Volumn Content

• Heat Treatment of Metals 2016 Vol.41 Please wait a minute... For Selected: Download Citations EndNote Ris BibTeX Toggle Thumbnails Select Research and development of metal material advanced heat treatment equipment, technology and product Wang Guodong HTM    doi:10.13251/j.issn.0254-6051.2016.01.001 Select Application of new heat treatment technologies in high performance stainless steel development and production Wang Yide，Fan Guangwei HTM    doi:10.13251/j.issn.0254-6051.2016.01.002 Select Application of external field treatment for microstructure controlling of nickel-base superalloy Wang Lei1，Liu Yang1，Song Xiu1，Wang Yao1，Xu Guohua2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.003 Select Application of MQ-P-T processes proposed to Fe-2.4C-12Cr balls Dong Dashan1, Jia Xiaoshuai1,Zuo Xunwei2, Chen Nailu2, Rong Yonghua2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.004 Select Influence of high temperature annealing process on Goss texture and magnetic property of CGO silicon steel Dang Ning1, ZhangWenkang2, Li Zhichao1, Sun Qiang1 HTM    doi:10.13251/j.issn.0254-6051.2016.01.005 Select Influences of pretreatment process on microstructure and hardness of hot-work die steel 5Cr8MoNi2SiV Zhao Chengzhi1，Jin Tianwen1, Fu Cehu1, Zhang Hexin1, Zhou Peichao2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.006 Select low temperature plasma hardening treatment forduplex stainless steel Wang Yonglei1，Niu Qiang1，Han Boqun2，Zhao Cheng1 HTM    doi:10.13251/j.issn.0254-6051.2016.01.007 Select Tempering process of Cr12MoV die steel Deng Xiaohu1，Ju Dongying2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.008 Select Induction hardening process of 42CrMo steel driving axle Zhang Shenjie, Li Ruiqing, Kong Chunhua, Liu Jinying, Ma Ge HTM    doi:10.13251/j.issn.0254-6051.2016.01.009 Select Heat treatment of 60Mn-20 steel composite steel pipe Feng Mingxing,Li Xiangsong HTM    doi:10.13251/j.issn.0254-6051.2016.01.010 Select Effect of solid solution treatment on microstructure and hardness of Haynes282 heat resistant alloy Liu Qiangyong1,2, Liu Zhengdong2, Gan Guoyou1, Tian Zhongliang2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.011 Select Effect of aging treatment on microstructure and mechanical properties of AM355 steel Hu Jiaqi1, 2, Liu Rongpei1, Liang Jianxiong2, Wang Changjun2, Yang Zhiyong2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.012 Select Effect of aging on properties of GH2132 alloy for engine bolt Fan Kailun1, Zou Gang2, Pei Lieyong1, Liu Yongde1,Xu Tao1 HTM    doi:10.13251/j.issn.0254-6051.2016.01.013 Select Effects of thermomechanical treatment on microstructure and mechanical properties of casting tin bronze You Long1, Yi Yongzhen1, Wang Keke2, Yang Huihui1 HTM    doi:10.13251/j.issn.0254-6051.2016.01.014 Select Effect of cooling process on microstructure and properties of Ti-microalloyed high-strength steel Zhang Liping1, Liu Yanlin1, Han Jie1, Li Junyu2, Xu Rongchang1 HTM    doi:10.13251/j.issn.0254-6051.2016.01.015 Select Effect of heat treatment on microstructure and properties of steel Cr8 Zhang Yan，Zhao Aimin，He Jianguo，Yin Hongxiang，Zhi Chao HTM    doi:10.13251/j.issn.0254-6051.2016.01.016 Select Effect of heat treatment on microstructure and properties of LF2 alloy Xue Chengcheng1,2, Wang Limin2, Jiang Yehua1, Liu Zhengdong2, Yang Gang2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.017 Select Effect of isothermal spheroidizing process on carbide spheroidization of high carbon steel Yu Bin1,2, Li Xiaoyuan2, Shi Jie2, Li Zhenhua1, Hu Jun2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.018 Select Heat treatment process of TC25 alloy sheets Wang Yuan, Dong Jian, Guan Yulong, Yu Zhongliang HTM    doi:10.13251/j.issn.0254-6051.2016.01.019 Select Effects of heat treatment on microstructure and properties of new aluminum-nickel bronze alloy Sun Menglong, Xie Chunsheng HTM    doi:10.13251/j.issn.0254-6051.2016.01.020 Select Effect of heat treatment on microstructure and mechanical properties of TRIP steel Pan Hongbo1，Yan Jun1，Liu Yonggang2，Zhan Hua2，Chi Zhitao2，Ding Wei3 HTM    doi:10.13251/j.issn.0254-6051.2016.01.021 Select Effect of RE on prior austenite grain size and Nb-Ti solid solution for low carbon high niobium steel Geng Kuankuan1,2,3, Fang Qi1,2, Dong Yuan1,2, Jin Zili1 HTM    doi:10.13251/j.issn.0254-6051.2016.01.022 Select Stability of reversed austenite in Mn-Ni steel Li Yuanmei1,2, Sun Xinjun2, Li Zhaodong2, Yong Qilong1,2, Wang Xiaojiang1,2, Zhang Ke1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.023 Select Microstructure and properties of high-carbon bainitic steel Zhu Limin1,2, Zhu Liqiang3 HTM    doi:10.13251/j.issn.0254-6051.2016.01.024 Select Microstructure heredity of 30Cr2Ni4MoV low pressure rotor steel Dang Shue，Liu Yan，Hou Wei，Zhao Zhen，Wang Zirong HTM    doi:10.13251/j.issn.0254-6051.2016.01.025 Select Development and application of heat resisting stainless steel alloyed with rare earth Sun Changqing HTM    doi:10.13251/j.issn.0254-6051.2016.01.026 Select Intermetallic compound evolution of 3104 alloy during homogenization Lu Fayun1, 2, Zhang Junli1, 2, Wang Zhao1, 2, Zhao Feng1, 2,Guo Fuan1, 2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.027 Select Effect of lanthanum content on microstructure and texture of non-oriented silicon steel after normalizing treatment Shi Caijuan1,2，Ren Huiping2，Jin Zili1，Gao Pengyue1,2，Zhang Cheng1,2，Luo Chan1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.028 Select Effect of carbon content on tribological performance of CrCN coating by multi-arc ion deposition Duan Jinhui1, 3, Liang Yin1, 3, Pei Wang1, 3, Yang Xikun2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.029 Select Effect of molybdenum on microstructure and properties of high strength low alloy steel Li Binglei1,2, Jin Zili2, Ren Huiping1,2,Zhang Lingyu1,2,Qu Wei1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.030 Select Effect of Mo on microstructure and properties of Ti microalloyed engineering machinery steel in continuously cooling process Kuang Chengsheng1, Cao Jianchun1,Zhou Xiaolong1, Yong Qilong2,Tian Ziqi1 HTM    doi:10.13251/j.issn.0254-6051.2016.01.031 Select Effect of microstructure on abrasion amount of rolling steel balls Zhang Dafu, Liu Jinyan, Chen Yi HTM    doi:10.13251/j.issn.0254-6051.2016.01.032 Select Structure and tribological behavior of TiAlN/nitride coupled coatings on Ti6Al4V Niu Ruili1，2, Li Jinlong2, Wang Yongxin2, Yao Yirong1，2, Chen Jianmin2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.033 Select Effect of plasma nitriding on wear resistance property of AISI 304L stainless steel Qin Xujuan1, Lu Junqiang2, Guo Xianglong1, Lu Weijie1 HTM    doi:10.13251/j.issn.0254-6051.2016.01.034 Select Effects of QPQ treatment on microstructure and properties of SAF3207 super duplex stainless steel Yang Caiping, Xiang Hongliang, Liu Dong HTM    doi:10.13251/j.issn.0254-6051.2016.01.035 Select Effect of annealing treatment on microstructure and mechanical properties of LZ91 Mg-Li alloy cold rolled sheet Jiang Bingchun，Tang Lianyao，Liu Fangfang，Yan Lijing，Li Bing HTM    doi:10.13251/j.issn.0254-6051.2016.01.036 Select Influence of two-phases region heat treatment on microstructure and mechanical properties of P20 steel Li Yong，Lei Wenhua，Zhou Yi HTM    doi:10.13251/j.issn.0254-6051.2016.01.037 Select Properties of carbon nano-tube/epoxy resin composite coatings on sintered NdFeB permanent magnets Liu Qijun 1, Zhang Pengjie1, Wang Minghui 1, Wang Wenfang 1, Liu Jiaqin1, Wu Yucheng 1, Huang Xiulian 2, Chen Jingwu2, Yi Xiaofei 2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.038 Select Structures and properties of magnetron co-sputtering Al-Al2O3 composite films Wang Kailiang1,2, Sun Yong1,2, Guo Zhongzheng1,2, Duan Yonghua1,2, Sun Guoqi1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.039 Select Effect of pre-magnetization frequency on performance and microstructure of laser cladding coating Liu Zheng1, Deng Jujun1, Zhu Tao1, Lin Jixing2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.040 Select Effect of surface mechanical attrition treatment under different temperature on microstructure and properties of pure copper Yang Xincheng, Wang Wei, Cai Baozhuang, Zhu Xinkun HTM    doi:10.13251/j.issn.0254-6051.2016.01.041 Select Modeling of quenching process of ultra-high strength steel components and its validation Di Huanyu1, Huang Shuke2, Shi Wei1, Li Jingmin2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.042 Select Numerical simulation and experimental verification for distortion of Ti6Al4V titanium alloy sheet during annealing Wang Wei1, Li Huaguan1, Yang Yinfei2, Shi Chunling3, Tao Jie1 HTM    doi:10.13251/j.issn.0254-6051.2016.01.043 Select Accurate determination of carbon mass transfer coefficient based on carburization of steel foil Liu Boxun, Zhang Xing, Gu Jianfeng HTM    doi:10.13251/j.issn.0254-6051.2016.01.044 Select Grain boundary character in CoCrFeMnNi high-entropy alloy after cold rolling and subsequent annealing Tang Qunhua1，Cai Xiaoyong1，Dai Pinqiang1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.045 Select Thermodynamics analysis of equilibrium solution for quaternary second-phase in Ti-Nb-N-C system for steel and its engineering application Wang Yanlin1,2, Zhou Meng1, Miao Yanping2, Pang Xiaolu1, Chen Mingwen3 HTM    doi:10.13251/j.issn.0254-6051.2016.01.046 Select Failure analysis on inner surface crack of 37Mn5 hot-rolled steel tube Cao Jingjing, Zhao Wenwu, Li Yang, Li Hezong HTM    doi:10.13251/j.issn.0254-6051.2016.01.047 Select Fracture failure analysis of 21CrMoV5.11 steel continuous casting roller Xu Shujiao1,Xu Xinhua1,Chen Guoxi 1,Qin Wei 1,ShengJiansheng1,Cheng Yang1,Deng Qilin2 HTM    doi:10.13251/j.issn.0254-6051.2016.01.048 Select Effect of Nb on microstructure and wear resistance of spray-formed M3:2 high speed steel Zhang Cheng1，Huang Jinfeng1，Wu Jian’An1，Lian Yong2，Wang Hebin1，Zhang Jishan1，Li Shukai1，Wang Hongliang1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.001 Select Effect of Nb on strength and toughness of quenched and tempered 9NiCrMo steel Li Shanshan1,2, Shen Junchang2, Zhu Xinkun1, Su Hang2 HTM    doi:10.13251/j.issn.0254-6051.2016.02.002 Select Effect of Zn content and retrogression and re-aging treatment on properties of 7075 aluminum alloy Liu Qiuping, Liu Zhiyong, Zhao Jun, Guo Weihong, Wang Mingxing, Liu Zhongxia HTM    doi:10.13251/j.issn.0254-6051.2016.02.003 Select Influence of rare earth on tensile fracture behavior of X80 pipeline steel Gong Jiahe1.2, Li Dechao1, Wang Haiyan1,2, Jia Youqing1,2, Ren Huiping1,2, Liu Zongchang1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.004 Select Effect of V and Ti on wear resistance of NM400 steel Peng Jun, Niu Liang, Guo Yong, Liu Lixia，An Shengli HTM    doi:10.13251/j.issn.0254-6051.2016.02.005 Select High temperature mechanical properties of 10Cr3Mo and N80 steels Wei Wenlan1, Han Lihong2, Wang Jianguo3, Wang Hang3, Feng Yaorong3 HTM    doi:10.13251/j.issn.0254-6051.2016.02.006 Select Effect of alloying elements on phase transformation behavior of high strength auto steel sheets Lin Zhangguo1, Xiong Ziliu1, Liu Hongqiang1, Zhang Lin2 HTM    doi:10.13251/j.issn.0254-6051.2016.02.007 Select Development of low-alloy wear-resistant steel ZG34Mn2SiV Wang Shan, Liu Jingping, Zhang Dongmei HTM    doi:10.13251/j.issn.0254-6051.2016.02.008 Select Hot ductility of nickel-based heat-resistant alloy CN617 ingot Chen Zhengzong, Liu Zhengdong, Bao Hansheng HTM    doi:10.13251/j.issn.0254-6051.2016.02.009 Select Corrosion behavior of sprayed chromium-free Zn-Al coating on sintered NdFeB Wang Minghui1, Zhang Pengjie1, Liu Qijun1, Liu Jiaqin1, Wu Yucheng1, Huang Xiulian2, Yi Xiaofei2 HTM    doi:10.13251/j.issn.0254-6051.2016.02.010 Select Friction and wear behavior of a new type of hot stamping die steel at elevated temperature Li Xinxin, Li Shuang, Wu Xiaochun, Cao Qi HTM    doi:10.13251/j.issn.0254-6051.2016.02.011 Select Effect of long term aging on microstructure and mechanical properties of heat-resistant Haynes 282 alloy Liu Qiangyong1,2, Liu Zhengdong2, Gan Guoyou1, Tian Zhongliang2, Jiang Senbao2 HTM    doi:10.13251/j.issn.0254-6051.2016.02.012 Select Microstructure and strengthening mechanism of 1000 MPa grade hot-rolled dual-phase steel Yin Cuilan HTM    doi:10.13251/j.issn.0254-6051.2016.02.013 Select Texture of 0.8%Si non-oriented silicon steel and its effect on magnetic properties Zhu Zhiyong, Wang Feng, Li Hualong HTM    doi:10.13251/j.issn.0254-6051.2016.02.014 Select Influence of aging time on precipitation behavior of 2205 duplex stainless steel Sun Qi1,2, Wang Jian1,2, He Yan1,2, Hu Yadi1,2, Li Yue1,2, Han Peide1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.02.016 Select Oxidation properties of the APS sprayed NiCr/Cr3C2-10%hBN coating Cao Yuxia1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.02.017 Select Effect of constraint thermal cycle on multi-function performance of TiNi alloy Li Jun1, Gao Weihong2, Song Wenlong1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.017 Select Friction and wear behavior of dendrite-reinforced bulk metallic glass matrix composite Zhang Teng1, Ma Shengguo2, Liu Yong1, Yang Huijun1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.018 Select WxC reinforced Ni-based composite coating in-situ synthesis by laser cladding Zhang Yanmei, Shuai Geguo, Huang Jiehuang, Liu Jing HTM    doi:10.13251/j.issn.0254-6051.2016.02.019 Select Surface carbonizing and its application on WC-Co cemented carbides Zhang Liehua1, Zhigang Zak Fang2, Xu Lin1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.020 Select Texture evolution