Volumn Content

• Heat Treatment of Metals 2014 Vol.39 Please wait a minute... For Selected: Download Citations EndNote Ris BibTeX Toggle Thumbnails Select Research on austenite grain growth behavior of offshore platform steel E690 Sun Lefei, Wang Fuming HTM    2014, 39 (1): 1-6.   Abstract （530）      PDF （262KB）（283）       Knowledge map    Reference | Related Articles | Metrics Select Effect of solid solution and aging treatment on microstructure and mechanical properties of Mg-12Li-2Al-1Zn alloy as-rolled Jia Yuxin, Huang Jinliang, Feng Jian HTM    2014, 39 (1): 7-10.   Abstract （337）      PDF （158KB）（225）       Knowledge map    Reference | Related Articles | Metrics Select Effect of start cooling temperature on microstructure and properties of X80 pipeline steel Liu Wenyue, Ren Yi, Gao Hong, Zhang Shuai, Wang Shuang, Zhang Lulin HTM    2014, 39 (1): 11-15.   Abstract （309）      PDF （158KB）（332）       Knowledge map    Reference | Related Articles | Metrics Select Effect of annealing temperature on microstructure and properties of Nb-Ti deep drawing dual-phase steel Chen Jingjing, Zhao Zhengzhi, Wang Zhigang, Zhao Aimin, Ye Jieyun HTM    2014, 39 (1): 15-19.   Abstract （326）      PDF （178KB）（311）       Knowledge map    Reference | Related Articles | Metrics Select Effects of Si additions on intermetallic compound layer at aluminum/steel interface bonded by rolling Zhou Dejin; Chen Zhi; Zhang Xinming; Tang Jianguo HTM    2014, 39 (1): 20-26.   Abstract （316）      PDF （169KB）（363）       Knowledge map    Reference | Related Articles | Metrics Select Effects of Fe content and sintering temperature on microstructure and properties of Al-4Cu-xFe alloy Xing Liang, Li Longbo, Ma Xiangdong HTM    2014, 39 (1): 27-30.   Abstract （298）      PDF       Knowledge map    Reference | Related Articles | Metrics Select Effects of solution treatment on microstructure and properties of medical TiNbZrSn titanium alloy with low elastic modulus Zhang Zhanying, Yang Huabin, Cao Jimin, Chen Zhihong HTM    2014, 39 (1): 31-34.   Abstract （325）      PDF       Knowledge map    Reference | Related Articles | Metrics Select Effects of chemical composition and cooling rate on low temperature ductility of Q345E steel Yuan Min，Bao Shilei，Zhang Hongcai，Sun Dawen HTM    2014, 39 (1): 34-37.   Abstract （304）      PDF （176KB）（267）       Knowledge map    Reference | Related Articles | Metrics Select Effect of solid solution on microstructure and mechanical properties of 7A09 aluminum alloy Ma Dongwei, Wang Min, Hu Zhihua HTM    2014, 39 (1): 38-41.   Abstract （318）      PDF （160KB）（241）       Knowledge map    Reference | Related Articles | Metrics Select The third industrial revolution, advanced manufacturing and heat treatment technology Zhu Sendi HTM    2014, 39 (1): 42-45.   Abstract （283）      PDF （309KB）（201）       Knowledge map    Related Articles | Metrics Select Technological progress and development countermeasures on heat treatment of petroleum pipe and equipment Zhang Guanjun, Liu Yonggang, Ma Qiurong HTM    2014, 39 (1): 46-52.   Abstract （286）      PDF （163KB）（281）       Knowledge map    Reference | Related Articles | Metrics Select Development and prospect of heat treatment technology for rolling bearing parts made of high carbon chromium bearing steel Liu Yaozhong, Fan Chonghui HTM    2014, 39 (1): 53-57.   Abstract （360）      PDF （169KB）（294）       Knowledge map    Reference | Related Articles | Metrics Select The Development and Current Status for Aviation industry heat treatment Sun Feng, Wang Guangsheng, Tong Xiaojun HTM    2014, 39 (1): 58-66.   Abstract （364）      PDF （161KB）（322）       Knowledge map    Reference | Related Articles | Metrics Select Development and prospect of ion nitriding heat treatment technology and equipment Gao Yangzhi，Liu Yingqi HTM    2014, 39 (1): 66-74.   Abstract （325）      PDF （187KB）（318）       Knowledge map    Reference | Related Articles | Metrics Select Corrosion behavior of nitrogen-containing martensitic stainless bearing steel Zheng Shanju, Yang Maosheng , Lei Ting HTM    2014, 39 (1): 75-79.   Abstract （409）      PDF （169KB）（602）       Knowledge map    Reference | Related Articles | Metrics Select Effect of TMCP process on evolution of oxide scale of low carbon steel   Li Hui, Lu Feng, Jiang Haitao, Liu Sheng, Mi Zhenli HTM    2014, 39 (1): 80-84.   Abstract （558）      PDF （170KB）（421）       Knowledge map    Reference | Related Articles | Metrics Select Modification of cast nickel-base superalloy by hot isostatic pressing Wang Wei, Li Qiang, Yang Weicai, Ye Linsen HTM    2014, 39 (1): 85-88.   Abstract （280）      PDF （182KB）（342）       Knowledge map    Reference | Related Articles | Metrics Select Effects of intermediate annealing treatment on recrystallization texture of Ni-7at%W alloy substrate Hu Wangyang; Chen Jichang; Liu Erwei; Wang Junan HTM    2014, 39 (1): 89-94.   Abstract （312）      PDF （177KB）（289）       Knowledge map    Reference | Related Articles | Metrics Select Effects of WC content on microstructure and properties of high-frequency induction cladding coating Ci Wenliang, Lin Chen, Tao Hongwei HTM    2014, 39 (1): 95-98.   Abstract （324）      PDF （164KB）（335）       Knowledge map    Reference | Related Articles | Metrics Select Effect of alloy elements content on mechanical properties of high strength PC steel bar after heat treatment Zhang Feipeng, Dong Haipeng, Li Yongxian, Mao Weiji, Wang Chengbiao HTM    2014, 39 (1): 99-101.   Abstract （299）      PDF （175KB）（307）       Knowledge map    Reference | Related Articles | Metrics Select Effect of annealing process on microstructure and properties ofexplosive-welded titanium-aluminum composite plate Li Tiejun, Peng Haijian, Ma Zhixin HTM    2014, 39 (1): 102-105.   Abstract （308）      PDF （155KB）（283）       Knowledge map    Reference | Related Articles | Metrics Select Effect of heat treatment temperature on the properties of Ni-Fe-P electroless plating Zhang Lei, Li Chunfu, You Guoqun HTM    2014, 39 (1): 106-109.   Abstract （306）      PDF （177KB）（397）       Knowledge map    Reference | Related Articles | Metrics Select Effects of annealing process and rare earth elements on recrystallization and texture of cold rolled SPCC sheet Guo Ruihua, Liu Fangsheng, Wang Linmin, Fu Yueying HTM    2014, 39 (1): 110-113.   Abstract （289）      PDF （155KB）（344）       Knowledge map    Reference | Related Articles | Metrics Select Effect of stabilizing treatment on microstructure and wear resistance of ZA35-0.1Ti alloy Liu Jingfu, Bai Yanhua, Song Jian HTM    2014, 39 (1): 114-117.   Abstract （265）      PDF （171KB）（227）       Knowledge map    Reference | Related Articles | Metrics Select Anodic oxidation of 6063 aluminum alloy with high intermittent current density Huang Yuansheng, Chen Huanming HTM    2014, 39 (1): 117-119.   Abstract （316）      PDF （176KB）（417）       Knowledge map    Reference | Related Articles | Metrics Select Heat treatment process improvement for f9 m large ring forging Dai Yutong, Chen Hong, Qian Xigen HTM    2014, 39 (1): 120-123.   Abstract （406）      PDF （174KB）（416）       Knowledge map    Reference | Related Articles | Metrics Select Postweld local heat treatment of reactor pressure vessel terminating girth Xin Jianmin, Liu Li HTM    2014, 39 (1): 124-127.   Abstract （328）      PDF （299KB）（323）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and mechanical properties of 25Cr2Ni4MoV steel large forgings Tan Lijun, Wang Junqiao, Wang Qingqun, Chen Xinlong, Zhou Sizhu HTM    2014, 39 (1): 128-131.   Abstract （361）      PDF （167KB）（356）       Knowledge map    Reference | Related Articles | Metrics Select An electrochemical etching method to reveal prior-austenite grain boundaries Sun Xuejiao, Lian Fuliang, Liu Yongning, Zhu Jiewu HTM    2014, 39 (1): 132-136.   Abstract （321）      PDF （175KB）（425）       Knowledge map    Reference | Related Articles | Metrics Select Distortion control of 17CrNiMo6 large heavy-duty inner gear ring during carburizing and quenching Yao Yajun, Luo Changzeng, Shi Juyan, Liang Wei HTM    2014, 39 (1): 137-140.   Abstract （326）      PDF （185KB）（305）       Knowledge map    Reference | Related Articles | Metrics Select Fracture failure analysis of 30CrMnSiA steel bolts Mu Yanjun, Yang Jun, Wen Hanyan HTM    2014, 39 (1): 141-143.   Abstract （365）      PDF （165KB）（289）       Knowledge map    Reference | Related Articles | Metrics Select Failure analysis on explosive welded composite plate Zhu Xiaohong, Lü Xinfeng, Chen Guoqi, JiangWei HTM    2014, 39 (1): 144-148.   Abstract （274）      PDF （334KB）（327）       Knowledge map    Reference | Related Articles | Metrics Select Failure analysis of 40Cr steel tool holder Li Haixia HTM    2014, 39 (1): 148-150.   