淬火与回火工艺对42CrMo钢显微组织和奥氏体晶粒长大规律的影响

doi:10.13251/j.issn.0254-6051.2023.01.031

金属热处理 ›› 2023, Vol. 48 ›› Issue (1): 181-185.DOI: 10.13251/j.issn.0254-6051.2023.01.031

淬火与回火工艺对42CrMo钢显微组织和奥氏体晶粒长大规律的影响

李鸿娟^1,2,3, 向成功³, 吴琼², 王正才¹

1.宁波职业技术学院, 浙江宁波 315800;
2.瓦房店轴承集团有限公司, 辽宁瓦房店 116300;
3.湖南人文科技学院, 湖南娄底 417000

收稿日期:2022-08-17 修回日期:2022-11-08 出版日期:2023-01-25 发布日期:2023-02-03
作者简介:李鸿娟(1987—),女,博士,主要研究方向为先进钢铁材料开发及应用,E-mail:574193213@qq.com。
基金资助:
宁波职业技术学院国家级科研项目培育课题(NZ22GJ012);湖南省双一流学科建设项目(湘教通[2018]469);湖南省教育厅优秀青年项目(21B0787)

Effect of quenching and tempering process on microstructure and austenite grain growth of 42CrMo steel

Li Hongjuan^1,2,3, Xiang Chenggong³, Wu Qiong², Wang Zhengcai¹

1. Ningbo Polytechnic, Ningbo Zhejiang 315800, China;
2. Wafangdian Bearing Group Co., Ltd., Wafangdian Liaoning 116300, China;
3. Hunan University of Humanities, Science and Technology, Loudi Hunan 417000, China

Received:2022-08-17 Revised:2022-11-08 Online:2023-01-25 Published:2023-02-03

摘要/Abstract

摘要： 研究了860~940 ℃淬火与200~600 ℃回火对42CrMo钢显微组织的影响,并用金相截线法对奥氏体晶粒尺寸进行测量,建立了42CrMo钢奥氏体晶粒生长动力学方程。结果表明,随着淬火温度和保温时间的增加,42CrMo钢中残留碳化物数量明显减少,碳化物由片状逐渐变为颗粒状。随着淬火温度的升高,板条马氏体组织变得越来越均匀细小。随着回火温度的升高,钢的显微组织向回火屈氏体、回火索氏体转变,当回火温度为600 ℃时,得到的回火索氏体组织更均匀密集。基于Beck模型的42CrMo钢奥氏体晶粒生长规律的拟合结果,得出奥氏体晶粒长大激活能为2.62×10³ J·mol^-1。

关键词: 42CrMo钢, 淬火, 回火, 显微组织, 奥氏体晶粒

Abstract: Effect of 860-940 ℃ quenching and 200-600 ℃ tempering processes on microstructure of 42CrMo steel was studied, the austenite grain size of the steel was measured by using metallographic linear intercept method, and the austenite grain growth kinetic equation of the steel was established. The results show that with the increase of quenching temperature and holding time, the number of residual carbides in the 42CrMo steel decreases obviously, and the carbides gradually change from flake to granular. With the increase of quenching temperature, the lath martensite becomes more and more uniform and fine.With the increase of tempering temperature, the microstructure of the steel changes to tempered troostite and tempered sorbite. When the tempering temperature is 600 ℃, the tempered sorbite is more uniform and dense. The fitting results of austenite grain growth of the 42CrMo steel based on Beck model shows that the activation energy of austenite grain growth is 2.62×10³J·mol^-1。

Key words: 42CrMo steel, quenching, tempering, microstructure, austenite grain

中图分类号:

TG156

李鸿娟, 向成功, 吴琼, 王正才. 淬火与回火工艺对42CrMo钢显微组织和奥氏体晶粒长大规律的影响[J]. 金属热处理, 2023, 48(1): 181-185.