of CGO silicon steel with Cu content during high temperature annealing process Dang Ning1, Zhang Wenkang2, Li Zhichao1, Sun Qiang1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.021 Select Effect of hot isostatic pressing on microstructure and tensile properties of Ti6242 alloy casting Chen Jianbin1, Li Jiuxiao1, Xiao Lü2, Wang Baobing2, Lü Weijie1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.022 Select Influence of coiling temperature on microstructure and mechanical properties of 51CrV4 steel under hot rolling simulation Yang Junwei1,2，Li Zhaodong2，Zhang Ke2,3，Sun Xinjun2，Yong Qilong2，Li Jian1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.023 Select Effects of quenching and tempering process on microstructure and properties of 50MnB steel Zhou Hongliang, Hu Nan, Yang Yitao HTM    doi:10.13251/j.issn.0254-6051.2016.02.024 Select Effect of high-density pulse current treatment on microstructure and properties of GCr15 steel Yang Quan1, Zang Hengbo2, Liang Baoqi1, Hao Weixun1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.025 Select Isothermal annealing process of Fe-based amorphous and nanocrystalline alloys Fang Bin1, Li Weihuo1, Li Wei2 HTM    doi:10.13251/j.issn.0254-6051.2016.02.026 Select Micro arc oxidation process of 7075 alloy for aircraft structure Li Xiangxin,?Chen Lu,?Deng Lan,?Chen Rujun HTM    doi:10.13251/j.issn.0254-6051.2016.02.027 Select Effects of solution and aging treatment on microstructure and properties of TB3 titanium alloy cold heading fastener Di Wei1, Qiao Jiaying1, Li Yongbing1, Guo Yanwei2, Zhou Yongsong1, Zhang Jishan2 HTM    doi:10.13251/j.issn.0254-6051.2016.02.028 Select Effects of pre-deformation on microstructure and mechanic properties of semi-solid 7075 alloy Li Chunxiao, Zheng Xiaoping, Zhao Dan, Tian Yaqiang, Song Jinying, Chen Liansheng HTM    doi:10.13251/j.issn.0254-6051.2016.02.029 Select Deformation behavior and establishment of constitutive equation of high strength boron steel at high temperature Hao Qingle, Han Jingtao, Song Jingjie, Lu Ruilong HTM    doi:10.13251/j.issn.0254-6051.2016.02.030 Select Hot forming process to improve strength and ductility of 95CrMo steel Zhang Bo, Li Gaosheng, Xiong Jiaze, Yu Wei HTM    doi:10.13251/j.issn.0254-6051.2016.02.031 Select Grain refinement of maraging steel cylindrical forging piece without Co Yao Chunchen1，Wang Haiyun1，Liu Xianmin2，Wang Chunxu 2，Li Yong2 HTM    doi:10.13251/j.issn.0254-6051.2016.02.032 Select Effect of high pressure-high temperature treatment on micro-mechanical properties of TC4 alloy Wang Dayong1，Zhang Lianyong1，Chen Yan2 HTM    doi:10.13251/j.issn.0254-6051.2016.02.033 Select Martempering in molten nitrate and oil quenching processes of 17CrNiMo6 steel carburized gear Zhang Luan, Wang Aixiang, Gu Min, Li Baokui, Zhu Quanyi HTM    doi:10.13251/j.issn.0254-6051.2016.02.034 Select Effect of heat treatment on microstructure and properties of hypereutectic high chromium cast iron with tungsten addition Dong Yangyang, Ouyang Haiqing, Jiang Yehua, Zhou Rong HTM    doi:10.13251/j.issn.0254-6051.2016.02.035 Select Effect of magnetic frequency on microstructure and properties of AZ91 magnesium alloy welded joint after solution and aging Qi Xiuling1,2, Liu Zhengjun2, Zhou youxin1, Wan yingqi1, Zhang yong1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.036 Select Effect of quenching-partitioning (Q-P) heat treatment on microstructure and hardness of carburized layer on 18Cr2Ni4W steel Zhao Rongda, Diao Ruijia, Jin Linlin, Liu Li, Wu Fufa, Zhang Guang’an HTM    doi:10.13251/j.issn.0254-6051.2016.02.037 Select Electroplating process of Fe-Ni-W alloy on surface of S135 drill pipe steel Zhang Defen, Li Zengzhen, Chen Xiaowen, Tan Gai, Li Renpu HTM    doi:10.13251/j.issn.0254-6051.2016.02.038 Select Effect of heat treatment on microstructure and mechanical properties of Q&P steel Li Hui1，Fang Hongjie1，Dai Yongjuan2，Ji Renlong1，Sun Jie1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.039 Select Surface modification of HT 250 gray cast iron with micro plasma arc irradiation Dai Wei，Zheng Zhizhen，Li Jianjun，Huang Qiwen HTM    doi:10.13251/j.issn.0254-6051.2016.02.040 Select Induction hardening for forming heel-end of 60AT1-U75V steel rail Zhang Dawei, Gao Fan, Lu Wuqiong, Ji Ni HTM    doi:10.13251/j.issn.0254-6051.2016.02.041 Select Effect of forging process on microstructure and mechanical properties of lager diameter TA15 titanium alloy bar Xie Li HTM    doi:10.13251/j.issn.0254-6051.2016.02.042 Select Effect of heating rate on austenitization kinetics of FV520B steel Xu Wenbo, Wei Shaopeng, Shi Wei, Wang Gang, Yiming Rong HTM    doi:10.13251/j.issn.0254-6051.2016.02.043 Select Hardenability and its prediction model of SAE8620H gear steel Cao Yanguang1, Xu Le 1, Shi Jie1, Wang Xinkang2, Wang Maoqiu1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.044 Select Influence of entire heat treatment on welding residual stress and strain of spherical tank Tang Bin, Wang Shizhong, Tao Haiyan, Wei Lianfeng, Chen Gaozhan, Wang Yu HTM    doi:10.13251/j.issn.0254-6051.2016.02.045 Select Analysis of punching-induced crack of H62 brass washer Jin Yuliang, Sun Zhenlin, Zhou Donglin, Cui Yang HTM    doi:10.13251/j.issn.0254-6051.2016.02.046 Select Failure analysis on connecting rod bolts of hydrogen compressor in a reforming device Wang Pengfei1,2,3, Liu Yan1,2,3, Wang Weiqiang1,2,3, Zhang Ming1,2,3, Qu Yanpeng1,2,3, Zhang Zhaokuan4 HTM    doi:10.13251/j.issn.0254-6051.2016.02.047 Select Failure analysis on transmission gear wheel axis in straightening process Hou Ting, Lei Xiaojuan, Jia Shu HTM    doi:10.13251/j.issn.0254-6051.2016.02.048 Select Analysis of abnormal size of bearing rings after isothermal quenching Zhang Ling, You Shaojun, Wu Yonggong, Zhang Hongxiang, Sun Xiaodong, Liu Huihe HTM    doi:10.13251/j.issn.0254-6051.2016.02.049 Select Heat treatment temperature track test for large gear Guo Rui1, Chen Jinlei2, Bai Liang3, Chen Gaohua1 HTM    doi:10.13251/j.issn.0254-6051.2016.02.050 Select Preparation and cooling characteristic of a new formula water-based quenching medium Luo Yuyuan, Jie Xiaohua, Lu Guohui, Zhang Liuyan HTM    doi:10.13251/j.issn.0254-6051.2016.02.051 Select Effects of solution temperature on microstructure and high cycle fatigue performance of 7075 aluminum alloy Liu Yilun1,2, Yi Jiuhuo1, Yang Dalian1, Li Songbai1, Tao Jie1 HTM    doi:10.13251/j.issn.0254-6051.2016.03.001 Select Influences of hot deformation on flow stress and dynamic recrystallization of ultrahigh strength stainless steel Wang Xiaohui1,2, Liu Zhenbao2, Zhou Yun1, Liang Jianxiong2, Zhang Boning2,3 HTM    doi:10.13251/j.issn.0254-6051.2016.03.002 Select Effect of secondary solid solution treatment on microstructure and mechanical properties of 1Cr16Ni4Mo2Cu2W1VN steel Hua Xiaosheng1, Yang Gang1, Wang Lu1, Wang Li1, 2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.003 Select Effect of B2/DO3 heat treatment on corrosion resistance of Fe3Al matrix alloy in H2S-CO2-Cl－ environment Wang Bin1, Feng Quan1,2 Jiang Yong3, Zhong Ke3, Yang Fei3 HTM    doi:10.13251/j.issn.0254-6051.2016.03.004 Select Effects of solution and two-step aging on microstructure and hardness of 7050 aluminum alloy Sun Yan, Ren Jie, Zhang Yanshu HTM    doi:10.13251/j.issn.0254-6051.2016.03.005 Select Effects of heat treatment on microstructure and properties of welded joint of D406A heterogeneous materials Zhang Min, Liu Juanjuan, Chu Qiaoling, Li Jihong HTM    doi:10.13251/j.issn.0254-6051.2016.03.006 Select Effects of atmospheric plasma sprays parameters on deposition efficiency of TiB2 wettable cathode coatings Peng Ruzhen1, Li Rongxing1, Yu Xiaohua1, Xie Gang2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.007 Select Heat treatment process optimization of Cr8 cutting-tool steel Huang Dingjun, Yang Yitao HTM    doi:10.13251/j.issn.0254-6051.2016.03.008 Select Effect of wet shot peening on surface appearance and fatigue property of Ti-6Al-4V alloy Yin Xiaoning1, Fu Xuesong1, Chen Guoqing1, Zhou Wenlong 1, Gai Pengtao2, Li Zhiqiang2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.009 Select Influence of tempering temperature on microstructure and properties of 60Si2CrVAT spring steel Zhu Jie1,2, Yang Chunlin3,Jiang Yun2,Xu Ximin4, Ou Meigui1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.010 Select Effect of laser power on titanium alloy surface Ni-based composite coatings Zhang Tiangang1, Sun Ronglu1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.011 Select Application and development of hot forming technology for automobile lightening Chen Hui, Jing Cainian HTM    doi:10.13251/j.issn.0254-6051.2016.03.012 Select Influence of aging time on tensile properties of Al-4Cu-0.15Zr-0.15Sc alloy Yu Jianming, Wang Liangliang, Che Xin, Chen Lijia HTM    doi:10.13251/j.issn.0254-6051.2016.03.013 Select Effect of high pressure heat treatment on microstructure of AZ91D magnesium alloy Liu Qiuxiang, Xie Shifang,Lu Lei, Lu Deping, Yang Yanling HTM    doi:10.13251/j.issn.0254-6051.2016.03.014 Select Phase transformation behavior and influence of annealing temperature on mechanical properties of Al-containing DP steel Zhao Qi1，Li Hui1，Yin Hongxia1，Dai Yongjuan2，Ji Renlong1 HTM    doi:10.13251/j.issn.0254-6051.2016.03.015 Select Effect of low and medium temperature heat-treatment on precipitation behavior of Al-Mn-Mg casting alloy Zhang Yonghao，Huang Wenrong HTM    doi:10.13251/j.issn.0254-6051.2016.03.016 Select Subcritical quenching and tempering of X56QS low-temperature and acidic service pipeline Fang Jian1, Huang Yan1, Xia Wenbing1, Chen Xianglong1, Zhou Zhengping1, Guo Haimin1, Yuan Zexi2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.017 Select Heat treatment process optimization of Al containing TRIP steel Yan Xiaoqian1, Liu Sheng2, Dong Huali1, Wang Zhenqiang1, Yang Shuai1, Liu Yile1 HTM    doi:10.13251/j.issn.0254-6051.2016.03.018 Select Quenching process control of A517Gr.Q chord for jack-up leg Xue Yuna, Guo Hui, Guo Qiaoling, Yang Zhen HTM    doi:10.13251/j.issn.0254-6051.2016.03.019 Select Strengthening of 10CrNiCu steel treated by electropulsing Zang Hengbo1, Hao Weixun2, Liang Baoqi2, Yang Quan2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.020 Select null Li Shufeng, Xie Baohai HTM    doi:10.13251/j.issn.0254-6051.2016.03.021 Select Continuous cooling transformation of supercooled austenite for ER70S-G gas protection welding wire steel Xie Fan1, Chen Weiqing1, Wang Yanwu2, Ma Degang2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.022 Select Microstructure and friction properties of WS2/TiB2 solid self-lubricant coatings Duan Jinhui1,3, Pei Wang1,3, Liang Yin 1,3, Huang Feng3, Yang Xikun2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.023 Select Microstructure and properties optimization of 600 MPa hot dipping DP steel Zhao Zhengzhi, Xi Honglei, Liang Jiangtao, Yan Yuan, Pang Qihang, Yin Hongxiang, Zhang Caihua, Zhao Yue HTM    doi:10.13251/j.issn.0254-6051.2016.03.024 Select High temperature creep behavior of a new Cr18Ni9NbTiN austenitic stainless steel Cheng Xiaonong 1, Wang Cheng1, Zhang Nan1, Li Dongsheng 1, Luo Rui 1, Gao Pei2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.025 Select Microstructure and properties of WC-Co cemented carbide irradiated by high-intensity pulsed ion beam Zhang Fenggang1, Zhu Xiaopeng2, Lei Mingkai2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.026 Select Wear resistance of Co-based coatings produced by diode laser cladding Wang Xi1, Wang Aihua1, Wu Xuhao2, Tang Huiqun3, Xiong Dahui3, Ye Bing3 HTM    doi:10.13251/j.issn.0254-6051.2016.03.027 Select Microstructure and properties of Co-based alloy laser cladding on Ni-based alloy Yang Shanglei1, You Jiaqiang2, Zhang Dongmei1, Tuo Wenhai1, Wu Zhang2, Sun Qingtao2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.028 Select Oxidation resistance of spray-formed H13 steel Cao Feiyang1，Xie Jingpei1，Wang Miaohui2，Liu Hengsan2，Zhang Zhanzhan3，Lu Siyuan4 HTM    doi:10.13251/j.issn.0254-6051.2016.03.029 Select Effect of plastic zone on corrosion fatigue crack propagation behavior of Inconel 690 alloy Fu Zhenghong1,2, Liu Jinyun1, Zha Wusheng1, Xiao Jun2, Qiu Shaoyu2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.030 Select Microstructure and properties of novel steel for perforating gun barrel Zheng Liyun1,Zhen Lingxue1, Wang Jinyong2,, Liu Jing2, Zhang Yabin2,Wang Lihui2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.031 Select Oxidation properties of the APS NiCoCrAlY/Al2O3-30%B4C composite coating Cao Yuxia1, 2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.032 Select Work hardening of Ir-W-Th iridium alloy Li Zengfeng, Ge Yuan, Li Aijun, Zhang Hanliang, Tan Ping, Liu Haiyan, Wen Jiayi HTM    doi:10.13251/j.issn.0254-6051.2016.03.033 Select Effects of Ni content on microstructure and properties of Cu precipitation strengthened steel Chen Gang1,2, Pan Tao2, Li Caiju1, Luo Xiaobing2, Chai Feng2, Su Hang2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.034 Select Effects of Sn and B on thermal stability of Fe based amorphous alloy ribbons Fu Qiang, Fu Mingxi, Wang Chao, Tao Zhiwei, Li Xumin, Chen Bin HTM    doi:10.13251/j.issn.0254-6051.2016.03.035 Select Effect of Zr and B on heat resistance of aluminium conductor and dynamic analysis Han Yu1,2, Xia Yanqiu1, Liu Dongyu1, Zhu Zhixiang2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.036 Select Effects of Al-Si eutectic on microstructure and properties of Mg-12Li alloy Zhao Zilong, Yang Huijuan, Zhou Yuyue, Zhou Diaoyu, Liang Wei HTM    doi:10.13251/j.issn.0254-6051.2016.03.037 Select Influence of Mo on microstructure and hardness of