Abstract （235）      PDF （377KB）（319）       Knowledge map    Related Articles | Metrics Select Parameters optimization design of the silicon steel casting blank induction heating furnace Tu Fuquan, Mao Yang, Zeng Qingbing HTM    2014, 39 (1): 151-153.   Abstract （259）      PDF （185KB）（224）       Knowledge map    Reference | Related Articles | Metrics Select Application of network technology on heat treatment equipments Zhang Zhipeng, Wu Yan HTM    2014, 39 (1): 154-158.   Abstract （290）      PDF （342KB）（335）       Knowledge map    Reference | Related Articles | Metrics Select Alloy design and performance test of a Cr-Mo-V nitriding steel Deng Chuanyin, Min Yong’an, Liao Jianxiong HTM    2014, 39 (2): 1-6.   Abstract （250）      PDF （275KB）（248）       Knowledge map    Reference | Related Articles | Metrics Select Hot ductility of boron microalloyed steel Q235B-2B Chen Qing, Xu Lijun, Pan Yifang, Qiu Shengtao, Lai Chaobin, Wang Chaoyang, Li Jin, Liu Wei HTM    2014, 39 (2): 7-11.   Abstract （278）      PDF （170KB）（221）       Knowledge map    Reference | Related Articles | Metrics Select Effect of La2O3 on recrystallization temperature of TZM alloy He Huancheng, Wang Kuaishe, Hu Ping, Kang Xuanqi, Wang Pengzhou, Liu Renzhi HTM    2014, 39 (2): 12-15.   Abstract （307）      PDF （162KB）（294）       Knowledge map    Reference | Related Articles | Metrics Select Effect of annealing treatment on hydrogen storage properties of (La0.8Nd0.2)2Mg(Ni0.8-xCo0.1Mn0.1Alx)9 alloys Huang Xiantun HTM    2014, 39 (2): 15-18.   Abstract （261）      PDF （161KB）（285）       Knowledge map    Reference | Related Articles | Metrics Select High-cycle fatigue property of high vanadium medium-carbon microalloyed steel Shao Chengwei, Chen Silian, Zhao Xiaoli, Hui Weijun, Cao Jianchun, Hao Yanying HTM    2014, 39 (2): 19-22.   Abstract （291）      PDF （169KB）（209）       Knowledge map    Related Articles | Metrics Select Preparation of Fe3Al intermetallic compound powder by mechanical alloying and heat treatment Liao Kai，Jie Xiaohua，Yao Yuan，Liu Ye HTM    2014, 39 (2): 23-25.   Abstract （240）      PDF （157KB）（265）       Knowledge map    Related Articles | Metrics Select Development of low C and Cr-containing J55 steel hot rolled coil Huang Minghao, Huang Guojian, Kong Xianglei HTM    2014, 39 (2): 26-29.   Abstract （272）      PDF （153KB）（232）       Knowledge map    Reference | Related Articles | Metrics Select Austenite grain growth behavior and hot ductility of non-quenched and tempered steel C38N2 for crankshaft Yang Zhong, Kou Yushan, Wang Hailong, Guo Junguo, Zhang Yandong, Liu Yazheng HTM    2014, 39 (2): 30-33.   Abstract （290）      PDF （172KB）（264）       Knowledge map    Reference | Related Articles | Metrics Select Effect of tempering on microstructure and mechanical properties of a vanadium-bearing ultra-high strength steel for pipeline Lu Chunjie, Zhao Wengui, Chen Meng, Qu Jinbo HTM    2014, 39 (2): 34-38.   Abstract （296）      PDF （168KB）（223）       Knowledge map    Related Articles | Metrics Select Microstructure and mechanical properties of rolled 7Cr17MoV stainless steel used for cutlery Yao Di, Li Jing, Li Jihui HTM    2014, 39 (2): 39-42.   Abstract （307）      PDF （166KB）（235）       Knowledge map    Related Articles | Metrics Select Effect of self-tempering temperature on microstructure and properties of high strength and corrosion resistant ship plate steel with Nb-microalloyed Wu Zhanfang, Xu Lijun, Wang Hong, Qiu Shengtao, Chen Yisheng HTM    2014, 39 (2): 43-46.   Abstract （262）      PDF （165KB）（241）       Knowledge map    Related Articles | Metrics Select Influence of heat input on microstructure and properties of welding coarse-grained zone of X80 pipeline steel Zhang Defen，Wang Jin，Jing Liang，Peng Bo，Jiang Ping HTM    2014, 39 (2): 47-50.   Abstract （272）      PDF （177KB）（161）       Knowledge map    Reference | Related Articles | Metrics Select Rolling contact fatigue performance of a new type bainitic frog steel He Lei, Luan Daocheng, Chen Xiaonan, Wang Yan, Xiong Wanquan HTM    2014, 39 (2): 51-54.   Abstract （250）      PDF （174KB）（237）       Knowledge map    Reference | Related Articles | Metrics Select Property comparison of several high speed steels used for taps Xu Heping, Xu Qiming, Chen Li, Wu Lizhi, Sun Zonglin, Song Ziyu, Chen Lun, Zheng Yuedong HTM    2014, 39 (2): 54-57.   Abstract （340）      PDF （175KB）（260）       Knowledge map    Reference | Related Articles | Metrics Select Comparison of crystallization and properties of elctroless plated Ni-W-P/Ni-P coatings Yao Hongli, Wang Houjie, Wang Shousheng, Zhao Zhongkun, Liu Hong HTM    2014, 39 (2): 58-64.   Abstract （273）      PDF （158KB）（252）       Knowledge map    Reference | Related Articles | Metrics Select Effect of nitrogen flow on microstructure and mechanical properties of (Ti, Al, Si, Cr)N superhard film Wang fang, Huang Weigang, Zhao Haibo HTM    2014, 39 (2): 65-68.   Abstract （534）      PDF （158KB）（223）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and bonding strength of NiAl coating prepared by subsonic and supersonic plasma sprayings on CuCrZr alloy Chen Jian, Ma Wanbin HTM    2014, 39 (2): 68-71.   Abstract （275）      PDF （149KB）（153）       Knowledge map    Reference | Related Articles | Metrics Select Residual stress analysis and wear resistance of WC particle reinforcedNi-based coating Guo Huafeng, Li Juli, Sun Tao, Yang Haifeng HTM    2014, 39 (2): 72-76.   Abstract （294）      PDF （167KB）（144）       Knowledge map    Related Articles | Metrics Select Laser cladding of tungsten-free low carbon moderate cobalt alloy powder on nuclear valve sealing surface Jin Kunwen, Li Biwen, Cheng Qiang, Hu Xiyun, Chen Airui HTM    2014, 39 (2): 77-81.   Abstract （317）      PDF （173KB）（175）       Knowledge map    Reference | Related Articles | Metrics Select Compound surface strengthening of hot working dies by shot peening and multi-element nitrocarburizing Yu Yingyan, Zhou Jie, Li Mengyao, Gao Lin HTM    2014, 39 (2): 81-84.   Abstract （248）      PDF （184KB）（243）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and mechanical properties of G302 alloy powder clad coating by flame spray Shi Haifang，Zhou Songran，Zhou Yuming HTM    2014, 39 (2): 85-87.   Abstract （266）      PDF （170KB）（224）       Knowledge map    Reference | Related Articles | Metrics Select Effect of aging treatment on grain refinement and superplasticity of 2A97 aluminum-lithium alloy Zhang Xinming, Xie Lei, Ye Lingying, Zhang Pan HTM    2014, 39 (2): 88-93.   Abstract （281）      PDF （177KB）（240）       Knowledge map    Related Articles | Metrics Select Effect of controlled cooling process on microstructure of 20G boiler steel Zhang Yiwei, Yuan Xiaomin, Zheng Zhen HTM    2014, 39 (2): 93-96.   Abstract （270）      PDF （169KB）（214）       Knowledge map    Reference | Related Articles | Metrics Select Influence of heat treatment on microstructure and mechanical properties of WCp/B4Cp/6063Al composite Ma Shuwang, Gan Bin, Yang Jian, Liu Kun, Liang Qiushi, Mao Changhui, Du Jun HTM    2014, 39 (2): 97-100.   Abstract （277）      PDF （159KB）（124）       Knowledge map    Related Articles | Metrics Select Determination of steady-state deformation parameters for 42CrMo steel based on casting-rolling compound forming Qin Fangcheng，Qi Huiping，Li Yongtang，Du Shiwen HTM    2014, 39 (2): 101-106.   Abstract （257）      PDF （161KB）（220）       Knowledge map    Reference | Related Articles | Metrics Select A constitutive description for hot flow behavior of 3Cr20Ni10W2 alloy Lin Hong HTM    2014, 39 (2): 107-111.   Abstract （253）      PDF （168KB）（274）       Knowledge map    Related Articles | Metrics Select Effect of water toughening on microstructure and mechanical properties of high manganese steel casting Zheng Honghong，Zhao Aimin，Cao Jiali，Geng Zhida HTM    2014, 39 (2): 112-115.   Abstract （246）      PDF （176KB）（219）       Knowledge map    Related Articles | Metrics Select Optimization of QPQ process parameters of 65Mn steel forimproving its wear resistance Guo Jie, Liu Liguo, Meng Guoqing, Wang Ruoheng HTM    2014, 39 (2): 116-120.   Abstract （285）      PDF （157KB）（233）       Knowledge map    Related Articles | Metrics Select Effect of high pressure heat treatment on hardness and compressive property of Cu52Cr48 alloy Wang Shuying HTM    2014, 39 (2): 120-122.   Abstract （298）      PDF （170KB）（211）       Knowledge map    Related Articles | Metrics Select Effect of annealing process on microstructure and wear resistance of AZ31 magnesium alloy Wang Menghan, Xian Guocai, Wang Yanli HTM    2014, 39 (2): 123-124.   