Li Hongjuan, Xiang Chenggong, Wu Qiong, Wang Zhengcai. Effect of quenching and tempering process on microstructure and austenite grain growth of 42CrMo steel[J]. Heat Treatment of Metals, 2023, 48(1): 181-185.

参考文献

[1]刘健, 谢勇, 刘广明, 等. 变形工艺参数对热轧态42CrMo钢组织及性能的影响[J]. 热加工工艺, 2019, 48(19): 129-131.
Liu Jian, Xie Yong, Liu Guangming, et al. Influence of deformation parameters on microstructure and properties of hot rolled 42CrMo steel[J]. Hot Working Technology, 2019, 48(19): 129-131.
[2]杨敏, 崔冕, 李占阳, 等. 回火温度对42CrMo钢金相组织及力学性能的影响[J]. 现代冶金, 2019, 47(1): 4-5.
[3]宋博, 马红梅. 等温淬火回火温度对60Si2CrVAT弹簧钢显微组织的影响[J]. 铸造技术, 2013, 34(4): 58-60.
Song Bo, Ma Hongmei. Effect of austempering and tempering temperature on microstructure of 60Si2CrVA spring steel[J]. Foundry Technology, 2013, 34(4): 58-60.
[4]舒志强, 袁鹏斌, 欧阳志英, 等. 回火温度对26CrMo钻杆钢显微组织和力学性能的影响[J]. 金属学报, 2017, 53(6): 669-676.
Shu Zhiqiang, Yuan Pengbin, Ouyang Zhiying, et al. Effects of tempering temperature on microstructure and mechanical properties of drill pipe steel 26CrMo[J]. Acta Metallurgica Sinica, 2017, 53(6): 669-676.
[5]鲍姚亮, 岑启宏, 蒋业华, 等. 淬火温度对高硼高速钢显微组织的影响[J]. 材料热处理学报, 2012, 23(7): 75-78.
Bao Yaoliang, Cen Qihong, Jiang Yehua, et al. Effect of quenching temperature on microstructure of high-boron high speed steel[J]. Transactions of Materials and Heat Treatment, 2012, 23(7): 75-78.
[6]杨栋杰. 35CrMo钢热处理工艺参数的研究[J]. 机械工程师, 2016(12): 132-133.
[7]姜婷, 汪开忠, 于同仁, 等. 热处理工艺对弹簧钢55SiCrV力学性能和组织的影响[J]. 金属热处理, 2019, 44(10): 104-107.
Jiang Ting, Wang Kaizhong, Yu Tongren, et al. Effect of heat treatment process on mechanical properties and microstructure of 55SiCrV spring steel[J]. Heat Treatment of Metals, 2019, 44(10): 104-107.
[8]曹云飞, 余伟, 刘敏, 等. 38MnSiVS非调质钢奥氏体晶粒长大模型[J]. 钢铁, 2020, 55(5): 103-108.
Cao Yunfei, Yu Wei, Liu Min, et al. Austenite grain growth model of 38MnSiVS bearing microalloyed forging steel[J]. Iron and Steel, 2020, 55(5): 103-108.
[9]李伟, 陈文琳, 吴跃, 等. 42CrMo钢加热时奥氏体晶粒长大演化规律[J]. 材料热处理学报, 2015, 36(1): 104-108.
Li Wei, Chen Wenlin, Wu Yue, et al. Austenite grain growth behaviour of 42CrMo steel during heating[J]. Transactions of Materials and Heat Treatment, 2015, 36(1): 104-108.
[10]Duan Linna, Wang Jiman, Liu Qingyou, et al. Austenite grain growth behavior of X80 pipeline steel in heating process[J]. Journal of Iron and Steel Research International, 2010, 17(3): 62-66.
[11]卢威, 万珍珍, 金莹. 25Cr2Mo1VA钢奥氏体晶粒长大规律探讨[J]. 钢铁, 2020, 55(3): 96-103.
Lu Wei, Wan Zhenzhen, Jin Ying. Austenite grain growth behavior in 25Cr2Mo1VA steel[J]. Iron and Steel, 2020, 55(3): 96-103.