high-Cr cast iron laser cladding layer Zhang Wei1, 2, 3 HTM    doi:10.13251/j.issn.0254-6051.2016.03.038 Select Effects of Si content and cooling rate on microstructure and wear resistance of Mg2Si/Al composite Su Zhaoxing1, 2, Chen Zhilin1, Zhao Yuguang2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.039 Select Effect of Mn on microstructure and mechanical properties of 9Ni steel Zhan Guofeng1, Liu Jixiong1, 2, Liu Wenbin1 HTM    doi:10.13251/j.issn.0254-6051.2016.03.040 Select Gas circulation rate for double P-type radiant tube by CFD simulation Chen Yanmei1, Feng Junxiao1, 2, Liu Xingjie1, Wu Qiming3 HTM    doi:10.13251/j.issn.0254-6051.2016.03.041 Select Failure analysis on crack of stainless steel plug Zhu Jiao, Zhong Zhenqian, Yang Chun, Si Hong, Wang Dongmei HTM    doi:10.13251/j.issn.0254-6051.2016.03.042 Select Fracture analysis of parking brake bottom brackets Wu Shuang, Huang Ping, Tan Jiang, Luo Min HTM    doi:10.13251/j.issn.0254-6051.2016.03.043 Select Deformation control of planetary gear inner hole during carburizing and quenching Huang Jincai, Zhang Jiangshan, Lai Xianggong HTM    doi:10.13251/j.issn.0254-6051.2016.03.044 Select Failure analysis of T23/TP347H dissimilar steel welded tube joint for high temperature reheater Ren Yuebin1, Wang Wei2, Ping Shaobo3 HTM    doi:10.13251/j.issn.0254-6051.2016.03.045 Select Cause of local non-martensite extending inwards from grain boundary and its solution Xue Tingting1, Tian Tao2, Gao Zhansheng1 HTM    doi:10.13251/j.issn.0254-6051.2016.03.046 Select Fracture analysis of gear shaft and preventive measures Li Pingping, Chen Kaimin, Wu Jianhua, Xu Luoping, Wang Qun HTM    doi:10.13251/j.issn.0254-6051.2016.03.047 Select Cause analysis on median frequency quenching cracking and melting of 40Cr steel semi axle Jiao Donfeng1, Jin Linkui2 HTM    doi:10.13251/j.issn.0254-6051.2016.03.048 Select Effect of scanning velocity on microstructure and properties of laser additive manufacturing Ti2AlNb-based alloy Tang Yangjie, Zhao Xiaohao, Liu Yantao, Zhang Yongzhong, Chen Yiqiang HTM    doi:10.13251/j.issn.0254-6051.2016.04.001 Select Microstructure and hole expansion property of 780 MPa grade hot rolled ferrite/bainite dual-phase steel Gu Hairong1, Zhao Zhengzhi1,2, Pang Qihang1,2，Zhang Liang1,2, Zhao Aimin1,2, Qin Qiang3 HTM    doi:10.13251/j.issn.0254-6051.2016.04.002 Select Influence of Al or Cu content in electrode coating on microstructure and properties of X80 pipeline steel welded joint Huang Bensheng，Chen Peng，Chen Yang，Zhang Rongfu，Lu Jie HTM    doi:10.13251/j.issn.0254-6051.2016.04.003 Select Effect of quenching temperature on microstructure and properties of low-carbon Q&P steel Li Wansong, Li Zhongyi, Tian Wenhuai HTM    doi:10.13251/j.issn.0254-6051.2016.04.004 Select Effect of sintering temperature on microstructure and mechanical properties of one nickel-based superalloy Ouyang Lingyu1，Liu Fang2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.005 Select Microstructure and wear resistance of ion-nitrided titanium alloys He Ruijun, Sun Feng, Wang Lin, Tong Xiaojun HTM    doi:10.13251/j.issn.0254-6051.2016.04.006 Select Microstructure and tempering hardness of Cr-W-Mo-V high alloy medium-upper carbon steel Ma Yongqing1, Zhang Xiaojing2, Liang Yufen2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.007 Select Effect of austenizing temperature on grain size and hardness of spring steel 60Si2CrVAT Chang Kaidi，Ying Lixin，Zhou Xiaowei，Wang Ping，Zhang Wei HTM    doi:10.13251/j.issn.0254-6051.2016.04.008 Select Effect of micro alloying elements on microstructure and properties of QT600 nodular cast iron for automotive crankshaft Deng Lixia, Gao Shengxiang HTM    doi:10.13251/j.issn.0254-6051.2016.04.009 Select Effect of tempering temperature on microstructure and properties of 4Cr5MoSiV1 steel Tian Yuxin1，Lu Minghe1，Li Yue2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.010 Select Effect of heat input on microstructure and toughness of weld metal for Q890 high strength steel Cui Bing1.2,Peng Yun2,Peng Mengdu2,Song Wei2,Zhu Peixian1 HTM    doi:10.13251/j.issn.0254-6051.2016.04.011 Select CoCrCuFeMnNi high-entropy alloy coating prepared by plasma cladding on Q235 steel Lu Jinbin1, Peng Zhuqin2, Ma Mingxing2, Qi Zhendong2, Li Junkui2, He Yaxun2, Gong Zheng1 HTM    doi:10.13251/j.issn.0254-6051.2016.04.012 Select Effect of thermo-mechanical processing on grain boundary character distribution of 316L austenitic stainless steel Zhang Mingxian1, Yang Bin1,2, Wang Shenglong1, Wu Huanchun1 HTM    doi:10.13251/j.issn.0254-6051.2016.04.013 Select Magnetic change and control of 304 austenitic stainless steel plate during manufacturing process Kim Gwangsu1,2，Huang Yili1，Qiang Wenjiang1 HTM    doi:10.13251/j.issn.0254-6051.2016.04.014 Select Hydrogen induced crack-resistance properties of X80 pipeline steel Hao Hongmei1,2，Chen jian2，Wang Bing2，Jia Shujun2，Liu Qingyou2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.015 Select Effect of Nb micro alloying on microstructure and mechanical properties of high carbon steel Sun Manli1,2,Jiang Bo1,2,Chen Gang1,2, Yang Lizhu1,2，Zhong Bin1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.016 Select High temperature oxidation performance of the annealed 430 stainless steel after hot rolling Hu Pan, Yu Yinghao, Zhang Xuyu, Yang Yitao HTM    doi:10.13251/j.issn.0254-6051.2016.04.017 Select Aging precipitation phase of super austenitic stainless steel 254SMo Yang Sen1,Liu Jie1,Fan Guangwei2,Lv Xiaogen1,Wang Xin1 HTM    doi:10.13251/j.issn.0254-6051.2016.04.018 Select Continuous cooling transformation curve of 37Mn5 steel Li Yingzhen, Li Lingxia, Feng Chuanning, Liu Ke HTM    doi:10.13251/j.issn.0254-6051.2016.04.019 Select Work hardening mechanism of Hadfield steel used for railway crossing Yang Shuai HTM    doi:10.13251/j.issn.0254-6051.2016.04.020 Select Hardness and electrical conductivity of alloy wire for track circuit He Shuaichao, Tan Li HTM    doi:10.13251/j.issn.0254-6051.2016.04.021 Select Effect of alloying elements on continuous cooling transformation curve of Q460 fire-resistant steel Zhao Hongjin,Zhou Jun,Qi Liang, Yang Zhengbin, Qiu Chungen HTM    doi:10.13251/j.issn.0254-6051.2016.04.022 Select Ferrite transformation of marine pipeline steel with high properties Wang Liangsu1,2, Duan Linna2, Jia Shujun2,Liu Qingyou2, Xiang Jinzhong1 HTM    doi:10.13251/j.issn.0254-6051.2016.04.023 Select Effect of microalloying elements on high temperature oxidation of ultra low carbon steels Liu Sheng, Sun Jianzhong, Gao Hongbo, Qiu Gaosong, Liu Chunyan HTM    doi:10.13251/j.issn.0254-6051.2016.04.024 Select Mn partitioning behavior of I&P&Q process and its effect on microstructure and properties of low carbon Si-Mn steel in Song Jinying, Zhang Hongjun, Tian Yaqiang, Chen Liansheng HTM    doi:10.13251/j.issn.0254-6051.2016.04.025 Select Research status and progress of magnetic field treatment?technology for cutting tools Liu Zheng1, Zhu Tao1, Deng Jujun1, Chen Hao2,Shen Junbo1 HTM    doi:10.13251/j.issn.0254-6051.2016.04.026 Select Microstructure and hardness of P20 plastic die steel after tempering Guo Haibin, Zuo Xiurong, Zhang Xinli, Wang Yipeng, Li Jinling HTM    doi:10.13251/j.issn.0254-6051.2016.04.027 Select Heat treatment process of a novel Al-Cu-Li-Ag-Mg-Zr-Ce alloy Li Shufei1，YIN Dengfeng1,2，YU Xinxiang1 HTM    doi:10.13251/j.issn.0254-6051.2016.04.028 Select Calculation and analysis on quenching intensity of nitrate bath Ding Sheng, Ma Liang, Xu Renwei, Huang Xing, Gu Xiaoming HTM    doi:10.13251/j.issn.0254-6051.2016.04.029 Select Cold rolling process on surface of non quenched and tempered steel MFT8 for fasteners Hu Qixiang1,2，Zhao Xiuming1,2，Mao Xiangyang1,2，Wang Zhanhua1,2，Wang Zhangzhong1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.030 Select Laser remelting process of detonation gun spraying Cr3C2-NiCr coating Wang Chao1,2, Cai Hong1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.031 Select Effect of quenching and tempering process on properties of 32Cr3Mo1V steel nitriding layer Fang Shuangqiang1,2，Chen Maotao2，Zhang Jin1 HTM    doi:10.13251/j.issn.0254-6051.2016.04.032 Select Effect of cooling mediums on solution treated microstructure and mechanical properties of GH720Li alloy Yan Jian1，Tang Chao2,3，Bi Zhongnan2,3，Qu Jinglong2,3，Du Jinhui2,3 HTM    doi:10.13251/j.issn.0254-6051.2016.04.033 Select Precise gas carburizing and isothermal quenching process of 18Cr2Ni4WA steel bushes Li Feng1，Wang Xinyu2，Li Shijian2，Han Peipei2，Yu Hao2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.034 Select Influence of austentizing temperature on precipitated phase for Nb bearing steel Fu Yongtao，Guan Jisheng，Zhou Qianxue，Chen Wei HTM    doi:10.13251/j.issn.0254-6051.2016.04.035 Select Effects of high temperature pretreatment and austempering process on mechanical properties of CADI Chen Chuansheng1, Liu Jiansheng2,3, Zu Fangqiu2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.036 Select Effect of current density on siliconizing of niobium in molten salt Wang Yanli, Yang Haili, Wu Yekang, Xu Hong, Wang Xinyue, Feng Ce HTM    doi:10.13251/j.issn.0254-6051.2016.04.037 Select Laser surface modification of AZ91 alloy for car engine Hu Xinlin1, Qian Ming2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.038 Select High strength and toughness process of 20Cr2Ni4A steel Meng Xiangshun, Gao Quande, Ye Yujuan, Wang Xuexi, Wang Dengke, Li Haibin, Shi Jianma HTM    doi:10.13251/j.issn.0254-6051.2016.04.039 Select Influence of induction coil parameters on temperature field of steel plate and study of choosing of coil sizes Wang Yuanwu1,2, Liu Cungen1,2, Wang Xuefeng1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.040 Select Mathematical model of austenite grain growth behavior of A315 steel Li Jiankai1, 2, Li Yong2, Wang Chunxu2, Yuan Shouqian1 HTM    doi:10.13251/j.issn.0254-6051.2016.04.041 Select Simulation of distortion and controlling of TC4 alloy frame during annealing process Li Shijian, Quan Chunyi, Jiao Qingyang, Qu Feng HTM    doi:10.13251/j.issn.0254-6051.2016.04.042 Select Numerical simulation of continuous induction quenching process of 45 steel plain shafts Chen Jun1, Zhang Genyuan1, Zhao Zhengyang2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.043 Select Application of EBSD technology on DWTT performance research of thickness specification pipeline steels Jia Shujun, Liu Qingyou, Li Ba HTM    doi:10.13251/j.issn.0254-6051.2016.04.044 Select Comparison of grain size measuring methods for SWRH72A tire cord steel Xiao Xuan, Chen Min HTM    doi:10.13251/j.issn.0254-6051.2016.04.045 Select Analysis on surface black spots defects of thick gauge galvanized sheet Zhang Jianqiang1, 2, Chen Changfeng1, Zheng Yanjun1, Li Yan2, Wang Yongwei2, Miao Chengliang2, Huang Xueqi2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.046 Select Effect of high temperature deformation on surface quality of cold-rolled steel sheets in CAL Li Tengfei, Tang Xi, Chen Aihua, Li Hualong HTM    doi:10.13251/j.issn.0254-6051.2016.04.047 Select Fracture analysis of stud bolt Sun Guofeng1，Wang Dawei2 HTM    doi:10.13251/j.issn.0254-6051.2016.04.048 Select Transformation rule of microstructure and carbides of H13 steel during tempering Zhang Cheng1，Huang Jinfeng2，Dou Mengyang1，Lian Yong2，Wang Junfeng1，Zhang Zunjun1，Zhou Qiming1，Zhang Jishan1 HTM    doi:10.13251/j.issn.0254-6051.2016.05.001 Select VC precipitation and retained austenite transformation of high-vanadium high-speed steel during tempering Xu Liujie1,3, Li Zhou2, Wei Shizhong1 HTM    doi:10.13251/j.issn.0254-6051.2016.05.002 Select Comparison of tempering properties of two novel Mo-W hot-work tool steels Cao Qi, Wu Xiaochun, Li Shuang, Li Xinxin, He Xijuan HTM    doi:10.13251/j.issn.0254-6051.2016.05.003 Select Hardness enhancement mechanism of rare earth nitrided layer on alloy steels Gu Jihai1, Lv Juncheng2, Liu Chengyou2, Zhang Anning1, Lin Jing1, Zhang Guoliang2, Wang Xinliang2 HTM    doi:10.13251/j.issn.0254-6051.2016.05.004 Select Oxidation and interface reaction of atmospheric plasma-sprayed CuAl/hBN coatings on titanium alloy Cao Yuxia1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.05.005 Select Stabilities of microstructure and mechanical properties of alloy 617B Guo Yan, Li Jutao，Yang Qiangbin, Li Taijiang, Hou Shufang, Wang Bohan HTM    doi:10.13251/j.issn.0254-6051.2016.05.006 Select Thermal Stability Behavior of DM, H13 and 3Cr2W8V Steel Cai Yuanyuan1，Zuo Pengpeng1，Zhu Chunyan1，Min Na2，Wu Xiaochun1 HTM    doi:10.13251/j.issn.0254-6051.2016.05.007 Select Effect of annealing temperatures on microstructure and mechanical properties of TWIP steel Jiang Yinghua，Kuang Shuang，Liu Huasai HTM    doi:10.13251/j.issn.0254-6051.2016.05.008 Select Effect of iron on grain refinement of carbon inoculation in Mg-9Al alloy Zhao Guorong1, Wang Chunjian2 HTM    doi:10.13251/j.issn.0254-6051.2016.05.009 Select Microstructure and properties of melting welded joint of Ti/steel composite plates Li Jihong, Xie Weiwei, Yang Jun, Liu Haizhang, Zhang Min HTM    doi:10.13251/j.issn.0254-6051.2016.05.010 Select Properties of micro and nano structured WC-10Co4Cr coatings sprayed by HVOF Chen Xiaoming1,2, Zhou Xialiang 1,2, Wu Yanming1,2, Wang Lirong1, Zhao Jian2, Mao Pengzhan1, Fu Li2, Ma Honghai3, Zhao Peng3 HTM    doi:10.13251/j.issn.0254-6051.2016.05.011 Select Mechanical properties of N80 steel oil tube after QPQ treatment Bao Wenqiang, Luo Defu，Zhang Lei HTM    doi:10.13251/j.issn.0254-6051.2016.05.012 Select Effect of Al content on mechanical properties and fracture morphology of E grade stee Gong Qingfeng, Wang Liping, Feng Yicheng, Wang Changliang, Jiang Wenyong HTM    doi:10.13251/j.issn.0254-6051.2016.05.013 Select Effects of molybdenum on microstructure and abrasion resistance of open arc hardfacing alloys with high hardness Gong Jianxun, Liu Jiangqing, Li Yi HTM    doi:10.13251/j.issn.0254-6051.2016.05.014 Select Effect of Si content on microstructure and properties of 30Cr13 stainless steel Mao Honghuan, Hu Pan, Yang Yitao HTM    doi:10.13251/j.issn.0254-6051.2016.05. 