Abstract （249）      PDF （164KB）（202）       Knowledge map    Related Articles | Metrics Select Accurate numerical simulation of quenching process of 18CrNiMo7-6 gear steel Huang Qunchao, Lu Wenzhuang, Li Pengcheng, Zuo Dunwen, Ding Sheng, Xu Renwei, Jiang Wenge HTM    2014, 39 (2): 125-128.   Abstract （336）      PDF （188KB）（243）       Knowledge map    Related Articles | Metrics Select Effect of part’s shape on temperature field distribution during induction heating Zhu Ye, Zhang Genyuan HTM    2014, 39 (2): 129-132.   Abstract （259）      PDF （174KB）（267）       Knowledge map    Reference | Related Articles | Metrics Select Control technology of transmission and tracking on steel plate heat treatment line Chen Jun HTM    2014, 39 (2): 133-138.   Abstract （253）      PDF （171KB）（254）       Knowledge map    Reference | Related Articles | Metrics Select Design and heat transfer calculation of composite lining of high temperature carburizing furnace Zong Guoliang, Chen Yankai, Fang Hua, Xu Shuangkai, Pu Xiaodong, Li Dongxia HTM    2014, 39 (2): 138-140.   Abstract （257）      PDF （213KB）（464）       Knowledge map    Related Articles | Metrics Select Failure analysis of steel screws Hu Chunyan, Jiang Tao, Liu Xinling HTM    2014, 39 (2): 141-144.   Abstract （290）      PDF （272KB）（265）       Knowledge map    Related Articles | Metrics Select Measurement of oxygen content in micro oxygen environment Li Xianqin, Ma Lu, Zhang Quanzheng HTM    2014, 39 (2): 145-146.   Abstract （492）      PDF （196KB）（218）       Knowledge map    Related Articles | Metrics Select Main changes of GB 15735—2012: Requirements for the safety and health in production process of metal heat treatment Wang Kaiyuan HTM    2014, 39 (2): 147-149.   Abstract （250）      PDF （160KB）（244）       Knowledge map    Reference | Related Articles | Metrics Select Effects of gradient diffusion and partitioning of carbon in SiMn steel on its microsctructure and mechanical properties Jiang Bozhi, Wang Fengying, Cao Shuo, Yao Yakun, Qiao Songjie, Zhou Huihua, Zhu Yuefeng HTM    2014, 39 (3): 1-6.   doi:10.13251/j.issn.0254-6051.2014.03.001 Abstract （367）      PDF （268KB）（401）       Knowledge map    Reference | Related Articles | Metrics Select Influencing factors of 60Si2Mn spring steel complete decarburization Wang Liping, Liu Yangbo, Zhang Wei, Tong Qian, Wang Lifeng HTM    2014, 39 (3): 7-12.   doi:10.13251/j.issn.0254-6051.2014.03.002 Abstract （317）      PDF （164KB）（275）       Knowledge map    Reference | Related Articles | Metrics Select Analysis of influencing factor on oxidation burning loss of billet in heating furnace with oxygen-enriched combustion Wang Naishuai, Wen Zhi, Lou Guofeng, Liu Lijun, Feng Xiaohong, Zhang Daoming HTM    2014, 39 (3): 13-17.   doi:10.13251/j.issn.0254-6051.2014.03.003 Abstract （321）      PDF （158KB）（485）       Knowledge map    Reference | Related Articles | Metrics Select Effects of heat treatment on microstructure and mechanical properties of a high strength steel with low yield ratio Yang Hao, Qu Jinbo HTM    2014, 39 (3): 18-22.   doi:10.13251/j.issn.0254-6051.2014.03.004 Abstract （380）      PDF （162KB）（193）       Knowledge map    Reference | Related Articles | Metrics Select Effects of cooling process on microstructure and properties of hot rolled ferrite-bainite dual-phase steel Zhang Liang, Zhao Zhengzhi, Feng Jinyu HTM    2014, 39 (3): 23-26.   doi:10.13251/j.issn.0254-6051.2014.03.005 Abstract （370）      PDF （161KB）（269）       Knowledge map    Reference | Related Articles | Metrics Select Influence of hydrothermal treatment on the phase of hydroxyapatite coating deposited by electrochemistry deposition Du Jiandi, Liu Xinkuan, He Daihua, Liu Ping, Ma Fengcang, Li Qin,Yu Zhongrui, Feng Ningning HTM    2014, 39 (3): 27-31.   doi:10.13251/j.issn.0254-6051.2014.03.006 Abstract （357）      PDF （166KB）（201）       Knowledge map    Reference | Related Articles | Metrics Select Effect of hot-press annealing on bond strength of hot rolled AZ31/L2 clad sheet Fu Xuesong, Liu Chengfang, Li Zhuang, Chen Guoqing, Sun Zhonggang, Zhou Wenlong HTM    2014, 39 (3): 31-35.   doi:10.13251/j.issn.0254-6051.2014.03.007 Abstract （335）      PDF （162KB）（335）       Knowledge map    Reference | Related Articles | Metrics Select Rolling process and bonding mechanism of micro-arc oxidation 6061 aluminium alloy clad plate Zheng Yi, Wu Guorui, Zhang Shengchao, Zhang Xueshu, Yang Meng HTM    2014, 39 (3): 36-40.   doi:10.13251/j.issn.0254-6051.2014.03.008 Abstract （352）      PDF （167KB）（191）       Knowledge map    Reference | Related Articles | Metrics Select Contact fatigue life of CL60 wheel steel after heat treatment Yi Yanliang, Liang Yilong, Wang Panzhi, Yang ming HTM    2014, 39 (3): 41-45.   doi:10.13251/j.issn.0254-6051.2014.03.009 Abstract （389）      PDF （190KB）（247）       Knowledge map    Reference | Related Articles | Metrics Select Effect of tempering on residual stress of hot rolled low carbon martensitic high-strength steel Sun Lin, Zhao Zhiyi, Lin Wei, Wang Yue HTM    2014, 39 (3): 45-48.   doi:10.13251/j.issn.0254-6051.2014.03.010 Abstract （330）      PDF （170KB）（233）       Knowledge map    Reference | Related Articles | Metrics Select Influence of tempering temperature on microstructure and mechanical properties of 22SiMnCrNi2Mo steel Liu Qun, Ou Meigui, Wang Pangzhi, Xiong Jiaze, Long Qian HTM    2014, 39 (3): 49-52.   doi:10.13251/j.issn.0254-6051.2014.03.011 Abstract （361）      PDF （168KB）（272）       Knowledge map    Reference | Related Articles | Metrics Select Effects of laser quenching pretreatment on microstructure and properties of 40Cr steel ion NCOS penetration layer Zhong Li, Wang Liwen, Yang Zaiqiang HTM    2014, 39 (3): 53-56.   doi:10.13251/j.issn.0254-6051.2014.03.012 Abstract （399）      PDF （169KB）（272）       Knowledge map    Reference | Related Articles | Metrics Select Effect of temperature on high temperature tensile deformation behavior of AZ80 magnesium alloy Liu Yunteng, Zhan Chengwei, Zhou Jixue, Tang Shouqiu, Jiang Likun HTM    2014, 39 (3): 57-60.   doi:10.13251/j.issn.0254-6051.2014.03.013 Abstract （426）      PDF （173KB）（351）       Knowledge map    Reference | Related Articles | Metrics Select Effect of controlled cooling process on microstructures and properties of carbide-free bainite/martensite steel with different Mo contents Han Zhenyu HTM    2014, 39 (3): 60-64.   doi:10.13251/j.issn.0254-6051.2014.03.014 Abstract （376）      PDF （174KB）（294）       Knowledge map    Reference | Related Articles | Metrics Select Effects of conventional heat treatment on oxygen-rich α layer and mechanical properties of TC4 alloy Hou Lihua, Wu Rui, Yu Hao, Zhu Jingchuan, Zhang Xiaoqing, Song Tijie, Zhou Yi HTM    2014, 39 (3): 65-68.   doi:10.13251/j.issn.0254-6051.2014.03.015 Abstract （348）      PDF （449KB）（546）       Knowledge map    Reference | Related Articles | Metrics Select Effect of cold deformation on tensile properties of 0Cr18Ni10Ti stainless steel tubes Li Hongyu, Zhang Luqiang, Liu Yang, Dong Pu, Yi Nan, Liu Ming, Zhao Honglei HTM    2014, 39 (3): 69-71.   doi:10.13251/j.issn.0254-6051.2014.03.016 Abstract （324）      PDF （163KB）（288）       Knowledge map    Reference | Related Articles | Metrics Select Controlled cooling process optimization of H08A wire rod used for welding Li Ronghua, Li Yichang, Fan Yi, Zhao Rulong, Wang Hongli HTM    2014, 39 (3): 72-75.   doi:10.13251/j.issn.0254-6051.2014.03.017 Abstract （330）      PDF （167KB）（237）       Knowledge map    Reference | Related Articles | Metrics Select Effects of welding current on microstructure and elements diffusion of Ti3Al/Ti alloy weld seam Kang Yan HTM    2014, 39 (3): 75-77.   doi:10.13251/j.issn.0254-6051.2014.03.018 Abstract （326）      PDF （154KB）（169）       Knowledge map    Reference | Related Articles | Metrics Select Heating specification before forging test of 9Cr18 steel forging Ye Yujuan, Gao Quande, Meng Xiangshun, Wang Dengke, Chen Wei, Wang Lixin HTM    2014, 39 (3): 78-80.   doi:10.13251/j.issn.0254-6051.2014.03.019 Abstract （355）      PDF （181KB）（268）       Knowledge map    Reference | Related Articles | Metrics Select Effect of keyway tail structure on induction quenching quality of shaft parts Kong Chunhua, Mao Chang’en, Xue Qing, Ma Ge, Liu Jinying HTM    2014, 39 (3): 80-82.   doi:10.13251/j.issn.0254-6051.2014.03.020 Abstract （567）      PDF （283KB）（182）       Knowledge map    Reference | Related Articles | Metrics Select Ferrite transformation kinetics of X 70 pipeline steel during continuous cooling Xie Baosheng, Cai Qingwu, Yu Wei, Cao Jiaming, Yang Yunfeng HTM    2014, 39 (3): 83-88.   