[1]	邓煜华, 黎振华, 姚碧波, 滕宝仁, 李颢. 热处理对选区激光熔化钴铬合金组织与性能的影响[J]. 金属热处理, 2023, 48(1): 23-28.
[2]	顾海, 张捷, 孙健华, 吴国庆, 孙中刚. 激光熔化沉积2195铝锂合金微观组织演变及力学性能[J]. 金属热处理, 2023, 48(1): 52-59.
[3]	赵政翔, 李静媛, 廖露海, 徐芳泓, 张威. 超级奥氏体不锈钢654SMO在900 ℃下的时效析出行为[J]. 金属热处理, 2023, 48(1): 68-74.
[4]	赵帅, 李青春, 安昊瀛, 陈淑英, 常国威. Cr13Ni4Mo钢逆转变奥氏体的形成及其对性能的影响[J]. 金属热处理, 2023, 48(1): 95-99.
[5]	陈晶阳, 任晓冬, 张明军, 张丽辉, 汤鑫, 肖程波. 铸造镍基高温合金K439B的组织及典型性能[J]. 金属热处理, 2023, 48(1): 100-104.
[6]	张显武, 丁雅莉, 杨卓越, 高齐, 王胜民. 改善中碳Cr-Mn-Si钢淬透性的合金化研究[J]. 金属热处理, 2023, 48(1): 112-114.
[7]	王文正, 马永福, 马劲红, 张桂营, 田亚强, 程新超, 李红斌, 陈连生. Q355D热轧H型钢的CCT曲线及冲击性能[J]. 金属热处理, 2023, 48(1): 127-132.
[8]	元亚莎, 汪雨昌, 王文焱, 石如星, 元莎, 张玉栋. 回火温度对55NiCrMoV7热作模具钢组织和性能的影响[J]. 金属热处理, 2023, 48(1): 133-138.
[9]	张家豪, 陈连生, 高天洋, 徐海卫, 韩赟, 李红斌, 田亚强. 过时效温度对连续退火制备DP1180钢组织性能的影响[J]. 金属热处理, 2023, 48(1): 149-154.
[10]	戴建科, 韩顺, 厉勇, 刘雨, 雷斯敏, 王春旭. 淬火温度对新型齿轮钢组织及力学性能的影响[J]. 金属热处理, 2023, 48(1): 163-168.
[11]	赵培林, 杨栋, 吴会亮, 刘超, 李超, 李春传, 郑力. 正火处理对建筑结构用超厚规格H型钢抗层状撕裂性能的影响[J]. 金属热处理, 2023, 48(1): 175-180.
[12]	卢晓禹, 董磊, 黄利, 刘宝志. 高磁感取向硅钢27QG090的常化退火工艺[J]. 金属热处理, 2023, 48(1): 186-189.
[13]	孙永真, 程巨强, 赵翛涵. 回火温度对40CrMoVNbTi钢组织和性能的影响[J]. 金属热处理, 2023, 48(1): 193-197.
[14]	杨胶溪, 黄凯, 武飞宇, 孙宏波, 阳代军, 李曙光, 葛学元, 王淼辉. Mg-Gd-Y-Zr镁合金高速激光熔覆Al-Si涂层的组织与性能[J]. 金属热处理, 2023, 48(1): 217-223.
[15]	赵全育, 梁嘉俊, 陈旭鹏, 童波, 夏国华, 严琴, 丁志敏. 42CrMo钢六角头螺栓热镀锌裂纹分析[J]. 金属热处理, 2023, 48(1): 257-260.

淬火与回火工艺对42CrMo钢显微组织和奥氏体晶粒长大规律的影响

Effect of quenching and tempering process on microstructure and austenite grain growth of 42CrMo steel

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价