015 Select Effect of Sm on microstructure and mechanical properties of as-cast Mg-0.4Zn-0.8Zr alloys Yu Minghai，Guo Erjun，Feng Yicheng，Wang Liping, Wang Changliang HTM    doi:10.13251/j.issn.0254-6051.2016.05. 016 Select Static recrystallization behaviors of C-Mn-Al-P TRIP steel with La addition Ding Wei1,2, Du Jingchao1, Guo Jinglong1, Li Yan2 HTM    doi:10.13251/j.issn.0254-6051.2016.05.017 Select Effects of TiB2 particle on microstructure and hydrogen content of TiB2/Al composite Liu Xin, Qu Min, Cui Yan, Liu Fengbin HTM    doi:10.13251/j.issn.0254-6051.2016.05.018 Select Effect of austempering on microstructure and properties of high chromium cast iron Zhong Yunze, Shao Honghong, Ma Yuanyuan, Li Chenglong HTM    doi:10.13251/j.issn.0254-6051.2016.05.019 Select Microstructure and mechanical properties of low carbon Si-Mn bainitic steel after I&Q & PB processing Tian Yaqiang, Gao Tianzuo, Song Jinying, Zheng Xiaoping,Wei Yingli, Chen Liansheng HTM    doi:10.13251/j.issn.0254-6051.2016.05.020 Select Effect of SiCp pretreatment on wear-resistance of Al-Si based composites Yang Jianlin，Long Lüwei，Li Yongjing，Wang Junjie，Dai Changyi，Zhang Yingying HTM    doi:10.13251/j.issn.0254-6051.2016.05.021 Select Influence of sintering process on microstructure of nanosilver paste Chen Gang1, Wang Yizhe1, Mei Yunhui2, Chen Xu1 HTM    doi:10.13251/j.issn.0254-6051.2016.05.022 Select Grain growth and its effect on recrystallized texture of cold rolled 430 stainless steel strip during annealing process Zhang Xiong1, Wen Zhi2 HTM    doi:10.13251/j.issn.0254-6051.2016.05.023 Select Aging mechanism of Al-5%Cu alloy under pulse magnetic field Zhao Zuofu, Liu Liang, Qi Jingang, Wang Jianzhong HTM    doi:10.13251/j.issn.0254-6051.2016.05.024 Select Effect of annealing process on microstructure and properties of cold rolled 4J36 invar alloy sheet Li Dahang1, Wang Baiyu1, Zhao Gang1, Liu Xuan1, Zhou Hongqing1, Zhu Xiaolei1, Li Bo2, Wang Xiaoqiang2 HTM    doi:10.13251/j.issn.0254-6051.2016.05.025 Select Effects of final cooling temperature and holding time on microstructure and hardness of U75V steel Wang Lixin1，Zhi Jianguo2，Li Zhili2，Peng Jun1 HTM    doi:10.13251/j.issn.0254-6051.2016.05.026 Select Ageing characteristics of high manganese steel used for railway crossing Yang Shuai HTM    doi:10.13251/j.issn.0254-6051.2016.05.027 Select Ion nitriding of maraging stainless steel He Ruijun, Sun Feng, Wang Lin, Tong Xiaojun HTM    doi:10.13251/j.issn.0254-6051.2016.05. 028 Select Effect of soaking temperature on microstructure and properties of 590 MPa hot-dip galvanized dual phase steel Kuang Chunfu, Zheng Zhiwang, Wang Meng HTM    doi:10.13251/j.issn.0254-6051.2016.05.029 Select Process parameter control?of water quenching and oil cooling for MC3 steel cold work roller Guo Wei1,2，Chu Zuoming1，Jin Kang1，Wang Xiaohui1，Chen Dong1，Zhou Yingli1 HTM    doi:10.13251/j.issn.0254-6051.2016.05.030 Select Effect of heat treatment on fatigue properties of titanium alloy for medical hip joint Zhou Xian, Yang Gang, Zhou Lin, Sun Yanhua, Yue Youcheng HTM    doi:10.13251/j.issn.0254-6051.2016.05.031 Select Effect of electric pulse treatment on microstructure and properties of boronized layer on Cr12MoV steel Zhou Ying1, Qi Jin’gang1, Zhao Zuofu1,2, Zhou Xiang1, Wang Jianzhong1 HTM    doi:10.13251/j.issn.0254-6051.2016.05.032 Select Effect of magnetic frequency on microstructure and properties of AZ91 magnesium alloy welded joint after direct aging Qi Xiuling1,2, Sun Linlin1, Zhang yong1 HTM    doi:10.13251/j.issn.0254-6051.2016.05.033 Select Effect of heat treatment on microstructure and properties of 45Cr14Ni14W2Mo steel Bao Wenquan, Liu Guijiang, Yang Jianhua, Guo Qiang HTM    doi:10.13251/j.issn.0254-6051.2016.05.034 Select Microstructure and corrosion resistance of hardened layer on 40Cr steel by gas oxy-nitrocarburization Wu Mian, Pan Lin, Zhang Liangjie, Li Peng, Yang Minhong, Ma Fei, Chen Yaping HTM    doi:10.13251/j.issn.0254-6051.2016.05.035 Select Improvement of quenching process of 16CrNi4MoA steel Xu Dejia, Yu Miao, Guo Jianning HTM    doi:10.13251/j.issn.0254-6051.2016.05.036 Select Simulation analysis of layer by layer quenching process of a heavy truck front axle Zhu Zhenhua1,2, Qing Xunpeng1,2, Gao Kai1,2, Chen Xuliang1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.05. 037 Select Determination and analysis of heat transfer coefficient of high-strength steel sheet during spray quenching Liu Zidan, Li Xianjun, Wang Zhanjun, Wu Xiaolin, Zhang Xiaoyu, Wang Xiaoxu HTM    doi:10.13251/j.issn.0254-6051.2016.05. 038 Select Numerical simulation on heat treatment process optimization of large solid engine shell Hu Chunhai1, Wang Changjian1, Qin Zhanling1, Zhang Lixu1, Zhang Min2, Chu Qiaoling2, Chen Yinni2, Liu Juanjuan2 HTM    doi:10.13251/j.issn.0254-6051.2016.05.039 Select High temperature endurance?of?a new type bolt steel 20CrNi4Mo Zhao Ziyi1, Li Peiyao2 HTM    doi:10.13251/j.issn.0254-6051.2016.05.040 Select Corrosion behavior of X80 pipeline steel in simulated soil solution Liu Yingyi, Zhou Guoshi, He Jun, Li Xinkai, Zhang Hongmei HTM    doi:10.13251/j.issn.0254-6051.2016.05.041 Select Fracture failure analysis of 23CrNi3Mo steel shank adapter Yan Yongming, Sun Ting HTM    doi:10.13251/j.issn.0254-6051.2016.05.042 Select Fracture failure analysis of telescopic cylinder oil pipe assembly Wang Wenyin1, Zhao Shutao1, Liu Qiwen2 HTM    doi:10.13251/j.issn.0254-6051.2016.05.043 Select Fracture failure analysis of hydraulic cylinder for shipping crane Li Qunying, Zheng Xuerong, Guo Qianying HTM    doi:10.13251/j.issn.0254-6051.2016.05.044 Select Formation reason and elimination of banded structure in Q345R steel hot formed head Li Yuhong HTM    doi:10.13251/j.issn.0254-6051.2016.05.045 Select Failure analysis of transmission middle shaft Lei Xiaojuan, Hou Ting HTM    doi:10.13251/j.issn.0254-6051.2016.05.046 Select Creep behavior of Inconel 600 alloy used for nuclear power Han Ningning，Gu Jianfeng HTM    doi:10.13251/j.issn.0254-6051.2016.06.001 Select Austenite grain growth behavior of SA508-4N steel for nuclear pressure vessel He Xikou1, Liu Zhengdong1, Yang Zhiqiang1, Wang Xiaobin2, Fang Caishun2 HTM    doi:10.13251/j.issn.0254-6051.2016.06.002 Select Precipitated phase in Cu-Ni-Al alloy during near equilibrium solidification Tao Shiping1, Xie Hui1, Jia Lei2 HTM    doi:10.13251/j.issn.0254-6051.2016.06.003 Select Research and development of ultra-high strength and hot-rolled steel with high hole expansion ratio Han Peng1,Dong Yi2, Li Weijuan1, Shi Xiaoguang2, Liu Rendong2, Yang Zhen1, Ma Pengyu1, Feng Hao1 HTM    doi:10.13251/j.issn.0254-6051.2016.06.004 Select Effects of Nb and Ni on high temperature plasticity of precipitation strengthened high strength steel Zhao Peilin HTM    doi:10.13251/j.issn.0254-6051.2016.06.005 Select Static softening behavior of ultra-high strength DP980 steel Xu Bin1, Li Shouhua2, Mi Zhenli3 HTM    doi:10.13251/j.issn.0254-6051.2016.06.006 Select Strain aging behavior of X90 pipeline steel Zheng Shengbin1, Xiong Xiangjiang2, Li Zhongping2, Shi Shuhua2, Fan Ming2, Chen Qiming2, Leng Peng3, Liu Shize4 HTM    doi:10.13251/j.issn.0254-6051.2016.06.007 Select Effects of cold rolling reduction rate and flat extension rate on microstructure and properties of annealed low carbon steel sheet Tang Xi, Li Hualong HTM    doi:10.13251/j.issn.0254-6051.2016.06.008 Select Influence of continuous annealing temperature on mechanical properties and texture of IF steel Chen Aihua, Li Hualong, Li Tengfei HTM    doi:10.13251/j.issn.0254-6051.2016.06.009 Select Effects of post-weld heat treatment on microstructure and properties of 800 MPa hydropower steels Fan Yanqiu, Ma Changwen, Sui Helong, Zou Yang, Zhao Nan HTM    doi:10.13251/j.issn.0254-6051.2016.06.010 Select Effects of deformation temperature on strain-stress curve and microstructure of IF steel Yang Jichun1, Liu Xiangjun1, Lü Yanhong2, He Yaoyu1, Li Kun1, Yang Changqiao1 HTM    doi:10.13251/j.issn.0254-6051.2016.06.011 Select Hot deformation behavior and microstructure of Mg-2.5Nd-1.0Zn-0.5Zr alloy Guo Ruihua1,2,Liu Yuqian2, Zhang Jieyu1,Zhou Guozhi1,Wang Linmin3,Fan Yi 2 HTM    doi:10.13251/j.issn.0254-6051.2016.06.012 Select Residual stress porfile and thermal-relaxtion of shot-peened titanium alloy Chen Caihong1, Wang Xin2,Zhou Jian1, Yin Liqing1 HTM    doi:10.13251/j.issn.0254-6051.2016.06.013 Select Effects of annealing time and rare earth element on microstructure and texture of high-strength IF steel Liu Yuyan, Xu Guofang, Jin Zili, Chen Lin, Luo Xinqi, Zhang Zhigang HTM    doi:10.13251/j.issn.0254-6051.2016.06.014 Select Microstructure evolution of Ni3Al nanocrystal during low temperature annealing Ren Jiangwei, Li Dong HTM    doi:10.13251/j.issn.0254-6051.2016.06.015 Select Influence of homogenized?annealing on microstructure and hardness of Mg-xAl-Zn alloy Han Xi1, Yang Jungang2, Rong Huan1, Zhou Chunsheng1, Liu Yanfeng1 HTM    doi:10.13251/j.issn.0254-6051.2016.06.016 Select Influence of heat treatment on microstructure and mechanical properties of 35CrMo steel Su Lei1, Liu Haihong2 HTM    doi:10.13251/j.issn.0254-6051.2016.06.017 Select ?Wear?resistance of NiCr/Cr3C2-20%WS2 coating on titanium alloy by laser cladding Wu Shaohua1, Shi Gaolian1, Lu Xiaolong2, Liu Xiubo2 HTM    doi:10.13251/j.issn.0254-6051.2016.06.018 Select Microstructure and properties of low cost TC4 titanium alloy sheet Feng Qiuyuan1, 2, Zhang Lei2, Pang Hong2, Zhang Pinghui1, 2, Tong Xuewen1, 2, Wang Dingchun1, 2, Gao Qi1, 2 HTM    doi:10.13251/j.issn.0254-6051.2016.06.019 Select Edge effect of DC glow?discharge plasma Feng Jun1,2, Chen Meiyan1, Jin Fanya1, Dan Min1, Nie Junwei1, Shen Liru1, Tong Honghui1, Lai Xinchun3 HTM    doi:10.13251/j.issn.0254-6051.2016.06.020 Select Microstructure and hardness of Cr13 martensite stainless steel after heat treatment Ji Xianbin, Li Jucang, Wang Jianze, Qian Zhangxin HTM    doi:10.13251/j.issn.0254-6051.2016.06.021 Select Influence of finish cooling temperature on microstructure and mechanical properties of high strength steel with low yield ratio Tong Mingwei1, 2, Yuan Zexi1, Zhang Kaiguang2, Fan Wei2 HTM    doi:10.13251/j.issn.0254-6051.2016.06.022 Select Effect of heat treatment on microstructure and mechanical properties of 9Ni steel welded joints Zhang Min, Zhang Ming, Li Jihong HTM    doi:10.13251/j.issn.0254-6051.2016.06.023 Select Effect of annealing on microstructure and mechanical properties of cold rolled low carbon steel Li Xiaolin, Li Hongbin, Lin Zhe, Xu Shucheng HTM    doi:10.13251/j.issn.0254-6051.2016.06.024 Select Cryogenic treatment process of GCr15 steel ball valve Liu Chengjie，Tan Jun，Liu Peng，Chen Yi，Li Wei HTM    doi:10.13251/j.issn.0254-6051.2016.06.025 Select Effects of quenching water temperature and tempering temperature on microstructure and hardness of 60Si2CrVA steel Zhang Chunlei, Wang Baoyu, Zhou Jing, Huo Yuanming, Huang He HTM    doi:10.13251/j.issn.0254-6051.2016.06.026 Select Effect of solid solution on microstructure and grain size of as-extruded WE43 magnesium alloy Wei Xutong1, Cui Junjun1, 2, Yu Lijun1 HTM    doi:10.13251/j.issn.0254-6051.2016.06.027 Select Effect of annealing temperature on microstructure and adhesion strength of Ru films deposited by DC magnetron sputtering Xue Yaping1,3, Ju Hongbo1, Chen Min2, Guo Liping2, Yu Lihua1, Xu Junhua1 HTM    doi:10.13251/j.issn.0254-6051.2016.06.028 Select Influence of vacuum annealing on microstructure and properties of plasma sprayed Ag/SnO2 coating Fu Chong, Liu Ning, Zhang Yuhui, Qiu Runhong, Wang Junbo, Yang Minge HTM    doi:10.13251/j.issn.0254-6051.2016.06.029 Select Effects of heat treatment processes on microstructure and mechanical properties of low-carbon martensitic steel Gao Hanfeng1, 2, Li Xiaoyuan2 HTM    doi:10.13251/j.issn.0254-6051.2016.06.030 Select Heat treatment of 18Cr2Ni4WA steel driven gear shaft Zhang Changying HTM    doi:10.13251/j.issn.0254-6051.2016.06.031 Select Effects of modification and heat treatment on microstructure and mechanical properties of Al-Si alloy Zhao Erli1,2, Xu Zhicheng2 HTM    doi:10.13251/j.issn.0254-6051.2016.06.032 Select Optimization of quenching parameters for automobile ultra-high strength steel based on response surface Yuan Jian HTM    doi:10.13251/j.issn.0254-6051.2016.06.033 Select Effect of heat treatment on microstructure and properties of powder metallurgy high speed steel Li Xinyang1,2, Che Hongyan1,2, Lin Tongwei1,2, Tang Liangliang1,2, Chen Wei1,2, Wang Xueyuan1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.06.034 Select Composite strengthening heat treatment process of iron-nickel based 3YC61 alloy Huang Guoping1, 2, 3, Tang Rui1, 2, Liu Haiding1, 2, 3, Wang Dongzhe1, 2, 3, Li Yongyou1, 2, 3 HTM    doi:10.13251/j.issn.0254-6051.2016.06.035 Select Effect of vacuum heat treatment on surface oxidization of single crystal superalloy DD6 Zhou Ge, Zhang Shanqing, Mo Weihong, Kong Lingli HTM    doi:10.13251/j.issn.0254-6051.2016.06.036 Select Effects of continuous annealing temperature on mechanical properties of hot-dip galvanized 550 MPa low alloy steel Xie Chunqian, Han Yun, Liu Huasai, Kuang Shuang, Teng Huaxiang HTM    doi:10.13251/j.issn.0254-6051.2016.06.037 Select Double frequency quenching