doi:10.13251/j.issn.0254-6051.2014.03.021 Abstract （334）      PDF （184KB）（301）       Knowledge map    Reference | Related Articles | Metrics Select Continuous cooling transformation and isothermal transformation of supercooled austenite for AH80DB low carbon bainitic steel Zhang Jianping, Wang Fuming, Zeng Qiangguo, Liu Bin HTM    2014, 39 (3): 89-93.   doi:10.13251/j.issn.0254-6051.2014.03.022 Abstract （348）      PDF （160KB）（304）       Knowledge map    Reference | Related Articles | Metrics Select Research status on cryogenic treatment mechanism of high speed steel Ai Zhengrong, Wu Hongyan, Gao Haitao, Liu Xianghua HTM    2014, 39 (3): 94-98.   doi:10.13251/j.issn.0254-6051.2014.03.023 Abstract （323）      PDF （178KB）（289）       Knowledge map    Reference | Related Articles | Metrics Select Phase transformation and microstructure evolution of GCr15 steel during continuous cooling Zhang Xiaolei, Li Hui, Xu Shixin, Li Zhichao, Mi Zhenli HTM    2014, 39 (3): 99-102.   doi:10.13251/j.issn.0254-6051.2014.03.024 Abstract （291）      PDF （167KB）（282）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and properties of Cr8Mo2SiV and Cr12Mo1V1 steel with different section size Zeng Fen, Chi Hongxiao, Ma Dangshen, Ma Youping, Xu Huixia, Zhu Wanglong HTM    2014, 39 (3): 102-107.   doi:10.13251/j.issn.0254-6051.2014.03.000 Abstract （516）      PDF （173KB）（412）       Knowledge map    Related Articles | Metrics Select Phase and properties of HA/TiO2 composite coating deposited by Hydrothermal-electrochemical deposition Li Qin , Liu Ping, He Daihua, Liu Xinkuan, Ma Fengcang, Du Jiandi, Feng Ningning HTM    2014, 39 (3): 108-112.   doi:10.13251/j.issn.0254-6051.2014.03.000 Abstract （248）      PDF （164KB）（310）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and properties of cast steel matrix of die surfacing after forging Li Mengyao, Zhou Jie, Yu Yingyan, Lu Shun, Bi Huan HTM    2014, 39 (3): 113-116.   doi:10.13251/j.issn.0254-6051.2014.03.027 Abstract （240）      PDF （172KB）（293）       Knowledge map    Reference | Related Articles | Metrics Select Effect of TiB2 content on electrical erosion resistance of dispersion strengthened TiB2/Cu composite material Li Hongxia, Wang Guoqiang, Song Kexing, Zhang Yanmin, Guo Xiuhua HTM    2014, 39 (3): 116-119.   doi:10.13251/j.issn.0254-6051.2014.03.028 Abstract （229）      PDF （184KB）（256）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and properties of remelting layer of Fe based Fe55 powder with WC adding Shi Haifang, Bai Yu, Zhang Bo, Fu Liping HTM    2014, 39 (3): 120-122.   doi:10.13251/j.issn.0254-6051.2014.03.029 Abstract （301）      PDF （169KB）（241）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and distortion of Cr12MoV steel bush after high temperature quenching and tempering Wang Hongwei, Zhang Xudong, Gu Min, Zhao Shaofu, Li Shuangxi HTM    2014, 39 (3): 123-126.   doi:10.13251/j.issn.0254-6051.2014.03.030 Abstract （338）      PDF （173KB）（303）       Knowledge map    Reference | Related Articles | Metrics Select Research on precipitate hardening effect of 14MnMoV steel Zuo Chuanfu, Meng Yafeng, Wang Zhihong,Tang Feng HTM    2014, 39 (3): 126-129.   doi:10.13251/j.issn.0254-6051.2014.03.031 Abstract （342）      PDF （163KB）（232）       Knowledge map    Related Articles | Metrics Select Numerical simulation of quenching process of a new Al-Zn-Mg-Cu high strength aluminum alloy thick plate Wang Jinliang, Liu Jiachen, Chen Huiqin HTM    2014, 39 (3): 130-133.   doi:10.13251/j.issn.0254-6051.2014.03.032 Abstract （368）      PDF （174KB）（305）       Knowledge map    Related Articles | Metrics Select Flow field uniformity of gas circulating mesh belt type tempering furnace Zheng Ji, Zhang Hailiang, Luo Huan HTM    2014, 39 (3): 134-137.   doi:10.13251/j.issn.0254-6051.2014.03.033 Abstract （314）      PDF （174KB）（312）       Knowledge map    Reference | Related Articles | Metrics Select Research on temperature field of door beam during hot stamping Ye Yongsheng, Shan Zhongde, Wang Baoyu, Jiang Chao, Zhuang Bailiang HTM    2014, 39 (3): 138-141.   doi:10.13251/j.issn.0254-6051.2014.03.034 Abstract （332）      PDF （168KB）（230）       Knowledge map    Related Articles | Metrics Select Fretting wear behavior of 35CrMo steel under gross slip condition Wang Panzhi, Liang Yilong, Song Hongchao, Yi Yanliang HTM    2014, 39 (3): 141-144.   doi:10.13251/j.issn.0254-6051.2014.03.035 Abstract （316）      PDF （184KB）（388）       Knowledge map    Related Articles | Metrics Select Face grind-hardening effect prediction based on support vector machine Ji Huifu, Liu Songyong, Zheng Jiaqiang HTM    2014, 39 (3): 145-147.   doi:10.13251/j.issn.0254-6051.2014.03.036 Abstract （319）      PDF （183KB）（273）       Knowledge map    Related Articles | Metrics Select Analysis of plating leakage of the galvanealed steel strip Fu Ying, Teng Huaxiang, Li Shengci, Wang Chuan, Kang Yonglin HTM    2014, 39 (3): 148-151.   doi:10.13251/j.issn.0254-6051.2014.03.037 Abstract （319）      PDF （189KB）（267）       Knowledge map    Related Articles | Metrics Select Fracture failure analysis of drill pipe thread joint Li Fangpo, Chen Changqing, Liu Yonggang, Wang Qingli, Li Qifu HTM    2014, 39 (3): 152-156.   doi:10.13251/j.issn.0254-6051.2014.03.038 Abstract （555）      PDF （180KB）（325）       Knowledge map    Related Articles | Metrics Select Fracture failure analysis of SS7E electric locomotive link pin Li Aijiao HTM    2014, 39 (3): 156-157.   doi:10.13251/j.issn.0254-6051.2014.03.039 Abstract （360）      PDF （269KB）（279）       Knowledge map    Reference | Related Articles | Metrics Select Development trend of surface integrity and anti-fatigue manufacture of gears Gao Yukui, Zhao Zhenye HTM    2014, 39 (4): 1-6.   doi:10.13251/j.issn.0254-6051.2014.04.001 Abstract （660）      PDF （283KB）（529）       Knowledge map    Related Articles | Metrics Select Status and development of remelting technology of layers Ma Zhuang, Tao Ying, Zhou Peng, Li Zhichao HTM    2014, 39 (4): 7-10.   doi:10.13251/j.issn.0254-6051.2014.04.002 Abstract （365）      PDF （174KB）（367）       Knowledge map    Related Articles | Metrics Select The effect of PyC coating on thermal expansion behavior of Cf/Al composites Zhou Yuanbiao, Guo Lingjun, Qi Lehua, Ma Yuqin, Zheng Wuqiang HTM    2014, 39 (4): 11-15.   doi:10.13251/j.issn.0254-6051.2014.04.003 Abstract （363）      PDF （166KB）（245）       Knowledge map    Reference | Related Articles | Metrics Select Effect of repeat solution treatment on properties of cast maraging stainless steels for cryogenic applications SuWenwen, Yang Zhuoyue, Ding Yali HTM    2014, 39 (4): 15-18.   doi:10.13251/j.issn.0254-6051.2014.04.004 Abstract （408）      PDF （145KB）（500）       Knowledge map    Related Articles | Metrics Select Precipitation strengthening of nano-sized carbides in Ti micro-alloyed steel Wang Xiaopei, Zhao Aimin, Zhao Zhengzhi, Huang Yao, Li Liang HTM    2014, 39 (4): 19-22.   doi:10.13251/j.issn.0254-6051.2014.04.005 Abstract （327）      PDF （150KB）（283）       Knowledge map    Related Articles | Metrics Select Effect of Cr on microstructure and austenite-ferrite transformation temperature of low carton steel Li Huicheng, Chen Shuying, Yue Xudong, Yang Hongming HTM    2014, 39 (4): 22-25.   doi:10.13251j.issn.0254-6051.2014.04.006 Abstract （367）      PDF （151KB）（294）       Knowledge map    Related Articles | Metrics Select Influence of preoxidation on galvanizability of the third generation automotive steel Feng Shijie, Jiang Sheming,Li Yuanpeng, Li Zhenhua,Yuan Xunhua, Zhang Qifu HTM    2014, 39 (4): 26-30.   doi:10.13251j.issn.0254-6051.2014.04.007 Abstract （316）      PDF （160KB）（352）       Knowledge map    Related Articles | Metrics Select Microstructure and corrosion characterization of hot dip Zn-Al-Mg coated steel Lin Yuan, Yuan Xunhua, Yue Chongfeng, Jiang Sheming, Li Zhenhua, Zhang Qifu HTM    2014, 39 (4): 31-36.   doi:10.13251j.issn.0254-6051.2014.04.008 Abstract （437）      PDF （162KB）（363）       Knowledge map    Reference | Related Articles | Metrics Select Processing quality analysis of the surface induction quenched domestic 55 steel and Japanese S55C steel screw polished rods Yan Ye, Wang Qian, Li Bo, Li Baomin, Dong Qingxin, Li Musen HTM    2014, 39 (4): 37-40.   doi:10.13251/j.issn.0254-6051.2014.04.009 Abstract （495）      PDF （166KB）（311）       Knowledge map    Reference | Related Articles | Metrics Select Preparation of dense thin Al2O3 film on Fe-Cr-Al alloy fibers Li Guangzhong, Li Gang, Tang Huiping, Zhang Wenyan, Wang Jianzhong, Ma Jun HTM    2014, 39 (4): 41-44.   doi:10.13251j.issn.0254-6051.2014.04.010 Abstract （324）      PDF （175KB）（283）       Knowledge map    Related Articles | Metrics Select Effect of heating temperature on scale of W470 high-silicon steel continuous casting billet Ding Meiliang, Ding Bo, Guan Jianhui HTM    2014, 39 (4): 45-48.   