-71.
[14]	张宏亮, 王明欣, 张京兵, 李玉涛, 金头男. TiC含量对AlCoCrFeNi高熵合金熔覆层组织与耐磨性的影响[J]. 金属热处理, 2024, 49(9): 275-279.
[15]	刘海量, 徐自立, 刘洋, 胡嘉彬. 45钢表面双辉等离子渗铝处理[J]. 金属热处理, 2024, 49(9): 280-283.

超声喷丸对镁合金表面高熵合金涂层组织与性能的影响

Effect of ultrasonic shot peening on microstructure and properties of high entropy alloy coating prepared on magnesium alloy

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价