process for conical roller Zhang Wei, Xu Haiying, Liu Peipei, Shen Weifang HTM    doi:10.13251/j.issn.0254-6051.2016.06.038 Select Quality control of heat treatment process Wang Liangbing1, Wu Wangping2, Xu Fei3, Ma Tianbiao1, Zhao Shiming1 HTM    doi:10.13251/j.issn.0254-6051.2016.06.039 Select Comparison of etchant used for as-cast Mg-Nd-Zn-Zr magnesium alloy Wang Peng1, Long Siyuan1,2, Yang Chengzhi1, Jiang Hao1 HTM    doi:10.13251/j.issn.0254-6051.2016.06.040 Select Crack analysis of strake-wing during heat treatment Li Yahong, Zheng Shuli, Liu Yang, Sheng Chunxiang, Zheng Li HTM    doi:10.13251/j.issn.0254-6051.2016.06.041 Select Failure analysis on fatigue crack of bimetal strip saw blade Zhou Yongkun1, Zhao Xianrui2, Xu Hui2 HTM    doi:10.13251/j.issn.0254-6051.2016.06.042 Select Analysis?on?welding?crack of 12Cr1MoV steel water wall and countermeasures Zhang Sumin1, Tang Chunpo1, Wang Ping1, Sun Zhiqiang2, Zhou Long1, Zhang Yu3, Jiang Deyong1, Lü Yishi2, Chen Zhongbing2 HTM    doi:10.13251/j.issn.0254-6051.2016.06.043 Select Surface defects analysis of guide roller and counter measures Li Pingping，Chen Kaimin，Wu Jianhua，Xu Luoping, Liang huilei HTM    doi:10.13251/j.issn.0254-6051.2016.06.044 Select Optimization design of structure of bottom spray quenching tank Li Xin, Zhang Hai, Zheng Guo, Zhang Xiaodong HTM    doi:10.13251/j.issn.0254-6051.2016.06.045 Select Microstructure evolution during heat treatment of Al rich Co-Al-W base superalloy Chen Yanhui1, Long Haibo1, Mao Shengcheng1, Xue Fei2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.001 Select Superconductivity of FeSe1-x alloy synthesized by mechanical alloying and following annealing Yang Jianlin，Song Wenwei，Li Chuang，Zhu Jiaying，Wang Siqi HTM    doi:10.13251/j.issn.0254-6051.2016.07.002 Select Effect of initial microstructure before rolling on microstructure evolution of bidirectional warm rolled medium carbon steel Wang Mingming, Ning Jiangli, Feng Yunli, Zheng Shenbai, Li Jie HTM    doi:10.13251/j.issn.0254-6051.2016.07.003 Select Flow behavior and hot processing maps of Ti-10V-2Fe-3Al alloy Wang Xiangjie HTM    doi:10.13251/j.issn.0254-6051.2016.07.004 Select Effect of Al content on microstructure and high temperature tensile properties of high W cast superalloy Feng Wei1,Zhou Tongjin12, Zhao Huibin1, Yang Fei1,Sun Chuanqi1,Meng Yu1,Tang Hui1,Zhang Huaxia1 HTM    doi:10.13251/j.issn.0254-6051.2016.07.005 Select Influence of direct extrusion and torsional deformation on microstructure and properties of Mg alloys Lu Liwei1,2, Chen Shengquan1, Liu Chuming2,Zhang Chenchen1,Zhao Jun1, Yin Zhenru1, Liu Longfei1 HTM    doi:10.13251/j.issn.0254-6051.2016.07.006 Select Influence of strain aging?on microstructure and properties of?X90?cold bending pipe Wu Kang，Hu Qiang，Yang Mei，Huang Shaobo，Zhang Junlei，Zhou Zhimin HTM    doi:10.13251/j.issn.0254-6051.2016.07.007 Select Effect of centrifugal pressure on microstructure and mechanical properties of AZ31 magnesium alloy Zou Longlong,Ma Youping,Yang Lei,Li Wei，Jia Shaobo,Zhao Lei HTM    doi:10.13251/j.issn.0254-6051.2016.07.008 Select Effect of disassembling temperature on microstructure and properties of 1Mn18Cr18N stainless steel for retaining ring application Wu Shuanghui1, Wang Huiting1, Wu Lina2, Huo Yan1, Ding Junfeng1, Wen Daowei1 HTM    doi:10.13251/j.issn.0254-6051.2016.07.009 Select Microstructure and hardness of metastable nitrided 38CrMoAl steel Wang Chenchen1,2, Xu Wenhua1,2, Xiao Guiyong1,2, Lu Yupeng 1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.010 Select Texture of 50W470 silicon steel during reversing cold rolling process Peng Kai1,2，Xiang Li2，Qiu Shengtao2，Zhang Yinghui1 HTM    doi:10.13251/j.issn.0254-6051.2016.07.011 Select Effect of friction stir processing on microstructure and properties of WE43 alloy Chen Jianli 1,2, Zeng Dechang 3 HTM    doi:10.13251/j.issn.0254-6051.2016.07.012 Select Effect of welded speed on friction stir welded joint of Al/Cu plates Qiao Ke1, Wang Wen1,Wu Nan2,Li Tianqi1,Wang Kuaishe1 HTM    doi:10.13251/j.issn.0254-6051.2016.07.013 Select Effect of 3 GPa high pressure treatment on phase transformation dynamics of ? to α in TC6 titanium alloy Zhao Wenlei, Ji Li, Sun Huimin, Zhao Lan, Zhao Yuehong HTM    doi:10.13251/j.issn.0254-6051.2016.07.014 Select Effect of trace Ce on microstructure and mechanical properties of Al-Cu-Li alloy Wang Hua, Zhao Qi, Yin Hongxia HTM    doi:10.13251/j.issn.0254-6051.2016.07.015 Select Influence of surface treatment on corrosion resistance of die steel Cao Hanxue1,2, Tang Haoxing1,2, Jia Congbo1,2, Gao Yongshuai1,2, Lei Jiale3 HTM    doi:10.13251/j.issn.0254-6051.2016.07.016 Select Effect of tempering on corrosion resistance of M50 steel remelted by high current pulsed electron beam Jia Tiantian1，Xu Fangjun1,2，Zhang Zhongzhong1，Deng Kunkun1，Nie Kaibo1 HTM    doi:10.13251/j.issn.0254-6051.2016.07.017 Select Effects of constant current and voltage on structure and properties of MAO films on TC4 alloy surface Ni Erxin1,2,Yan Jikang1,2, Wu Yunfeng1, Sun Yanhua1, Yang Gang1 HTM    doi:10.13251/j.issn.0254-6051.2016.07.018 Select Preparation of Si-modified aluminide coating by CVD process Liu Lei1，Yang Fu1，Wu Yong1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.019 Select Microstructure?formation?and?thermodynamic?analysis?of?Cr-Si?co-deposition coating?on?pure?Mo Li Mei, Tian Xiaodong, Wang Tiantian, Li Baozhong HTM    doi:10.13251/j.issn.0254-6051.2016.07.020 Select Effect of sputtering power on properties of ZnO:Al films on stainless steel substrates Yang Huidong,Zhang Cuiyuan，Wang Heshen,Li Shan,Li Xinru,Wu Lang HTM    doi:10.13251/j.issn.0254-6051.2016.07.021 Select Heat treatment process of H13 die steel for precision forged?gear Guan Changjun 1，Han Ying 2，Xiu Wencui 2，Wang Qi 2，Wu Hua 2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.022 Select Effect of austempering process parameters on microstructure and wear resistance of GCr15 steel spinning rings Kong Yonghua,Li Sibei,Zhou Jianglong,Zhu Shigeng HTM    doi:10.13251/j.issn.0254-6051.2016.07.023 Select Effect of protective atmosphere on composition and structure of oxide scale on annealed ER80S-1CM welding electrode Guo Huiying, Zhou Yun, Zhang Yu HTM    doi:10.13251/j.issn.0254-6051.2016.07.024 Select Grain growth kinetics of 1235 aluminum alloy during homogenizing annealing Tan Guoyin1,Yue Youcheng1,Cao Ruike1,Yang Gang1,Ma Ning2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.025 Select Cu partitioning behavior of Fe-C-Mn-Cu steel by I&Q process Chen Liansheng, Xu Jinghui, Tian Yaqiang, Zheng Xiaoping, Song Jinying, Mi Zhenpeng HTM    doi:10.13251/j.issn.0254-6051.2016.07.026 Select Effect of heat treatment on mechanical properties and wear resistance of Q345 aluminized steel Huang Yao1, Wang Xuming1, Niu Haijun1, Lin Deyuan2,Zhao Jinfei3, Chen Yunxiang2, Liu Weining4 HTM    doi:10.13251/j.issn.0254-6051.2016.07.027 Select Influence of quenching process on size of wear-resistant plate Peng Bin HTM    doi:10.13251/j.issn.0254-6051.2016.07.028 Select Effect of solution treatment on microstructure and properties of high temperature bearing steel G80T Han Jiao1，2,Li Li1,Yu Feng2,Xu Da2,Cao Wenquan2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.029 Select Effect of normalizing holding time on microstructure and properties of P460NH steel plate Hu Haiyang,Hu Xinming,Wang Chu,Sun Diandong,Li Guanglong,Ouyang Xin HTM    doi:10.13251/j.issn.0254-6051.2016.07.030 Select Effect of heat treatment on microstructure and properties of EH36 ship building steel Lei Caihong1,Cao Jun2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.031 Select Effect of cooling methods on microstructure of 23CrNi3Mo carburized steel Yan Yongming HTM    doi:10.13251/j.issn.0254-6051.2016.07.032 Select Heat treatment of 30NiCrMoV12 steel axle Xue Zhenfeng，Zhao Xinglong，Wang Yanfang HTM    doi:10.13251/j.issn.0254-6051.2016.07.033 Select Effect of cold treatment and cryogenic treatment on microstructure and mechanical properties of G20Cr2Ni4A steel Song Huahua HTM    doi:10.13251/j.issn.0254-6051.2016.07.034 Select Analysis on influencing factors of spraying quenching rate Jiang Peng, Wang Qian HTM    doi:10.13251/j.issn.0254-6051.2016.07.035 Select Effect of PAG quenchant temperature on mechanical properties of 60Si2CrVAT spring steel Zhang Zaiyu1,2,3， Liang Yilong1,2，Lei Lei1,2，Jiang Yun1,2，Yang Ming1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.036 Select Simulation of coupling of electromagnetic and thermal of intermediate frequency induction heating of pipeline Yi Xiaokai1, Li Liangyu1, Yue Jianfeng1, Liu Haihua1, Liu Xiaohui2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.037 Select Inhomogeneity of properties and defects?after die pressing of 316L stainless steel wire for glasses frame Wang Binning1, Song Renbo1, Tan Yao1, Hu Jianxiang2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.038 Select Measurement of recrystallization temperature and analysis of microstructure of cold rolled IF steel Ding Zhilong1, Si Songhua2, Yuan Xiaomin2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.039 Select Analysis and control for bright spot defect on surface of hot dip galvanized sheet Yang Wei, Li Tingting, Li Tengfei, Li Hualong HTM    doi:10.13251/j.issn.0254-6051.2016.07.040 Select Fracture mechanism of Q460D structural steel under different stress state Lu Ming1，Yang Jun1，Liao Fangfang2，Li Wenchao2，Li Guangsheng3，Ma Kuan1，Cui Mao1 HTM    doi:10.13251/j.issn.0254-6051.2016.07.041 Select Effect of yttrium oxide nanoparticles on corrosion resistance of chromium-free dacromet coating Qiao Jingfei1, Zhang Mingming1, Zhang Xiaolin2, Zhang Kebing1, Zhang Shenglin1 HTM    doi:10.13251/j.issn.0254-6051.2016.07.042 Select Oxidation analysis of carburized and hardened 18CrNiMo7-6 gear shaft Kong Dequn1,2, Liu Qingsuo1, Ren Zheng2, Liu Zhihao3 HTM    doi:10.13251/j.issn.0254-6051.2016.07.043 Select Fracture failure analysis of grade HL sucker rod Bai Qiang1, 2, Pang Bin3, Lin Wei3, Yi Wei3, Yang Shengrong3, Li Jingxuan3, Li Dejun1, 2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.044 Select Cause analysis on surface longitudinal crack of 400E hot rolled ribbed bar Zhou Honglin1, Zhang Na1, Hua Pengmin1, Shi Wei1, Qi Yanfei2 HTM    doi:10.13251/j.issn.0254-6051.2016.07.045 Select High temperature oxidation property of aluminum-containing austenitic heat-resisting steel Wu Xiaodong, Wu Gang, Zhu Jingjing, Li Dongsheng, Cheng Xiaonong HTM    doi:10.13251/j.issn.0254-6051.2016.08.001 Select High-temperature oxidation behavior of Fe-Ni alloy at 600 ℃ in air Wang Zhiwu, Liu Qianqian, Gong Xueting HTM    doi:10.13251/j.issn.0254-6051.2016.08.002 Select Preparation and tensile property of bimodal nanocrystalline Cu-Ag alloy Liu Yingguang，Ju Rongyuan，Li Huijun HTM    doi:10.13251/j.issn.0254-6051.2016.08.003 Select Hot plasticity of 690 MPa grade steel for marine engineering Zhou Yanfeng1，Yan Ling2，Li Shengli1，Zhou Cheng2，Zhang Peng2，Han Peng1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.004 Select Effect of hardness on thermal fatigue of H13 hot work die steel Xu Shuyang, Zuo Pengpeng, Wu Xiaochun HTM    doi:10.13251/j.issn.0254-6051.2016.08.005 Select Aging sensitivity of high hardness tin-plate Wu Shengjie1, Liu Xinyuan1, Li Hualong1, Chen Gang2 HTM    doi:10.13251/j.issn.0254-6051.2016.08.006 Select Effect of heat treatment on microstructure and hardness of CoCrFeNiMo high entropy alloy Liu Liang, Zhang Yue, Zhao Zuofu, Shang Jian HTM    doi:10.13251/j.issn.0254-6051.2016.08.007 Select Effect of quenching temperature on ferrite content of 1Cr13 martensitic stainless steel Liu Hailong, Dang Shue，Liu Jiansheng HTM    doi:10.13251/j.issn.0254-6051.2016.08.008 Select Measurement and analysis of CCT curves of ship plate steel Li Xiaolin 1, Li Hongbin2, Lin Zhe 1, Li Shuo1, Xu Shucheng1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.009 Select Continuous cooling transformation behavior of undercooled austenite of 30CrMnTi steel Wang Lijun, Li Baoxiu, Chen Jilin, Zhai Jinpo, Feng Zhongxian, Wang Ningtao HTM    doi:10.13251/j.issn.0254-6051.2016.08.010 Select Aging law of T23 steel final superheater tube serviced for different time Xu Kai1, He Cheng2, Li Wensheng2, Zhao Jianping2, Ai Hong2, Zhang Siwen2, Shi Baoliang3, Ren Ai3 HTM    doi:10.13251/j.issn.0254-6051.2016.08.011 Select Aged microstructure and hardness of rare earth microalloyed 700 MPa grade high strength steel during coiling Wang Shuo1, Jin Zili1, Ren Huiping1,2, Zhang Lingyu1, Li Binglei1, Kang Xueliang1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.012 Select Effect on solution holding time on microstructure and mechanical properties of GH4698 superalloy Zhao Yihan, Peng Jianqiang, Zhang Xiaowu, Xing Yurong, Wang Meiying，Liu Xinxin HTM    doi:10.13251/j.issn.0254-6051.2016.08.013 Select Microstructure and composition analysis of CVT metal belt Liu Jingang1,Ge Zhenbin 1, Xiao Lianghong1，Li Quan2 HTM    doi:10.13251/j.issn.0254-6051.2016.08.014 Select Effect of quenching process on microstructure and mechanical properties of ultra-high strength heavy plate Yang Han, Qu Jinbo, Lu Chunjie HTM    doi:10.13251/j.issn.0254-6051.2016.08.015 Select Effect of annealing on microstructure and properties of Zr-4 alloy composite plate Yang Pan, Liu Yunming, Jiang Qiang, Yao Lifu, Zhang Yiyong HTM    doi:10.13251/j.issn.0254-6051.2016.08.016 Select Effect of Cu partitioning on microstructure and mechanical properties of low-carbon steel by I&Q&P process Chen Liansheng, Xu Jinghui, Tian Yaqiang, Zheng Xiaoping, Song Jinying, Mi Zhenpeng HTM    doi:10.13251/j.issn.0254-6051.2016.08.017 Select Effects of solution temperature