doi:10.13251j.issn.0254-6051.2014.04.011 Abstract （354）      PDF （157KB）（189）       Knowledge map    Reference | Related Articles | Metrics Select CCT curve of X100 pipeline steel Liu Shouxian, Jin Fangfang, Li Junzheng HTM    2014, 39 (4): 49-52.   doi:10.13251j.issn.0254-6051.2014.04.012 Abstract （319）      PDF （153KB）（262）       Knowledge map    Related Articles | Metrics Select Corrosion behavior of AZ91 magnesium alloy for automobile engine Huang Jian HTM    2014, 39 (4): 52-55.   doi:10.13251/j.issn.0254-6051.2014.04.013 Abstract （374）      PDF （173KB）（484）       Knowledge map    Related Articles | Metrics Select Microstructure and mechanical properties of continuous cold rolling strip steel welded joint Dong Rui, Zhao Aimin, Li Zhen, Cheng Junye, Zhao Fuqing, Ding Ran HTM    2014, 39 (4): 56-59.   doi:10.13251/j.issn.0254-6051.2014.04.014 Abstract （346）      PDF （169KB）（276）       Knowledge map    Related Articles | Metrics Select Microstructure and mechanical properties of AZ31B Mg alloy wide sheets Huang Zhanghong, Dang Peng, Fu Wenjie, Wu Xiaodong, Liao Qiang, Ju Jianhui HTM    2014, 39 (4): 60-62.   doi:10.13251/j.issn.0254-6051.2014.04.015 Abstract （383）      PDF （180KB）（257）       Knowledge map    Related Articles | Metrics Select Effect of welding process on microstructure and hardness of ultra-fine grained steel SS400 welded joint Bai Qingwei, Ma Yonglin, Xing Shuqing, Chen Zhongyi, Lu Hengchang HTM    2014, 39 (4): 63-68.   doi:10.13251/j.issn.0254-6051.2014.04.016 Abstract （537）      PDF （176KB）（387）       Knowledge map    Related Articles | Metrics Select Effect of temperature on microstructure of GCr15 bearing steel in low-temperature rolling Chao Yuelin, Deng Suhuai, Wang Liping, Zheng Fuyin HTM    2014, 39 (4): 68-71.   doi:10.13251/j.issn.0254-6051.2014.04.017 Abstract （384）      PDF （171KB）（326）       Knowledge map    Related Articles | Metrics Select Effect of tempering temperature on microstructure and mechanical properties of Q690 steel queched under different cooling rates Wang Dongxue, Cai Qingwu HTM    2014, 39 (4): 72-75.   doi:10.13251j.issn.0254-6051.2014.04.018 Abstract （636）      PDF （166KB）（226）       Knowledge map    Related Articles | Metrics Select Effect of overaging treatment on microstructure and properties of ultra high strength martensite steel sheet Meng Qingge, Li Jun, Xu Dechao HTM    2014, 39 (4): 76-80.   doi:10.13251/j.issn.0254-6051.2014.04.019 Abstract （336）      PDF （163KB）（287）       Knowledge map    Related Articles | Metrics Select Effects of niobium content on annealing recrystallization microstructure and mechanical properties of cold rolling steel Ding Zhilong, Si Songhua HTM    2014, 39 (4): 81-84.   doi:10.13251/j.issn.0254-6051.2014.04.020 Abstract （339）      PDF （164KB）（238）       Knowledge map    Reference | Related Articles | Metrics Select Effect of quenching process on microstructure and mechanical properties of BR1500HS ultra-high strength boron steel plate Wang Menghan, Wang Yanli, Xian Guocai HTM    2014, 39 (4): 84-87.   doi:10.13251/j.issn.0254-6051.2014.04.021 Abstract （429）      PDF （166KB）（287）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and mechanical properties of GH4169 superalloy welded joint Yu Lingfeng, Liang Yu, Zhou Lei HTM    2014, 39 (4): 88-91.   doi:10.13251/j.issn.0254-6051.2014.04.022 Abstract （429）      PDF （172KB）（374）       Knowledge map    Related Articles | Metrics Select Effects of welding current on microstructure and properties of 2A12 aluminum alloy welded joint Meng Yuanyuan, Ren Ruichen, Zhang Qianwei, Qin Haifeng, Meng Yawen HTM    2014, 39 (4): 92-94.   doi:10.13251j.issn.0254-6051.2014.04.023 Abstract （360）      PDF （186KB）（214）       Knowledge map    Related Articles | Metrics Select Effect of forced air cooling rate on microstructure and mechanical properties of 70 steel wire Li Xin, Liang Yilong, Liang Yu, Wei Zemin HTM    2014, 39 (4): 95-97.   doi:10.13251/j.issn.0254-6051.2014.04.024 Abstract （348）      PDF （180KB）（310）       Knowledge map    Related Articles | Metrics Select Microstructure and mechanical properties of Fe-40Ni-Ti alloy Zhang Xiaojuan, Zhang Litao, Yuan Shaoqiang, Li Jing HTM    2014, 39 (4): 98-100.   doi:10.13251j.issn.0254-6051.2014.04.025 Abstract （328）      PDF （178KB）（285）       Knowledge map    Related Articles | Metrics Select Effect of heating time on corrosion resistance of Ni-base alloy coating prepared by high-frequency induction cladding Zhou Xinxing, Lin Chen, Liu Fang-qiang HTM    2014, 39 (4): 101-103.   doi:10.13251/j.issn.0254-6051.2014.04.026 Abstract （364）      PDF （179KB）（390）       Knowledge map    Related Articles | Metrics Select Effect of cryogenic treatment on compressive properties of ZQAl10-4-4 aluminum bronze Zhang Ronghua HTM    2014, 39 (4): 104-105.   doi:10.13251/j.issn.0254-6051.2014.03.027 Abstract （412）      PDF （155KB）（277）       Knowledge map    Related Articles | Metrics Select Effect of quenching process on microstructure of 30MnSi steel bar Zhang Feipeng, Yang Huan, Wang Xinlian, Dong Haipeng, Zhao Shixian HTM    2014, 39 (4): 106-109.   doi:10.13251/j.issn.0254-6051.2014.03.028 Abstract （452）      PDF （175KB）（373）       Knowledge map    Related Articles | Metrics Select Simulation for billet heating process in furnace with oxygen-enriched combustion Wang Naishuai, Wen Zhi, Su Fuyong, Li Zhi, Feng Xiaohong, Zhang Daoming HTM    2014, 39 (4): 110-115.   doi:10.13251/j.issn.0254-6051.2014.04.029 Abstract （458）      PDF （180KB）（305）       Knowledge map    Reference | Related Articles | Metrics Select Effect of uneven temperature distribution on carbon concentration field in gas carburizing Zhu Jingwen, Liao Ridong HTM    2014, 39 (4): 116-120.   doi:10.13251/j.issn.0254-6051.2014.04.030 Abstract （364）      PDF （161KB）（246）       Knowledge map    Reference | Related Articles | Metrics Select Transient heat transfer characteristics of cooling high temperature steel plate by single round jet impingement Zhou Gang, Wen Zhi, Dou Ruifeng, Liu Siqiang, Li Zhi, Feng Xiaohong HTM    2014, 39 (4): 121-125.   doi:10.13251/j.issn.0254-6051.2014.04.031 Abstract （387）      PDF （182KB）（286）       Knowledge map    Reference | Related Articles | Metrics Select Heat treatment process of SKT4 mold steel after forging Liu Shaoyou, Ye Xicong, Chen Shihua, Xiong Changshou, He Jianwu, Pan Zong HTM    2014, 39 (4): 126-128.   doi:10.13251/j.issn.0254-6051.2014.04.032 Abstract （460）      PDF （175KB）（289）       Knowledge map    Related Articles | Metrics Select Cyclic strain hardening characteristics of 300M steel after surface strengthening Lu Guoxin, Wang Renzhi, Lu Feng HTM    2014, 39 (4): 129-131.   doi:10.13251j.issn.0254-6051.2014.04.033 Abstract （337）      PDF （182KB）（234）       Knowledge map    Reference | Related Articles | Metrics Select Application of PVD technology in ice skate blade Mi Jing HTM    2014, 39 (4): 132-134.   doi:10.13251/j.issn.0254-6051.2014.04.034 Abstract （370）      PDF （181KB）（295）       Knowledge map    Related Articles | Metrics Select Failure analysis on GCr15 steel nuts of precision ball screw pair Gai Yuhong, Ding Xia, Li Baomin, Du Wei, Li Musen HTM    2014, 39 (4): 135-137.   doi:10.13251j.issn.0254-6051.2014.04.035 Abstract （419）      PDF （188KB）（537）       Knowledge map    Related Articles | Metrics Select Fracture failure analysis of fore tank bottom weld seam Kong Huanping, Yu Lei, Liu Changkui, Liu Delin, Jiang Tao, HTM    2014, 39 (4): 138-141.   doi:10.13251/j.issn.0254-6051.2014.04.036 Abstract （366）      PDF （177KB）（286）       Knowledge map    Related Articles | Metrics Select Analysis on cold-rolling cracking reason of 45 steel tube Ding Ye,Sun Weilian,Zhang Yunqian,Sun Bo HTM    2014, 39 (4): 142-144.   doi:10.13251j.issn.0254-6051.2014.04.037 Abstract （346）      PDF （324KB）（307）       Knowledge map    Related Articles | Metrics Select Formation cause and improving measure of grinding crack of roller Peng Yuhua, Zhang Min HTM    2014, 39 (4): 145-147.   doi:10.13251/j.issn.0254-6051.2014.04.038 Abstract （351）      PDF （179KB）（399）       Knowledge map    Reference | Related Articles | Metrics Select Failure analysis of 1Cr18Ni9Ti motor end ring Cheng Zhihui, Wang Feng, Zhang Xiangdong HTM    2014, 39 (4): 148-152.   doi:10.13251/j.issn.0254-6051.2014.04.039 Abstract （344）      PDF （294KB）（277）       Knowledge map    Reference | Related Articles | Metrics Select Analysis on quenching oxidation and test validation of workpiece in a controlled atmosphere box-type furnace Sun Bingchao, Wang Huijun, Zhou Jiupeng HTM    2014, 39 (4): 153-155.   