on corrosion resistance of 2101 saving nickel duplex stainless steel Liu Weixia1, 2, He Yan1, Han Peide1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.018 Select Effects of heat treatment on microstructure and mechanical properties of welded joint of Ti-22Al-25Nb/Ti60 dual alloys Guo Fan1, Guo Hongzhen2, Wang Guoqing3, Ye Mao1, Meng Lingbo1, Jiang Feng1, Liu Yun1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.019 Select Effect of coating speed and annealing on properties of direct Pd-coated copper bonding wire Fan Junling1, Cao Jun2, Gao Wenbin2, Liu Zhiqiang2 HTM    doi:10.13251/j.issn.0254-6051.2016.08.020 Select Effect of enamel firing process on microstructure and properties of 210 MPa grade enamel steel Zhang Yi1, Wu Hongyan2, Wu Tong2, Zhang Qi2, Du Yu2, Du Linxiu2 HTM    doi:10.13251/j.issn.0254-6051.2016.08.021 Select Plasma cladding surface modified layer and its properties on AZ91 alloy for automobile engine Tan Xiaofeng1, Shi Boqiang2, Guo Pengyan3 HTM    doi:10.13251/j.issn.0254-6051.2016.08.022 Select Effects of vacuum HPDC on eutectic Si of Al-Si-Cu alloys during solution treatment Cao Hanxue1,2, Jia Congbo1, Tang Haoxing1, Jiang Hao1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.023 Select Annealing process of SAl 4047 Al-Si alloy solder?wire during drawing Zhu Yanli1, Xu Xiaolong2, Hu Xuefeng2, Ming Tingze2, Hu Guangzhong1, Li Chunlin1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.024 Select Vacuum heat treatment of W6Mo5Cr4V2 cast steel valve seat Wang Hongwei, Gu Min, Zhao Shaofu，Cao Zhiwen，Xu Kunming HTM    doi:10.13251/j.issn.0254-6051.2016.08.025 Select Vacuum die casting and heat treatment of Al-Cu alloy Yang Chengzhi1, Long Siyuan1,2, Wang Peng1, Zhu Shuqing1, Huang Yanyan1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.026 Select Effect of austempering process on microstructure and mechanical properties of ductile iron containing Cr Xing Xiangdong1, Xu Chenyang1, Liu Yiran2 HTM    doi:10.13251/j.issn.0254-6051.2016.08.027 Select Influence of scanning velocity on microstructure and properties of Co-based alloy coatings by diode laser cladding Guo Shirui1, Yi Yunjie2, Yao Jianhua3，4 HTM    doi:10.13251/j.issn.0254-6051.2016.08.028 Select HVOF sprayed coating on surface of main shaft for CNC machine tools and its wear resistance Shu Yufeng 1, Zhang Haiying2 HTM    doi:10.13251/j.issn.0254-6051.2016.08.029 Select Comparison of property improvement of U71Mn, U75V and U78CrV rail steels by online heat treatment Dong Huali HTM    doi:10.13251/j.issn.0254-6051.2016.08.030 Select Application of plasma electrolytic oxidation in vacuum potato seed meter Li Zihui1, Yang Miaoyuan2, Lv Jingqing1,3, Li Guang2, Xia Yuan2, Liu Zhongyuan1, Li Jicheng1, Yang Ying1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.031 Select Surface boronizing process of roof support cylinder piston rod Fang Min HTM    doi:10.13251/j.issn.0254-6051.2016.08.032 Select Effect of heat treatment on corrosion behavior of X80 steel in Yingtan soil simulated solution Wang Xia1，Guo Chenhui1，Chen Yuxiang 2，Sun Yuwei3，Li Houguo1，Shi Shengchuang1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.033 Select Carburizing and quenching optimization and distortion control of18NiCrMo5 steel internal gearring Li Rong, Liang Tairong, Chen Xiaojun HTM    doi:10.13251/j.issn.0254-6051.2016.08.03 Select Material selection and heat treatment of whole bridge plug slip Xue Zhanfeng1, Yuan Dayong2, Wu Jinxia1, Ma Lanrong1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.035 Select Effect of heat treatment on service life of H13 steel bar extruding die Dan Jiapeng1, 2, Yao Zekun1, 2, Hu Jiyun3, Guo Hongzhen1, 2 HTM    doi:10.13251/j.issn.0254-6051.2016.08.036 Select Simulation of induction heating and temperature distribution on roller surface during warm rolling Li Tingting1, Zhou Yueming2, Shu Da1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.037 Select Numerical simulation of temperature and stress fields for main pipeline of AP1000 nuclear power during quenching process Li Chao, Zhou Xianliang, Hua Xiaozhen, Peng Xinyuan, Tang Longshu, Lu Wenjie HTM    doi:10.13251/j.issn.0254-6051.2016.08.038 Select Effect of creep cavity size on stress field of nickel-based alloy Ye Haoyu1, Zhou Yu2, Rao Sixian1 HTM    doi:10.13251/j.issn.0254-6051.2016.08.039 Select Modified Johnson-Cook constitutive equation of Ti-6Al-4V alloy considering high temperature recrystallization Wang Qi, Zheng Bailin, Zhang Kai, Li Yong HTM    doi:10.13251/j.issn.0254-6051.2016.08.040 Select Hot deformation behavior and strain compensation constitutive model of high strength and high toughness Ti6246 alloy Zhu Hongjun HTM    doi:10.13251/j.issn.0254-6051.2016.08.041 Select Failure analysis of HXD3B primary spring used in locomotive Du Peixuan1,2, Liang Yilong1,2, Lei Lei1,2, Jiang Yun1,2,Yang Ming1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.08.042 Select Fracture reason analysis of well-logging stainless steel wire in a western oilfield Long Yan, Kuang Xianren, Liu Wenhong, Ding Han, Lin Kai HTM    doi:10.13251/j.issn.0254-6051.2016.08.043 Select Cause analysis of “white circle” phenomenon of GH536 alloy pipe Wang Xiaoqing, Zhang Yindong, Liu Juanjuan HTM    doi:10.13251/j.issn.0254-6051.2016.08.044 Select Microstructure identification for steels Liu Zongchang, Li Yiming HTM    doi:10.13251/j.issn.0254-6051.2016.08.045 Select Microstructural evolution of Inconel 718 Ni-based superalloy remanufactured by pulsed plasma arc Wang Kaibo, Lü Yaohui, Liu Yuxin, Xu Binshi HTM    doi:10.13251/j.issn.0254-6051.2016.09.001 Select Continuous cooling transformation behavior of 10B33 boron microalloyed medium carbon steel for cold heading Ruan Shipeng1, 2，3, Zhao Aimin1，Cui Juan2, 3，Han Guangjie2, 3, Guo Mingyi2, 3 HTM    doi:10.13251/j.issn.0254-6051.2016.09.002 Select Study on FePd nanoparticle prepared by solvothermal method and its properties Chen Yanping, Wang Chen, Xiao Xiaobo, Ding Hao, Wang Kui HTM    doi:10.13251/j.issn.0254-6051.2016.09.003 Select Dynamic recrystallization behavior of 30CrMo steel based on CSP process Wu Hao, Xu Liu, Bao Siqian, Zhao Gang, Chen Jianhui HTM    doi:10.13251/j.issn.0254-6051.2016.09.004 Select Effects of Ti and Ta content on precipitation of new Co-based high temperature alloy containing Cr Yu Hongyao1,2, Bi Zhongnan2, Tang Chao2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.005 Select Evolution of carbides in high carbon martensite stainless steel 8Cr13MoV during spheroidizing annealing process Yu Wentao, Li Jing, Shi Chengbin, Zhu Qintian, Song Huidong HTM    doi:10.13251/j.issn.0254-6051.2016.09.006 Select Oxidation and corrosion resistance of Cr3C2-NiCr coating at high temperature Zhang Shan, Li Qiang, Zheng Zhenhuan HTM    doi:10.13251/j.issn.0254-6051.2016.09.007 Select Effect of cyclic load amplitudes on fatigue crack propagation behavior of 7075-T7451 aluminum alloy Huang Zhiwei，Wang Jingxue，Zhang Xingquan，Duan Shiwei，Chen Bin，Huang Zhilai，Pei Shanbao HTM    doi:10.13251/j.issn.0254-6051.2016.09.008 Select Effect of Al63Cu25Mn12 quasi-nucleating agent on aluminium alloy microstructure Shi Yiyang, Wang Chen, Xiao Wenhao, Ai Yanling HTM    doi:10.13251/j.issn.0254-6051.2016.09.009 Select Transition temperature of phase structure of TiO2 thin films prepared by magnetron sputtering Mei Hailin, Tang Lidan, Wang Bing, Dong Guojian HTM    doi:10.13251/j.issn.0254-6051.2016.09.010 Select Precipitation mechanism of 0Cr19Mn21Ni2N austenitic stainless steel for non-magnetic drill collar during isothermal aging at 800 ℃ Zhang Shixiao1,2, Cui Yan1, Qu Huapeng2, Cao Chengxiang3, Lang Yuping2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.011 Select Microstructure and bonding property of cladded Cu/Mo/Cu composite interface Zhang Bing1，Zhang Renjie1，Wang Le1，Zhang Xunhui1, Zhu Lele2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.012 Select Effect of sulfide inclusions on pitting behavior of steel Zhang Chi1, Zhang Shuangjie1, Feng Jie1, Yang Shufeng2, Dai Yongjuan1 HTM    doi:10.13251/j.issn.0254-6051.2016.09.013 Select Microstructure and properties of Ni-P-B4C electroless composite plating on A356 alloy surface Ren Xin, Zhang Chongyi, Xuan Zihang, Zhao Ruishan HTM    doi:10.13251/j.issn.0254-6051.2016.09.014 Select Microstructure of Ti-Al-304L stainless steel composite plate prepared by thermal diffusion method Xu Zhefeng HTM    doi:10.13251/j.issn.0254-6051.2016.09.015 Select Effect of austenite reverse transformation and Q&P process on microstructure and mechanical properties of high strength low alloy steel An Baifeng1, Gao Guhui1, Gui Xiaolu1, Bai Bingzhe1,2, Weng Yuqing1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.016 Select Effect of cold rolling reduction on primary and secondary recrystallization of Hi-B steel Tang Shunqi, Bao Siqian, Chen Jianhui, Zhao Gang, Peng Lian, Guo Jinxing HTM    doi:10.13251/j.issn.0254-6051.2016.09.017 Select Effect of annealing on microstructure and properties of high-entropy FeCoCrNiB/SiC alloy coating prepared by laser cladding Zhang Chong1,2, Huang Biao1, Dai Pinqiang1,3 HTM    doi:10.13251/j.issn.0254-6051.2016.09.018 Select TMCP process of Nb-V micro-alloyed hot rolling H-beam steel for polar offshore platform Xu Wenxi1, Pan Hongbo2, Yan Jun2, Zhang Jian3, Wu Baoqiao3, Xing Jun3 HTM    doi:10.13251/j.issn.0254-6051.2016.09.019 Select Rapid annealing of warm rolling AZ31 magnesium alloy sheet Ji Wenbo, Zhao Hongyang, Hu Xiaodong, Wang Zhenmin, Liu Zijian HTM    doi:10.13251/j.issn.0254-6051.2016.09.020 Select Effect of ultrasonic squeeze strengthening on fatigue behavior of TC6 titanium alloy Hui Li1,2, Yang Linqing1,2, Xu Liang1,2, Wang Lei1,2, Zhou Song, Liu Peng1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.021 Select Effect of reduction ratio on microstructure and properties of hot-rolled stainless steel clad plate Wang Zepeng1, Zhang Hongmei1, Fu Kuijun2, Jiang Jianbo2, Liu Fangfang2, Wang Jiaji2, Ji Yumei2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.022 Select Influence of laser power on microstructure and properties of Ni-based WC cladding layer Li Zhen1, Sun Ronglu1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.023 Select Effect of heat treatment on microstructure and properties of Cu-Cr-Zr-Ni-Si-B alloy Zhou Qingquan, Shuai Gewang, Liu Jianbin HTM    doi:10.13251/j.issn.0254-6051.2016.09.024 Select Effect of process parameters on microstructure and properties of Fe90 plasma surfacing layer for drill pipe joint Liu Jinsheng, Ma Yuejin, Yang Jie,Zhao Jianguo, Li Jianchang, Zhang Xu, Hao Jianjun HTM    doi:10.13251/j.issn.0254-6051.2016.09.025 Select Effect of preheating method on depth and properties of nitrogen carbon and oxygen composite coating on 3Cr13 stainless steel Cheng Yu, Ding Hao, Zhu Shigen HTM    doi:10.13251/j.issn.0254-6051.2016.09.026 Select Influence of heat treatment on microstructure and impact property of X60 high frequency resistance welded pipe with defects Zhao Jinlan, Liu Yinglai, Wang Chang’an, Nie Xianghui, Wang Gaofeng, Yang Fenglan HTM    doi:10.13251/j.issn.0254-6051.2016.09.027 Select Heat treatment process of a new martensitic ductile cast iron containing carbide Huang Manman1, Ju Zilai1, Jiang Likun2, Guo Jianbin3 HTM    doi:10.13251/j.issn.0254-6051.2016.09.028 Select Effect of cooling rate on microstructure and properties of E690 steel for offshore platform Feng Xiaoming1, Luo Diqiang2, Sun Lefei1, Zhao Qingsong2, Wu Chunhong2, Lai Chaobin2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.029 Select Heat treatment of Q550C ultra heavy plate Yang Yang1，Tang Zhenglei1,2，Ding Jian1，Li Zhongbo1，Xu Shaopu1，Gao Zhaohai1 HTM    doi:10.13251/j.issn.0254-6051.2016.09.030 Select High temperature rapid annealing process of 5182 aluminium alloy automotive sheet Hu Chuanbin, Huang Chengyi, Ren Yuelu, Lai Shizhen HTM    doi:10.13251/j.issn.0254-6051.2016.09.031 Select Effect of solution temperature on microstructures and mechanical properties of TC17 alloy fabricated by electron beam wire deposition Yang Yang1, Suo Hongbo1, Chen Zheyuan1, Wang Lei2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.032 Select Effect of annealing on microhardness of commercial purity titanium by ECAP Wang Hai1, Zhao Xicheng2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.033 Select Isothermal quenching of a new kind of Cr-Mo-Ni-Mn-Si alloy steel Huang Zeting, He Yunhong HTM    doi:10.13251/j.issn.0254-6051.2016.09.034 Select Static etching process of H13 and H11 steel in hot liquid A356 aluminum alloy Cao Hanxue1,2, Jiang Hao2, Tang Haoxing2, Jia Congbo2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.035 Select Application of LabVIEW to thermal calculation of spherical tank heat treatment Li Tingting1，Ma Songling1，Lu Zhongbao2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.036 Select Spheroidizing mechanism and life prediction of 20G pearlite steel used for power plant Zhao Qiuhong1，Jiang Bin1，Wang Jiamei2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.037 Select Research on oxidizing?burning?loss?of?heating?furnace and improvement measures Yang Liqin, Ding Meiliang HTM    doi:10.13251/j.issn.0254-6051.2016.09.038 Select Comparison of two kinds of three-dimensional grain growth theory model Wang Yaohua1, Wang Hao2,Liu Guoquan2,3 HTM    doi:10.13251/j.issn.0254-6051.2016.09.039 Select Analysis on peeling defects of cold-rolled sheet and its influencing factor Tian Yaqiang, Li Ran, Song Jinying, Zhang Ronghua, Zheng Xiaoping, Chen Liansheng HTM    doi:10.13251/j.issn.0254-6051.2016.09.040 Select Fracture failure analysis of blower shaft Wang Ruomin, Chen Guohong, Shi Peng, Miao Chunhui HTM    doi:10.13251/j.issn.0254-6051.2016.09.041 Select Fracture failure analysis of Cr12 die He Kailin HTM    doi:10.13251/j.issn.0254-6051.2016.09.042 Select Temperature field design and optimization of CTF-2000 through type tempering furnace Shu Dongfang HTM    doi:10.13251/j.issn.0254-6051.2016.09.043 Select Technical modification of resistance furnace conforming to the AMS 2750E for special alloy heat treatment Xu Fei1, Yang Zhenming2, Li Shenghua1, Shao Huichang1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.044 Select Cooling characteristics and application of AQ110 polymer quenching medium Zhang Chunlei1, Li Zongke2, Shao Honghong2, Qi Yongdong2, Zhu Zihong2, Qi Changyang2 HTM    doi:10.13251/j.issn.0254-6051.2016.09.045 Select Distribution of residual stress in medium carbon quenching-partitioning steel Ren Quanzhuang, Huang Feng, Guo Zhenghong HTM    doi:10.13251/j.issn.0254-6051.2016.10.001 Select Caculation of electronic parameters and strength of 10CrMnMoSi dual-phase steel after subcritical quenching Wang Yao 2，Li Chunfu1,2，Lin Yuanhua 1,2,3，Wang Yiwen2，Xiao Qi2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.002 Select Hot deformation behavior of alloy A286 Liao Shulun, Hu Xianjun, Ma Han, Bao Binghui HTM    doi:10.13251/j.issn.0254-6051.2016.10.003 Select Effect of Nb on microstructure and wear resistance of low-carbon Stellite alloy laser cladding coating Ren Fangcheng1，2，Yao Jianhua1，2，Liu Rong3，Chen Xinchao4，Mao Wei4 HTM    doi:10.13251/j.issn.0254-6051.2016.10.004 Select Effect of Ti element and heat treatment on microstructure and properties of 0Cr18Ni10Ti steel wulin1.2,xingchangjun2,yaochunfa,sunguoqiang2,ningxiaozhi2,huliqiu2,yanyuan3 HTM    doi:10.13251/j.issn.0254-6051.2016.10.005 Select Compressive deformation behavior of ZrCuNiAl bulk metallic glass at low temperature Sun Yajuan, Zhai Yanhui HTM    doi:10.13251/j.issn.0254-6051.2016.10.006 Select As-cast microstructure and corrosion resistance of Mg-Zn-Mn alloy Feng Yufei，Song Yiquan，An Yue HTM    doi:10.13251/j.issn.0254-6051.2016.10.007 Select Rupture behavior of 3104 aluminum alloy sheet in-situ observation by SEM Zhang Junli1, 2, Lu Fayun1, 2, Wang Zhao1, 2, Zhao Feng1, 2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.008 Select Isothermal deformation and microstructure properties of machinery forging Tian Weijun1.2, Li Yu2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.009 Select Effects of heating and mold temperature on properties and microstructure of B1500HS boron steels Wang Cheng1, Li Huiping, He Lianfang, Zhang Chunzhi HTM    doi:10.13251/j.issn.0254-6051.2016.10.010 Select Effect of rolling deformation on microstructure and properties of Mg-12Li-3AlSi alloy Zhao Zilong1,Wang Yanli2, Chen Fei1, Gao Qiang1, Liang Wei1 HTM    doi:10.13251/j.issn.0254-6051.2016.10.011 Select Effect of deformation rate on flow stress and microstructure of Ti-IF and Ti+Ce-IF steel Liu Xiangjun，Yang Jichun，Yang Changqiao，Zhang Wenhuai，He Yaoyu，Li Kun HTM    doi:10.13251/j.issn.0254-6051.2016.10.012 Select Microstructure and properties of Alx-(Fe-Cr)100-x alloy by laser sintering Li Gang1, Zhang Jingbo1, Zhang Ming1, Liu Yunting1, An Yajun2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.013 Select Microstructure and mechanical properties of T91 steel after exposure to abnormal high serving temperature Du Baoshuai1,2, Wang Jinhai3, Liu Rui4, Zhang Zhongwen1,2, Li Xinmei2, Deng Hualing1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.014 Select Microstructure and properties of welded joint of construction steel plate Zhang Yuben, Zhao Chengyan HTM    doi:10.13251/j.issn.0254-6051.2016.10.015 Select Formation mechanism of nanostructured Al2O3-13%TiO2 coating fabricated by supersonic plasma spraying Li Changqing, Ye Xionglin, Deng Zhichang HTM    doi:10.13251/j.issn.0254-6051.2016.10.016 Select Effect of ceramic membrane on friction and wear properties of rock bit bearings Xiao Xiaohua1, Chen Song2, Guo Ting2, Huang Bensheng3，Deng Long3, Yao Yao3, Yang Jun3, Zhang Hui3 HTM    doi:10.13251/j.issn.0254-6051.2016.10.017 Select Influence of immersing in liquid aluminum alloy on bonding surface of H13 steel Cao Hanxue1,2, Liu Xi1, Wu Xueyan1, Jiang Hao1 HTM    doi:10.13251/j.issn.0254-6051.2016.10.018 Select Surface modification of T8 steel by pulse detonation-plasma(PDP) technology Zhang Linwei1, Zhang Xu 2, Yu Jiuming1, Zou Jin, Lu Deping, Lu Lei1 HTM    doi:10.13251/j.issn.0254-6051.2016.10.019 Select Structure and properties of W-Ti thin films deposited by magnetron sputtering Sun Guoqi, Sun Yong, Guo Zhongzheng, Duan Yonghua HTM    doi:10.13251/j.issn.0254-6051.2016.10.020 Select Dissolving of secondary phase and its effect on austenitic grain growth in X120 pipeline steel Yu Chunfeng1, Li Jing2, Chu Xiangzhi2, Yang Yuehui2, Yuan Shaoqiang2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.021 Select Thermodynamic equilibrium phases of TP347H steel with different contents of Cr and Ni Wang Wei1, Wang Zhiwu2, Li Wensheng1, Tian Jing2, Zhong Wanli1, Song Tao2, Lin Jiedong1 HTM    doi:10.13251/j.issn.0254-6051.2016.10.022 Select Effect of magnesium silicon composite micro alloying on high strength and high conductivity Cu-Cr-Zr alloy aging process Hou Dongjian1,Wu Lei1,Gao Dawei2,Zhang Qi2,Sun Ning3,Kong Jian1 HTM    doi:10.13251/j.issn.0254-6051.2016.10.023 Select Precipitated phase of tungsten-containing super duplex stainless steel during continuous cooling Zhang Zhihong1,2, Song Hongmei1, Jiang Laizhu1, Cui Zhenshan2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.024 Select Influence of annealing on carbides and nitrides in vanadium containing ferritic stainless steel Chen Meng,Chen Siyue, Yang Yitao HTM    doi:10.13251/j.issn.0254-6051.2016.10.025 Select Effect of grain size on performance of plastic mould steel Guan Aiqin HTM    doi:10.13251/j.issn.0254-6051.2016.10.026 Select Effect of quenching temperature on microstructure and properties of medium-manganese Q&P steel Lin Zhangguo1,2，Tang Di1，Jiang Haitao1，Duan Xiaoge1，Wu Yanxin3 HTM    doi:10.13251/j.issn.0254-6051.2016.10.027 Select Influence of quenching on hydrogen storage performance for Mg5Al3Li2 alloy Huang Xiantun1, Li Liujie2, Xie Zhengzhuan2, Lao Ming2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.028 Select Ion–gas surface hardening process of austenitic stainless steel at low temperature Yang Guangyi, Wang Yonglei, Zhou Mengfei, Zhao Cheng HTM    doi:10.13251/j.issn.0254-6051.2016.10.029 Select Effect of quenching temperature on tensile properties of 20CrNi2Mo steel Zou Xiong1,2,Liang Yilong1,2,Long Shaolei1,2,Lei Lei1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.030 Select Influence of heat treatment on structure and properties of nanostructured Ni-W coating Wang Xia1，Li Houguo1，Chen Yuxiang2，Hou Duo3，Guo Chenhui1，Shi Shengchuang1 HTM    doi:10.13251/j.issn.0254-6051.2016.10.031 Select Effect of intercritical quenching process on microstructure and properties of an ultra-high strength steel Zhang Kuan, Zhen Fan, Qu Jinbo HTM    doi:10.13251/j.issn.0254-6051.2016.10.032 Select Mechanical properties and springback analysis of aging forming thin sheet of 7050-based in different electric field strength Zuo Duquan1,2，Li Junchu2，Zhu Yideng2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.033 Select Effect of heat treatment temperature on microstructure and properties of TA10 titanium alloy after forging Cheng Shuaipeng1.2，Su Juanhua1,2，Ren Fengzhang1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.034 Select Effect of dual-phase region partitioning temperature on microstructure and properties of low carbon steel containing copper with I&Q&P process Chen Liansheng, Mi Zhenpeng, Tian Yaqiang, Zheng Xiaoping, Song Jinying, Xu Jinghui HTM    doi:10.13251/j.issn.0254-6051.2016.10.035 Select Effects of aging time on microstructure and fatigue crack propagation behavior of 2205 duplex stainless steel Huang Ao, Chen Ji, Song Jian, Liu Yuanfu, Chang Ji HTM    doi:10.13251/j.issn.0254-6051.2016.10.036 Select Effect of hot extrusion process on microstructure and properties of 6061 aluminum alloy Wang Jian, Lu Yalin, Xu Wenting, Li Xingcheng HTM    doi:10.13251/j.issn.0254-6051.2016.10.037 Select Effect of controlled cooling after rolling on microstructure and properties of microalloyed non-quenched and tempered steel 36MnVS6 Gan Wei HTM    doi:10.13251/j.issn.0254-6051.2016.10.038 Select Effect of annealing on Mg-Al clad sheets by rolling Liu Zijian，Zhao Hongyang，Hu Xiaodong, Liu Meng，Ji Wenbo HTM    doi:10.13251/j.issn.0254-6051.2016.10.039 Select Effect of annealing on microstructure and properties of 5052 alloy for architectural Yang Zhe1，Fu Wen2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.040 Select Effect of heat treatment on mechanical properties of 42CrMoNi steel bearing ring Wan Mingzhen, Liu Hongbo, Zhu Qianhao, Fan Yu, Chen Lei HTM    doi:10.13251/j.issn.0254-6051.2016.10.041 Select Grain size and topology characteristics of three-dimensional pure iron microstructure Wang Yaohua1,Wang Hao 2,Liu Guoquan 2,3, Xue Weihua2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.042 Select Bright dot defect analysis of hot dip galvanized dual phase steel Wu Qingmei, Zheng Lianhui, Cai Chuanbo, Xia Jing, Fu Zheng HTM    doi:10.13251/j.issn.0254-6051.2016.10.043 Select Analysis on cold-heading-cracking reason of ML45Mn2 steel for gear transmission shaft Wang Zhiyi, Wang Lijun, Chen Jilin, Wang Ningtao, Zhai Jinpo, Feng Zhongxian HTM    doi:10.13251/j.issn.0254-6051.2016.10.044 Select Analysis of material and heat treatment quality for roller of foreign mill bearing Liang Zhiqiang1，Zhang Ling1,2, WangYujie1, Zeng Chaofan1,2, Sun Wei1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.10.045 Select Effect of -fiber texture fraction on surface ridging of 430 ferriticstainless steel Zhang Zhilei1, Chen Jichang1, Huang Hongchuan1, Wang Jun’an1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.001 Select Analysis of normalized precipitation behavior of silicon steel Zhang Yang, Yuan Zexi HTM    doi:10.13251/j.issn.0254-6051.2016.11.002 Select Effect of quenching, lamellarizing and tempering process on tempering stability of 9NiCrMo steel Chen Jian1, Li Shanshan2, Cui Lihui1, Shen Junchang1 HTM    doi:10.13251/j.issn.0254-6051.2016.11.003 Select Microstructure and properties of TiCrAlSiCN coating Guo Yan, Li Taijiang, Li wei, Wang Caixia HTM    doi:10.13251/j.issn.0254-6051.2016.11.004 Select Phase transformation and mechanical properties of X100 pipeline steel under controlled rolling and controlled cooling Wang Quan1, Wu Pengxiang1-3, Sun Tingting1, Xu Qiang2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.005 Select Effects of carbide and tempering time on heat treatment distortion of Cr12MoV steel Huang Zhitao1, Tian Wenhuai2, Li Chuhua2, Wang Jianping2, Suo Hongbo1 HTM    doi:10.13251/j.issn.0254-6051.2016.11.006 Select Effect of initial microstructure on microstructure evolution of medium carbon and medium carbon alloy steels during annealing Wang Lijun, Chen Jilin, Zhai Jinpo, Feng Zhongxian, Wang Ningtao HTM    doi:10.13251/j.issn.0254-6051.2016.11.007 Select Friction and wear properties of 316L stainless steel after shot peening Yang Shiting， Xing Yongming, Lang Fengchao, Li Jijun, Jiang Aifeng HTM    doi:10.13251/j.issn.0254-6051.2016.11.008 Select Effect of aging treatment on microstructure of GH4145 bolt at 560 ℃ Du Jinfeng HTM    doi:10.13251/j.issn.0254-6051.2016.11.009 Select Microstructure degradation and properties evalution of T91 steel during aging Huang Jindu, Mei Jianping, Yan Jingli, Wang Shiqin HTM    doi:10.13251/j.issn.0254-6051.2016.11.010 Select Microstructure and corrosion resistance of hot-extruded AM50 magnesium alloy modified by rare earth Er Yang Miao1, 2, Zhang Zhiyi1, Sun Bei1, Han Xianlong1 HTM    doi:10.13251/j.issn.0254-6051.2016.11.011 Select Effect of nitrogen content and finishing rolling temperature on microstructure and mechanical properties of micro-alloying steel for free cutting Zhao Wengui1,2, Tan Li1, Yu Jie1, Zhai Qijie2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.012 Select Effect of Cu content on microstructures and properties of die casting Al-Si alloy Yang Chengzhi1，Long Siyuan1,2，Wang Peng1，Zhu Shuqing1 HTM    doi:10.13251/j.issn.0254-6051.2016.11.013 Select Effect of Al content on microstructure and mechanical properties of high-Mn light-weight steels Feng Hao1, Liu Rendong2, Qiao Jun1, Guo Jinyu2, Xu Rongjie2, Han Peng1, Zhou Yanfeng1 HTM    doi:10.13251/j.issn.0254-6051.2016.11.014 Select Hot ductility behavior of M35 high speed steel Wang Jian1, Ma Dangshen2, Zhou Yun1, Chi Hongxiao2, Zhou Jian2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.015 Select Thermal fatigue behavior of ductile iron QT400 Zhang Huifang, Lü Dong, Zhang Quan, Zhang Zhifeng, Lü Zhiqing HTM    doi:10.13251/j.issn.0254-6051.2016.11.016 Select Dynamic continuous cooling transformation of X65MS pipeline steel Zhu Ziyi1, Huang Guojian2, Wang Ya’nan1, Huang Minghao2, Liu Wenyue2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.017 Select Effect of cooling processing parameters onmicrostructure and properties of 600 MPa grade hot-rolled dual phase steel Gu Hairong1, Zhao Zhengzhi1,2, Zhao Aimin1,2, Zhu Zhifeng1 HTM    doi:10.13251/j.issn.0254-6051.2016.11.018 Select Electric contact strengthening and properties of Ni-P/WC-Al2O3 composite coating by electro brush plating Xu Mengkuo, Zhu Shigen, Ding Hao HTM    doi:10.13251/j.issn.0254-6051.2016.11.019 Select Effect of spheroidizing isothermal temperature on microstructure of high carbon steel Wang Qi1,2， Li Xiaoyuan2，Shi Jie2，Yang Xirong1，Yu