doi:10.13251j.issn.0254-6051.2014.04.040 Abstract （289）      PDF （265KB）（281）       Knowledge map    Related Articles | Metrics Select China roadmap of heat treatment & surface modification technology HTM    2014, 39 (4): 156-160.   Abstract （455）      PDF （264KB）（213）       Knowledge map    Reference | Related Articles | Metrics Select Behavior of retained austenite in super bainite steel Wu Hua, Liang Yan, Zhang Cuicui, Liu Yunxu HTM    2014, 39 (5): 1-5.   doi:10.13251/j.issn.0254-6051.2014.05.001 Abstract （363）      PDF （267KB）（349）       Knowledge map    Reference | Related Articles | Metrics Select Dynamic continuous cooling transformation of EQ70 steel for offshore platform Gou Xue, Wang Fuming, Sun Lefei, Tao Sufen, Zhang Jianping HTM    2014, 39 (5): 6-9.   doi:10.13251/j.issn.0254-6051.2014.05.002 Abstract （306）      PDF （161KB）（396）       Knowledge map    Reference | Related Articles | Metrics Select Effect of tempering temperature on microstructure and mechanical properties of TMCP high strength steel Tong Mingwei, Yuan Zexi, Zhang Kaiguang HTM    2014, 39 (5): 10-13.   doi:10.13251/j.issn.0254-6051.2014.05.003 Abstract （307）      PDF （165KB）（278）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and mechanical properties of welded joint for F690 heavy shipbuilding plate Cheng Binggui, Luo Mi, Liu Dongsheng HTM    2014, 39 (5): 14-17.   doi:10.13251/j.issn.0254-6051.2014.05.004 Abstract （315）      PDF （159KB）（307）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and properties of welded joint of high strength steel for automobiles Ban Xiaodong HTM    2014, 39 (5): 18-21.   doi:10.13251/j.issn.0254-6051.2014.05.005 Abstract （391）      PDF （155KB）（1756）       Knowledge map    Reference | Related Articles | Metrics Select Variation of microstructure and mechanical properties of SWRS82B wire rod during cold drawing Yang Feng, Sun Yuling HTM    2014, 39 (5): 22-26.   doi:10.13251/j.issn.0254-6051.2014.05.006 Abstract （353）      PDF （157KB）（300）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and precipitation behavior of X80 pipeline steel relaxed after deformation Hou Jingli, Wang Haiyan, Ren Huiping, Liu Zongchang, Hou Jingchun HTM    2014, 39 (5): 27-30.   doi:10.13251/j.issn.0254-6051.2014.05.007 Abstract （275）      PDF （172KB）（282）       Knowledge map    Reference | Related Articles | Metrics Select Solid solution and deformation microstructure of 2A14 aluminum alloy Ye Mao, Meng Fuxin, Jiang Feng, Ao Hongfeng, Qi Gang, Chen Tiying, Wang Shuqing, Hu Wanting, Gao Zhiyong, Meng Xianglong HTM    2014, 39 (5): 31-35.   doi:10.13251/j.issn.0254-6051.2014.05.008 Abstract （314）      PDF （161KB）（326）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure of double-step hot-dipped Galfan coating on steel wire Li Pengtao, Zhi Yukun, Luo Xian, Li Xiaoyu, Kang Xianzhi HTM    2014, 39 (5): 36-39.   doi:10.13251/j.issn.0254-6051.2014.05.009 Abstract （298）      PDF （169KB）（268）       Knowledge map    Reference | Related Articles | Metrics Select Effect of hot rolled microstructural morphology on carbides of bearing steel after final heat treatment Deng Suhuai, Wang Yuanfang, Zhang Huifeng, Yang Zisen HTM    2014, 39 (5): 40-43.   doi:10.13251/j.issn.0254-6051.2014.05.010 Abstract （340）      PDF （169KB）（385）       Knowledge map    Reference | Related Articles | Metrics Select Hot corrosion behavior of high velocity arc sprayed FeCrNiB/Cr3C2 coating Shen Wei, Wu Yuping, Qian Ling, Guo Wenmin, Chen Liyan, Guo Ji HTM    2014, 39 (5): 44-46.   doi:10.13251/j.issn.0254-6051.2014.05.011 Abstract （289）      PDF （165KB）（322）       Knowledge map    Reference | Related Articles | Metrics Select Effect of Nb content on hardenability of 20CrMnTi steel Liu Yangbo, Cui Jingyu, Tong Qian, Wang Lifeng HTM    2014, 39 (5): 47-50.   doi:10.13251/j.issn.0254-6051.2014.05.012 Abstract （275）      PDF （165KB）（244）       Knowledge map    Reference | Related Articles | Metrics Select Phase constituents and formation mechanism of in-situ SiC coatings on carbon/carbon composites Cao Ning, Liu Minglei, Li Musen HTM    2014, 39 (5): 51-53.   doi:10.13251/j.issn.0254-6051.2014.05.013 Abstract （275）      PDF （178KB）（158）       Knowledge map    Reference | Related Articles | Metrics Select Effect of Nb microalloying on austenitic grain growth of high carbon steel Cheng Sihua, Zhou De, Kong Xiangtao, Wang Lifeng, Wu Di HTM    2014, 39 (5): 54-57.   doi:10.13251/j.issn.0254-6051.2014.05.014 Abstract （262）      PDF （179KB）（173）       Knowledge map    Reference | Related Articles | Metrics Select Effect of Nb and V contents on microstructure of carbide reinforced indefinite chilled rolls Huang Genzhe, Shi Dongsheng, Zhang Luyang, Li Qing HTM    2014, 39 (5): 58-63.   doi:10.13251/j.issn.0254-6051.2014.05.015 Abstract （244）      PDF （173KB）（506）       Knowledge map    Reference | Related Articles | Metrics Select Effect of chromium content on thermodynamics equilibrium phases of 55SiCr steel Song Tao, Cheng Yonggang, Xie Weian, Guo Yong HTM    2014, 39 (5): 63-65.   doi:10.13251/j.issn.0254-6051.2014.05.016 Abstract （289）      PDF （128KB）（350）       Knowledge map    Reference | Related Articles | Metrics Select Effect of B4C content on wear resistance of argon arc clad layer with in situ reactive alloy powder Ma Zhuang, Tan Shihai HTM    2014, 39 (5): 66-69.   doi:10.13251/j.issn.0254-6051.2014.05.017 Abstract （522）      PDF （164KB）（238）       Knowledge map    Reference | Related Articles | Metrics Select Effects of aging treatment on microstructure and mechanical properties of a new-type aluminum-lithium alloy Fu Xiaoqiang, Ma Chao, Bao Pengli, Chen Jie, Sun Zhonggang HTM    2014, 39 (5): 70-73.   doi:10.13251/j.issn.0254-6051.2014.05.018 Abstract （313）      PDF （164KB）（247）       Knowledge map    Reference | Related Articles | Metrics Select Effects of extrusion speed on mechanical properties of 7003 aluminum alloy by D-ECAP Lu Pingping, Shi Qingnan, Tang Guangbo, Jiang Yi HTM    2014, 39 (5): 74-76.   doi:10.13251/j.issn.0254-6051.2014.05.019 Abstract （317）      PDF （147KB）（237）       Knowledge map    Reference | Related Articles | Metrics Select Effects of heat treatment on microstructure and mechanical properties of 15-5PH stainless steel Qiu Zhen’an, Wang Haitao, Li Jiliang, Wei Wei, Sheng Xiaolong HTM    2014, 39 (5): 77-81.   doi:10.13251/j.issn.0254-6051.2014.05.020 Abstract （385）      PDF （166KB）（351）       Knowledge map    Reference | Related Articles | Metrics Select Influence of total rolling compression ratio and annealing process on low temperature superplasticity of 5083 aluminum alloy Liu Shoufa, Cai Yun, Wu Songlin HTM    2014, 39 (5): 82-84.   doi:10.13251/j.issn.0254-6051.2014.05.021 Abstract （286）      PDF （165KB）（273）       Knowledge map    Reference | Related Articles | Metrics Select Influence of solution treatment cooling ways on microstructure and corrosion resistance of AM50 magnesium alloy Sun Bei, Yang Miao, Zhang Zhiyi, Jiang Shuxiang HTM    2014, 39 (5): 85-90.   doi:10.13251/j.issn.0254-6051.2014.05.022 Abstract （284）      PDF （159KB）（303）       Knowledge map    Reference | Related Articles | Metrics Select Heat treatment process of 30MnCr22 steel pipe used in air conditioning system Feng Chun HTM    2014, 39 (5): 90-93.   doi:10.13251/j.issn.0254-6051.2014.05.023 Abstract （307）      PDF （156KB）（267）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and properties of fire-resistant steel for high rise building Liu Chengpeng, Mou Hongzhong HTM    2014, 39 (5): 94-97.   doi:10.13251/j.issn.0254-6051.2014.05.024 Abstract （337）      PDF （170KB）（262）       Knowledge map    Reference | Related Articles | Metrics Select Effects of quenching and self-tempering on mechanical properties of seismic reinforcement steel Peng Qing, He Yuejuan; Zhang Wei; Zhou Xisheng HTM    2014, 39 (5): 98-100.   doi:10.13251/j.issn.0254-6051.2014.05.025 Abstract （293）      PDF （172KB）（228）       Knowledge map    Reference | Related Articles | Metrics Select Surface laser hardening of punch head Liang Rong, Chang Xiaohui, Xie Wei, Dong Fengdan HTM    2014, 39 (5): 101-103.   doi:10.13251/j.issn.0254-6051.2014.05.026 Abstract （268）      PDF （542KB）（319）       Knowledge map    Reference | Related Articles | Metrics Select Influence of heat treatment process on microstructure and mechanical properties of 60Si2CrVA spring steel Zhang Zhanling, Zhao Fei1, Tan Wenlong HTM    2014, 39 (5): 104-107.   doi:10.13251/j.issn.0254-6051.2014.05.027 Abstract （435）      PDF （164KB）（378）       Knowledge map    Reference | Related Articles | Metrics Select Strengthening techniques and cost reduction ways for forged steel crankshaft HTM    2014, 39 (5): 107-111.   