Bin2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.020 Select Spheroidizing annealing of SCM435 cold heading steel Nan Pengfei1,2，Wang Fuming1,2，Liu Zhenming3，Li Yongliang1,2，Zhang Jing1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.021 Select Influence of heat treatment on mechanical properties of WC particulates reinforced steel matrix composites by composite electroslag melting and casting Zhang Ning1, 2, Qiang Yinghuai2, Yang Li3, Lu Xinghua1 HTM    doi:10.13251/j.issn.0254-6051.2016.11.022 Select Effect of cooling method on microstructure of RE microalloyed high strength steel Zhang Lingyu1,2, Ren Huiping2, Jin Zili1, Kang Xueliang1,2, Wang Shuo1,2, Li Binglei1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.023 Select Effect of heat treatment on microstructure and wear resistance of 440A steel Qi Yesi1, 2, Zuo Lingli1, 2, Tian Lizhong3, Qi jifu3, Wang Huiqiu3, ZhangYang1, 2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.024 Select Work hardening and recrystallization temperature of multi-phosphor bronze alloy Ma Jimiao1, Liu Feng1, Liao Junjun1, Zheng Yun1, Chen Wensong1, Lu Xiaoyong1, Shi Congfei1, HTM    doi:10.13251/j.issn.0254-6051.2016.11.025 Select Surface modification and its wear and corrosion resistance of AZ91 alloy for automotive engine cylinder Ji Yudan1, Du Chaobo 2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.026 Select Effects of heat treatments on hydrogen-induced cracking resistance of X65 pipeline steel Zhang Qingqing, Zhang Chuanguo, Zheng Lei HTM    doi:10.13251/j.issn.0254-6051.2016.11.027 Select Two-step aging behavior of ZM6 magnesium alloy Lun Yuchao，Wang Liping，Zhao Sicong，Xin Beiping，Yu Zemin HTM    doi:10.13251/j.issn.0254-6051.2016.11.028 Select Preparation of high hardness surface layer on stainless steel by QPQ treatment Zhan Weijun, Lu Jianshu HTM    doi:10.13251/j.issn.0254-6051.2016.11.029 Select Ni-Ce-P electroless plating and properties of the coating on 27SiMn steel Hao Zhiyong, Zhang Fengjia, Yue Lixin HTM    doi:10.13251/j.issn.0254-6051.2016.11.030 Select Effect of heat treatment on high-temperature tensile properties of 25CrMoNiVNbTi steel Chen Xiaowen, Li Renpu, Zhang Defen, Tang Yu, Li Ting, Zhu Ya HTM    doi:10.13251/j.issn.0254-6051.2016.11.031 Select Simulation and analysis of influence of induction heating frequency on heating process Chen Tianxiang, Wang Zhanjun HTM    doi:10.13251/j.issn.0254-6051.2016.11.032 Select Effect of normalizing control cooling process on microstructure and properties of high-strength steel plate EH36 for marine engineering Zhang Peng，Wang Tengfei HTM    doi:10.13251/j.issn.0254-6051.2016.11.033 Select Heat treatment of large thin-walled titanium alloy parts Pan Hao, Jiang Xilong, Han Baohui, Chen Ying HTM    doi:10.13251/j.issn.0254-6051.2016.11.034 Select Heat treatment of 21CrMoV5-7 steel forged piston head Yin Xiaosong, Dong Xugang, Wu Zongwen, Ma Xiaolin HTM    doi:10.13251/j.issn.0254-6051.2016.11.035 Select Countermeasures for sharp corner cracking of workpiece during induction hardening Chen Liang HTM    doi:10.13251/j.issn.0254-6051.2016.11.036 Select Volume analysis method of phase transition of 2024 aluminum alloy and its application Chen Kun, Wu Xinmeng, Liu Kejia, Chen Huifen HTM    doi:10.13251/j.issn.0254-6051.2016.11.037 Select SH-CCT curve of X100 pipeline steel under the action of stress Li Hongbin1.2, Lin Zhe 1.2, Fang Fang3, Xu Shucheng1.2, Li Xiaolin 1.2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.038 Select Failure analysis of fractured cylinder bolts Yang Chun1,2, Zhong Zhenqian1, Si Hong1, Xie jinpeng1 HTM    doi:10.13251/j.issn.0254-6051.2016.11.039 Select Failure analysis and improvement measures of Cr12MoV steel punching die Meng Xianna 1, Zhang Daoda2, Yao Dengcan2, Chen Wanglin3 HTM    doi:10.13251/j.issn.0254-6051.2016.11.040 Select Surface modification of C61900 copper alloy using a composite technology via coating and doping Zou Bohua1，Wang Yue2，ZhuYandan2, Wang Yixue2, Yan Mufu2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.041 Select Effect of plasma nitriding process on microstructure and properties of 38CrMoAl steel for hydraulic plunger Chen Yao1, Song Lei1, Zhang Chenkai1, Ye Xuemei2, Hu Jing1 HTM    doi:10.13251/j.issn.0254-6051.2016.11.042 Select Effect of ultra-fine Fe-N powder addition on microstructure and mechanical properties of Fe-C-Cu alloy Li Ai1, Ding Zongkai2，Hu Yang1, Li Hang1，Cui Guodong1，Yang Chuan1，Zhang Chengsong1 HTM    doi:10.13251/j.issn.0254-6051.2016.11.043 Select Comparative study on corrosion resistance of nitrided layer between alloy steel and carbon steel Zhang Jingbao1, Ding Zongkai2, Zhang Chengsong1, Yang Chuan1 HTM    doi:10.13251/j.issn.0254-6051.2016.11.044 Select Material selection and heat treatment of cable socket for bridge Zhou Zhubing1, 2 HTM    doi:10.13251/j.issn.0254-6051.2016.11.045 Select Microstructure evolution of cast duplex stainless steel during aging Cao Jing1, An Licong1, Yang Yitao1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.12.001 Select Isothermal transformation kinetic curves and microstructure of high carbon wire steel Xiong Hu1, Liang Yu1,2, Li Jing1 HTM    doi:10.13251/j.issn.0254-6051.2016.12.002 Select Microstructure of plasma nitriding layer of Fe-based superalloy GH2132 Hou Caiyun, Xu Xiaolei, Yu Zhiwei HTM    doi:10.13251/j.issn.0254-6051.2016.12.003 Select Electrochemical corrosion behavior of biomass boiler superheater steel in mixed alkali metal molten salts He Jianjun, Long Kailiang, Zhang Wei, Ren Yanjie, Chen Jian, Xiong Weizhou HTM    doi:10.13251/j.issn.0254-6051.2016.12.004 Select Comparison on microstructure and corrosion resistance of 2209 and 2507 duplex stainless steel surfacing layers Wang Shunhua1, Ni Yu1, Zhang Jianxiao2, Shi Wei3, Hao Geng1 HTM    doi:10.13251/j.issn.0254-6051.2016.12.005 Select Microstructure and properties of 42CrMo steel ring formed by centrifugal casting and ring rolling after heat treatment Wei Xiaojian, Qi Huiping, Li Yongtang, Qin Fangcheng, Li Guang HTM    doi:10.13251/j.issn.0254-6051.2016.12.006 Select Microstructure and mechanical properties of spot welding joint of AZ31 magnesium alloy/6061 aluminum alloy Yang Shaobin1, Yang Dongxu1, Dong Wei1, Gao Chuan2, Sheng Ding1 HTM    doi:10.13251/j.issn.0254-6051.2016.12.007 Select Annealed microstructure of high pure aluminum target Zhou Yuchuan, Yang Li, Wang Yun, Li Peng, Xia Yafeng, Fan Han HTM    doi:10.13251/j.issn.0254-6051.2016.12.008 Select Microstructure and residual stress distribution of friction welding joint of 2205 duplex stainless steel Yang Feng1, 2, Shi Duanhu1, 2, Lu Xinghua1, 2, Zhang Yuzheng1 HTM    doi:10.13251/j.issn.0254-6051.2016.12.009 Select Microstructure and properties of WC-Co/CoMoCrSi composite coating prepared by detonation gun spraying Tian Haoliang, Cui Yongjing, Wang Changliang, Guo Mengqiu, Gao Junguo, Zhang Huanhuan HTM    doi:10.13251/j.issn.0254-6051.2016.12.010 Select Influence of alloy elements on microstructure and mechanical properties of low alloy wear-resistant steel Lian Rongbiao1, Song Xinli1, Ma Yuxi1, 2, Liu Biao1 HTM    doi:10.13251/j.issn.0254-6051.2016.12.011 Select Effect of TiO2 adding on microstructure and properties of high manganese steel hardfacing layer Niu Ben1,2, Yi Yaoyong2, Yi Jianglong2, Wang Kai2, Liu Hongxi1 HTM    doi:10.13251/j.issn.0254-6051.2016.12.012 Select Effect of niobium content on the precipitated phases and creep rupture properties of S31042 steel Wang Bin1,2, Liang Jun1, Jin Hongyang2, Liu Zhengdong3, Cheng Shichang3, Wang Jingzhong4 HTM    doi:10.13251/j.issn.0254-6051.2016.12.013 Select High temperature thermoplasticity and austenite grain growth behavior of Nb and V microalloyed steel rebar Xie Changsheng1, Pan Hongbo2, Yan Jun2, Zhang Jian3, Yu Tongren3, Guo Zhan3 HTM    doi:10.13251/j.issn.0254-6051.2016.12.014 Select Effect of Si, Mg content on microstructure and microhardness of Al-Mg-Si alloy Li Jiashuang, Qu Min, Cui Yan, Liu Fengbin HTM    doi:10.13251/j.issn.0254-6051.2016.12.015 Select Optimization of Gd content in Mg-Gd-Y-Nd-Zr casting alloy Tang Changping 1,2, Liu Wenhui 1,2, Chen Yuqiang 1,2, Liu Xiao 1,2, Deng Yunlai 3 HTM    doi:10.13251/j.issn.0254-6051.2016.12.016 Select SHCCT curve measurement of TC18 titanium alloy Quan Chunyi1, Dong Wenchao2, Jiao Qingyang1, Li Shijian1, Sun Zhonghai1, Lu Shanping2 HTM    doi:10.13251/j.issn.0254-6051.2016.12.017 Select Influence of heat treatment parameters on microstructure and mechanical property of dual phase austempered ductile iron Zeng Weihe1, Tian Yingxin2, Li Dejiang1, Liu Jinlin2, Zeng Xiaoqin1 HTM    doi:10.13251/j.issn.0254-6051.2016.12.018 Select Homogenization heat treatment of 2219 aluminum alloy ingots Huang Yuanchun1,2,3，Yang Chuge1,2，Liu Yu3，Liu Xiang3，Li Yin3 HTM    doi:10.13251/j.issn.0254-6051.2016.12.019 Select Effect of tempering on microstructure and mechanical properties of marine engineering?steel E690 Shuai Yong1,2, Sun Lefei2, Yan Bo2, Fu Qingxia2, Shao Hua2 HTM    doi:10.13251/j.issn.0254-6051.2016.12.020 Select Effect of solid solution treatment on microstructure and performance of nitrogen microalloyed high strength invar alloys Sun Daozhu1, Sun Zhonghua2, Tong Chen1, Jia Jianxi1, Zhang Yunfei2, Peng Huifen2 HTM    doi:10.13251/j.issn.0254-6051.2016.12.021 Select Low-temperature aluminizing process of 304 stainless steel assisted by sand blasting Li Yamin，Hou Shufeng HTM    doi:10.13251/j.issn.0254-6051.2016.12.022 Select Microstructure and properties of low carbon silicon manganese steel treated by Mn pre-partitioning I&Q&P process Ren Zhenquan, Tian Yaqiang, Li Ran, Song Jinying, Wei Yingli, Dai Xin, Chen Liansheng HTM    doi:10.13251/j.issn.0254-6051.2016.12.023 Select Process optimization of Co-based coating on H13 steel by laser cladding and its microstructure and properties Ye Hong1,2, Yu Wenxin1,2, Lei Linping1, Mao Shuang1,Tang Chao1 HTM    doi:10.13251/j.issn.0254-6051.2016.12.024 Select Effect?of annealing?time?on?microstructure?and?mechanical?properties of 316L??stainless?steel with?micronano?structure Shen Guang1, Wei Fu’an1, La Peiqing1, Meng Qian1,2, Wang Hongding2, Shi Ting1, Ma Fuliang1, Wei Yupeng1, Guo Xin1, Sheng Jie1 HTM    doi:10.13251/j.issn.0254-6051.2016.12.025 Select Effect of cryogenic treatment on microstructures and mechanical properties of welded joint of 6005A alloy Ji Kai, Ni Geng, Li Xiaobing, Xu Yusong HTM    doi:10.13251/j.issn.0254-6051.2016.12.026 Select Effects of drawing deformation and annealing process on microstructure and properties of copper clad pure iron wire Zhu Yingyu1, Yuan Dawei1, Chen Jianming1, Chen Huiming2 HTM    doi:10.13251/j.issn.0254-6051.2016.12.027 Select Intermittent gas nitriding of TA2 industry pure titanium under negative pressure Yang Feng, Xiong Mangmang, Zhu Yuanyuan, Liu Jing HTM    doi:10.13251/j.issn.0254-6051.2016.12.028 Select Effect of tempering temperature on microstructure and properties of Cr26-16Mn bimetallic composite plate Xue Qi, Zhou Yi, Dong Pengpeng, Fan Ping, Li Huan HTM    doi:10.13251/j.issn.0254-6051.2016.12.029 Select Effect of quenching process on microstructure and hardness of new type high carbon chromium bearing steel GCr17Mo Zhang Ling1,2, Sun Xiaodong1,2, Wang Yujie1, Liang Zhiqiang1,Yang Zheng1,2, Zeng Chaofan HTM    doi:10.13251/j.issn.0254-6051.2016.12.030 Select Influence of pre-aging time on microstructure and mechanical properties of 6016 aluminum alloy for automobile Li Hui1,2, Zhang Hua2, Zhu Zhenfeng1, Zhao Qi 1, Jiang Haitao3 HTM    doi:10.13251/j.issn.0254-6051.2016.12.031 Select Influence of heat treatment on mechanical properties of precipitation strengthened Fe-Ni based corrosion-resistant alloy hot extrusion heavy wall pipe Liu Haiding1, 2, 3, Wang Dongzhe1, 2, 3, Huang Guoping1, Huang Min1, 2, Zhao Anzhong1, 2, 3 HTM    doi:10.13251/j.issn.0254-6051.2016.12.032 Select Fast cooling process control system for medium and heavy plate after normalizing Han Yi, Fu Tianliang, Deng Xiangtao, Wang Zhaodong HTM    doi:10.13251/j.issn.0254-6051.2016.12.033 Select Optimization of water flow and roller velocity at high-pressure water injection zone of roller-type quenching machine Zhang Jingkui, Dong Hua, Zhou Enze HTM    doi:10.13251/j.issn.0254-6051.2016.12.034 Select Simulation on bending deformation evolution of U75V rail during cooling process after rolling Chen Lin, Li Xiaona, Zhang Zhiyang, Li Zeyuan, Liu Yuyan HTM    doi:10.13251/j.issn.0254-6051.2016.12.035 Select Temperature field distribution of BNbRE rail during air-jet cooling An Xiaofan1, Wang Haiyan2,3, Chen Shuming3, Chen Lin2, Zheng Mengzhu2,3, Wu Zhifeng2 HTM    doi:10.13251/j.issn.0254-6051.2016.12.036 Select Method for displaying dendrite of gear steel continuous casting billet by using alloy element segregation Liu Yangbo, Tong Qian, Sun Qisong, Ding Ning, Wen Juan HTM    doi:10.13251/j.issn.0254-6051.2016.12.037 Select Bursting failure analysis of 35CrMo steel gas cylinder during heat treatment Zhou Jun1, Fan Xiangfang1, Zheng Qiuyan2,Zhao Jianming2,Huang Weili1 HTM    doi:10.13251/j.issn.0254-6051.2016.12.03 Select Quenching crack analysis and counter measures of 40CrMnMo steel single pump body Jiang Rusong1, Liao Yonghong2 HTM    doi:10.13251/j.issn.0254-6051.2016.12.039 Select Fracture failure analysis of grade 12.9 bolt?for fuel gas pressure regulating valve Zhao Jinlan1,2, Liu Yinglai1,2, Wang Chang’an1,2, Nie Xianghui1,2, Xu Yan1,2, Yang Fenglan1,2 HTM    doi:10.13251/j.issn.0254-6051.2016.12.040 Select Investigation on controversial clauses in different nuclear power standards Yu Sijie1, Han Li2, Qu Shichao2,Wang Jun2, Gu Min2, Ge Shutao2 HTM    doi:10.13251/j.issn.0254-6051.2016.12.041