doi:10.13251/j.issn.0254-6051.2014.05.028 Abstract （279）      PDF （157KB）（227）       Knowledge map    Reference | Related Articles | Metrics Select Influence of repeated quenching and tempering on microstructure and mechanical properties of 42CrMo steel Xu Gangxin, Chen Liang, Li Bo, Jiang Xinbiao, Yao Xiongfei, Wang Jian, Liu Zhide HTM    2014, 39 (5): 112-114.   doi:10.13251/j.issn.0254-6051.2014.05.029 Abstract （369）      PDF （164KB）（231）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and uniformity of plasma nitrided layer with rare earth accelerator Li Shuangxi, Gu Min, Zhang Binghua, Xu Hongxiang, Wang Hongwei HTM    2014, 39 (5): 114-117.   doi:10.13251/j.issn.0254-6051.2014.05.030 Abstract （271）      PDF （175KB）（285）       Knowledge map    Related Articles | Metrics Select Hot stamping processing of TRIP steel for automotive body Gao Qifeng, Wu Xiongxi HTM    2014, 39 (5): 118-121.   doi:10.13251/j.issn.0254-6051.2014.05.031 Abstract （262）      PDF （157KB）（507）       Knowledge map    Related Articles | Metrics Select Microstructure and mechanical properties of 300M steel after vacuum hating and gas quenching Chen Tianyun, Liu Tianqi, Sun Feng HTM    2014, 39 (5): 122-124.   doi:10.13251/j.issn.0254-6051.2014.05.032 Abstract （269）      PDF （183KB）（234）       Knowledge map    Reference | Related Articles | Metrics Select Optimization of heat treatment process for spray formed ZA35 alloy based on artificial neural network Liu Jingfu, Li Shuai, Fan Yechao HTM    2014, 39 (5): 125-129.   doi:10.13251/j.issn.0254-6051.2014.05.033 Abstract （255）      PDF （162KB）（281）       Knowledge map    Related Articles | Metrics Select Effects of aging temperature on microstructure and mechanical properties of as-rolled 7075 aluminum alloy Wang Menghan, Xian Guocai, Huang Long HTM    2014, 39 (5): 129-131.   doi:10.13251/j.issn.0254-6051.2014.05.034 Abstract （290）      PDF （171KB）（207）       Knowledge map    Related Articles | Metrics Select Numerical simulation on heat treatment process optimization of fan impeller Zhang Min, Fan Wenjing, Chu Qiaoling HTM    2014, 39 (5): 132-137.   doi:10.13251/j.issn.0254-6051.2014.05.035 Abstract （311）      PDF （182KB）（522）       Knowledge map    Related Articles | Metrics Select Numerical simulation and EBSD analyses on dynamic recrystallization of 7050 aluminium alloy Zhang Yueting, Zhou Jie, Huang Zhiyong, Jia Yaojun, Gao Lin HTM    2014, 39 (5): 138-140.   doi:10.13251/j.issn.0254-6051.2014.05.036 Abstract （342）      PDF （163KB）（217）       Knowledge map    Related Articles | Metrics Select Residual stress analysis in functionally gradient glass-ceramic coatings on Q235 steel Zhou Liming, Gong Wei, Wang Enze, Han Teng HTM    2014, 39 (5): 141-144.   doi:10.13251/j.issn.0254-6051.2014.05.037 Abstract （294）      PDF （163KB）（262）       Knowledge map    Reference | Related Articles | Metrics Select Fracture failure analysis of 23CrNi3Mo steel drill Huang Bin, Zhou Leyu, Liu Yazheng, Yan Yongming, Chen Lie, Wang Leiying HTM    2014, 39 (5): 145-149.   doi:10.13251/j.issn.0254-6051.2014.05.038 Abstract （296）      PDF （175KB）（323）       Knowledge map    Related Articles | Metrics Select Failure analysis of hydrocylinder Wang Wenyin, Gu Yongqin, Ye Haiyan HTM    2014, 39 (5): 150-153.   doi:10.13251/j.issn.0254-6051.2014.05.039 Abstract （346）      PDF （338KB）（334）       Knowledge map    Related Articles | Metrics Select China roadmap of heat treatment & surface modification technology HTM    2014, 39 (5): 154-156.   Abstract （210）      PDF （249KB）（319）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and impact properties of CGHAZ in low-alloy structural steel containing C Yuan Zhuohao , Wang Fuming, Wei Shilai, Ye Gaoqi HTM    2014, 39 (6): 1-4.   doi:10.13251/j.issn.0254-6051.2014.06.001 Abstract （297）      PDF （268KB）（287）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and mechanical properties of electroslag and electric furnace H13 steel Wang Ming,Ma Dangshen, Liu Zhentian, Chi Hongxiao, Dai Jianqing HTM    2014, 39 (6): 5-10.   doi:10.13251/j.issn.0254-6051.2014.06.002 Abstract （324）      PDF （164KB）（266）       Knowledge map    Reference | Related Articles | Metrics Select Cryogenic mechanical properties of L245NB steel Wei Zhigang, Wei Yaodong, Shi Weiliang, Su Hui, Lü Bailin, Li Weijun, Wang Bingxin HTM    2014, 39 (6): 10-14.   doi:10.13251/j.issn.0254-6051.2014.06.003 Abstract （248）      PDF （163KB）（307）       Knowledge map    Related Articles | Metrics Select Microstructure of hot-dip Zn-0.06%Ti-0.04%Al coating Wang Shengmin, Zhao Xiaojun, He Mingyi, Huang Guoxiong HTM    2014, 39 (6): 15-18.   doi:10.13251/j.issn.0254-6051.2014.06.004 Abstract （225）      PDF （162KB）（280）       Knowledge map    Related Articles | Metrics Select Phase and hardness variation of Al-10wt%Si coating on steel plate after austenitizing Zhang Jie, Jiang Sheming, Zhang Qifu, Liu Changsheng HTM    2014, 39 (6): 19-22.   doi:10.13251/j.issn.0254-6051.2014.06.005 Abstract （237）      PDF （162KB）（311）       Knowledge map    Reference | Related Articles | Metrics Select Hot forming properties of high carbon steel 72A Xiong Ye, Chen Weiqing HTM    2014, 39 (6): 23-25.   doi:10.13251/j.issn.0254-6051.2014.06.006 Abstract （271）      PDF （166KB）（266）       Knowledge map    Related Articles | Metrics Select Austenite grain size and dissolved rate of alloy elements phase in high strength low alloy steel during heating process Li Bin, Tang Guangbo, Li Shengli, Li Quan, Chen Xiaoxiao, Liu Shuang HTM    2014, 39 (6): 26-28.   doi:10.13251/j.issn.0254-6051.2014.06.007 Abstract （224）      PDF （162KB）（245）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and properties of spray coating of argon arc remelting iron based alloy powder Shi Haifang, Wang Zhongqi, Bai Yu, Zhou Yuming HTM    2014, 39 (6): 29-31.   doi:10.13251/j.issn.0254-6051.2014.06.008 Abstract （228）      PDF （170KB）（303）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and torsion properties of DT4 steel after cycle heat treatment Mao Xiujuan, Zhou Xiying, Pei Shiqing, Jiang Qiang, Chen Ming, Shao Jiajia HTM    2014, 39 (6): 32-34.   doi:10.13251/j.issn.0254-6051.2014.06.009 Abstract （271）      PDF （159KB）（270）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and mechanical properties of cast magnesium alloy for automobile Chen Wenbo HTM    2014, 39 (6): 35-38.   doi:10.13251/j.issn.0254-6051.2014.06.0010 Abstract （240）      PDF （160KB）（260）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure fining of as-cast CuAl alloy Liu Ying, Wang Feng HTM    2014, 39 (6): 39-40.   doi:10.13251/j.issn.0254-6051.2014.06.011 Abstract （269）      PDF （162KB）（172）       Knowledge map    Related Articles | Metrics Select Effects of tempering temperature on microstructure and mechanical properties of 40CrNi3MoV steel Liu Yan, Wang Maoqiu, Liu Guoquan HTM    2014, 39 (6): 41-45.   doi:10.13251/j.issn.0254-6051.2014.06.012 Abstract （270）      PDF （165KB）（241）       Knowledge map    Related Articles | Metrics Select Effect of electric current pulse on pearlite of hypoeutectic Fe-C alloys Huang Zhengyang, Cen Qihong, Li Zhenhua, Wu Ying, Zou Lei HTM    2014, 39 (6): 46-49.   doi:10.13251/j.issn.0254-6051.2014.06.013 Abstract （254）      PDF （187KB）（292）       Knowledge map    Related Articles | Metrics Select Deformation resistance and its mathematical model of SA533B steel for nuclear reactor pressure vessel Zhou Guangjie, Liu Xiaowei, Zhao Aimin, Wu Huibin HTM    2014, 39 (6): 50-53.   doi:10.13251/j.issn.0254-6051.2014.06.014 Abstract （257）      PDF （170KB）（262）       Knowledge map    Reference | Related Articles | Metrics Select Effects of ultrasonic on microstructure and properties of GCr15 steel during solidification Wang Haijun, Wang Jianjun, Chang Lizhong, Zhou Li, Cong Junqiang, Meng Lipeng HTM    2014, 39 (6): 53-57.   doi:10.13251/j.issn.0254-6051.2014.06.015 Abstract （297）      PDF （184KB）（337）       Knowledge map    Reference | Related Articles | Metrics Select Thermal deformation characteristics of 0.30C-Cr-W nitriding bearing steel Xu Chuan,Yang Maosheng, Ma Aiqiong HTM    2014, 39 (6): 58-63.   doi:10.13251/j.issn.0254-6051.2014.06.016 Abstract （246）      PDF （155KB）（251）       Knowledge map    Reference | Related Articles | Metrics Select Effects of secondary cold-rolled intermediate annealing on microstructure and texture of grain-oriented silicon steel based on CSP technology Ju Fang, Jin Zili, Ren Huiping, Sun Kaiyu, Qu Wei HTM    2014, 39 (6): 64-67.   doi:10.13251/j.issn.0254-6051.2014.06.017 Abstract （250）      PDF （160KB）（235）       Knowledge map    Reference | Related Articles | Metrics Select Effect of quenching temperature on phase structure of Nd1.5Mg0.5Ni7 hydrogen storage alloy Liang Chen, Gong Zitianzong, Li Lingfeng, Xue Kemin HTM    2014, 39 (6): 67-70.   doi:10.13251/j.issn.0254-6051.2014.06.018 Abstract （232）      PDF （168KB）（292）       Knowledge map    Related Articles | Metrics Select Mechanism of annealing softening of double-wall brazed tube Cheng Zhenbang, Lu Jun, Wang Jike, Wei Xicheng HTM    2014, 39 (6): 71-76.   doi:10.13251/j.issn.0254-6051.2014.06.019 Abstract （222）      PDF （172KB）（284）       Knowledge map    Related Articles | Metrics Select Magnetic properties of 1J50 soft magnetic alloy Wang Xiaojun, Zhang Benpeng, Xia Tiandong, Chen Lianguang, Yang Jian HTM    2014, 39 (6): 77-80.   doi:10.13251/j.issn.0254-6051.2014.06.020 Abstract （353）      PDF （176KB）（546）       Knowledge map    Related Articles | Metrics Select Improvement of heat treatment process of 60Si2Mn steel disc springs Luo Changsen, Luo Hong, Feng Chun, Chai Yan HTM    2014, 39 (6): 80-83.   doi:10.13251/j.issn.0254-6051.2014.06.021 Abstract （317）      PDF （174KB）（529）       Knowledge map    Reference | Related Articles | Metrics Select 新型钛合金TC8-1棒材显微组织及热处理工艺 Li Yafei, Wang Weidong, He Yonggang, Wang Yongmei HTM    2014, 39 (6): 84-87.   doi:10.13251/j.issn.0254-6051.2014.06.022 Abstract （472）      PDF （177KB）（305）       Knowledge map    Related Articles | Metrics Select Effect of standoff distance on properties of Al coating during cold spraying Zhang Jianfeng, Chen Zhijun, Yao Jianhua HTM    2014, 39 (6): 88-90.   doi:10.13251/j.issn.0254-6051.2014.06.023 Abstract （268）      PDF （178KB）（355）       Knowledge map    Related Articles | Metrics Select Effect of heat treatment on mechanical properties of high temperature alloy GH2132 Ou Meigui, Yang Chunlin, Yang Zujian HTM    2014, 39 (6): 91-93.   doi:10.13251/j.issn.0254-6051.2014.06.024 Abstract （288）      PDF （172KB）（355）       Knowledge map    Related Articles | Metrics Select Effects of aging on microstructures and mechanical properties of 2A12 aluminum alloy He Shuangxi, Liu Xiangyang, Xie Guanghui, Liu Xigang, Shang Kun, Zhang Xinjun HTM    2014, 39 (6): 94-96.   doi:10.13251/j.issn.0254-6051.2014.06.025 Abstract （287）      PDF （154KB）（318）       Knowledge map    Related Articles | Metrics Select Nitriding process of electromagnetic pure iron Sun Feng, Wang Lin, Zhang Yali, Tong Xiaojun, He Ruijun, Cheng Zhiyong HTM    2014, 39 (6): 97-99.   doi:10.13251/j.issn.0254-6051.2014.06.026 Abstract （262）      PDF （186KB）（303）       Knowledge map    Related Articles | Metrics Select Effects of postweld heat treatment on microstructure and hardness of fusion zone of low alloy cast steel Wang Menghan, Xian Guocai, Huang Long, Zhou Jie HTM    2014, 39 (6): 100-102.   doi:10.13251/j.issn.0254-6051.2014.06.027 Abstract （269）      PDF （171KB）（170）       Knowledge map    Reference | Related Articles | Metrics Select Effects of continuous quenching and tempering on microstructure and properties of 30MnSi steel bar Liu Bingliang, Nie huiwen HTM    2014, 39 (6): 103-105.   doi:10.13251/j.issn.0254-6051.2014.06.028 Abstract （248）      PDF （179KB）（286）       Knowledge map    Related Articles | Metrics Select Effect of hole strengthening treatment on fatigue property of magnesium alloy parts with hole Ma Ming，Tian Long, He Qiang HTM    2014, 39 (6): 106-108.   doi:10.13251/j.issn.0254-6051.2014.06.029 Abstract （242）      PDF （178KB）（149）       Knowledge map    Related Articles | Metrics Select Effects of V, Ti on microstructure, texture and precipitation of conventional grain-oriented silicon steel Yan Jianxin, Ling Chen, Fu Bing, Fan Lifeng, Qiu Shengtao, Qi Yuanhong HTM    2014, 39 (6): 109-114.   doi:10.13251/j.issn.0254-6051.2014.06.030 Abstract （257）      PDF （179KB）（256）       Knowledge map    Reference | Related Articles | Metrics Select Development of weathering bridge steel Q370qEW with enhanced weldability Wang Na, Zhang Yu, He Yuchun, Li Xiaobao HTM    2014, 39 (6): 114-119.   doi:10.13251/j.issn.0254-6051.2014.06.031 Abstract （279）      PDF （148KB）（230）       Knowledge map    Reference | Related Articles | Metrics Select Effect of adding amount of V on low temperature impact properties of construction steel You Xiaoming HTM    2014, 39 (6): 120-122.   doi:10.13251/j.issn.0254-6051.2014.06.032 Abstract （229）      PDF （166KB）（256）       Knowledge map    Related Articles | Metrics Select Effects of V, controlled rolling and cooling process on microstructure and mechanical properties of earthquake resistant steel for large span building Zhang Weiyu HTM    2014, 39 (6): 123-125.   doi:10.13251/j.issn.0254-6051.2014.06.033 Abstract （309）      PDF （165KB）（211）       Knowledge map    Related Articles | Metrics Select Study on the delayed fracture of TWIP steel based on Dynaform software Mi Zhenli, Xue Yao, Wu Yanxin, Jiang Haitao HTM    2014, 39 (6): 126-129.   doi:10.13251/j.issn.0254-6051.2014.06.034 Abstract （256）      PDF （167KB）（276）       Knowledge map    Reference | Related Articles | Metrics Select Numerical simulation of microstructure evolution on the surface of 45 steel during electron beam phase transformation hardening process Chen Hucheng, Wei Deqiang, Wang Rong, Shi Shaoyuan HTM    2014, 39 (6): 130-135.   doi:10.13251/j.issn.0254-6051.2014.06.035 Abstract （503）      PDF （163KB）（259）       Knowledge map    Reference | Related Articles | Metrics Select Temperature field and its influence on hardness of cast steel matrix dual metal hot forging die Li Mengyao, Zhou Jie, Yu Yingyan, Bi Huan HTM    2014, 39 (6): 136-139.   doi:10.13251/j.issn.0254-6051.2014.06.036 Abstract （238）      PDF （167KB）（260）       Knowledge map    Related Articles | Metrics Select Influencing factors of IF steel texture formation and evolution Xiao Qi, Li Chunfu, Zhu Yike, Shao Dengquan, Wu Junjie, Yang Shizhou HTM    2014, 39 (6): 140-144.   doi:10.13251/j.issn.0254-6051.2014.06.037 Abstract （471）      PDF （174KB）（276）       Knowledge map    Related Articles | Metrics Select Application of color metallography for microstructure analysis of dual-phase steel Wan Rongchun, Wang Xuewu, Wang Jun HTM    2014, 39 (6): 144-146.   doi:10.13251/j.issn.0254-6051.2014.06.038 Abstract （256）      PDF （181KB）（320）       Knowledge map    Related Articles | Metrics Select Design method of hardening depth for carburized gear Xiao Weizhong, Liu Zhongming, Yuan Yupeng HTM    2014, 39 (6): 147-150.   doi:10.13251/j.issn.0254-6051.2014.06.039 Abstract （345）      PDF （176KB）（421）       Knowledge map    Related Articles | Metrics Select Heat treatment process evaluation method based on BP neural network optimized by genetic algorithm Zhao Xi, Qiu Cheng HTM    2014, 39 (6): 151-154.   doi:10.13251/j.issn.0254-6051.2014.06.040 Abstract （244）      PDF （174KB）（242）       Knowledge map    Related Articles | Metrics Select Fracture failure analysis of motor gear Yang Feng HTM    2014, 39 (6): 155-157.   doi:10.13251/j.issn.0254-6051.2014.06.041 Abstract （272）      PDF （174KB）（294）       Knowledge map    Related Articles | Metrics Select Fracture analysis and improvement measures of traction machine bearing Huang Haijun, Liu Yi, Li Xinlin HTM    2014, 39 (6): 158-160.   doi:10.13251/j.issn.0254-6051.2014.06.042 Abstract （236）      PDF （259KB）（248）       Knowledge map    Related Articles | Metrics Select China roadmap of heat treatment & surface modification technology HTM    2014, 39 (6): 161-164.   Abstract （187）      PDF （235KB）（336）       Knowledge map    Reference | Related Articles | Metrics Select Effect of austenitizing temperature on microstructure of La deoxidized steel Li Hongke, Song Bo, Wang Liyong, Yang Yuhou, Chen Maochuan HTM    2014, 39 (7): 1-6.   doi:10.13251j.issn.0254-6051.2014.07.001 Abstract （215）      PDF （280KB）（335）       Knowledge map    Reference | Related Articles | Metrics Select Study on mechanical properties of austenite and ferrite in niobium steel based on first-principle method Liu Xuejie, Qu Jian, Gao Li, Wei Huai, Ren Yuan HTM    2014, 39 (7): 7-11.   doi:10.13251/j.issn.0254-6051.2014.07.002 Abstract （223）      PDF （150KB）（245）       Knowledge map    Reference | Related Articles | Metrics Select Carburizing quality and bending fatigue life of 17Cr2Ni2MoVNb and 20Cr2Ni4A steel gears Du Shaofeng, Zhao Wenjun, Hong Zhenjun, Jia Dongsheng, Zhang Yaocui HTM    2014, 39 (7): 12-18.   doi:10.13251/j.issn.0254-6051.2014.07.003 Abstract （245）      PDF （155KB）（170）       Knowledge map    Reference | Related Articles | Metrics Select Microstructure and formability of rolled and annealed Mg-1.5Zn-0.2Ce alloy Ma Zhao, Jiang Haitao, Cai Zhengxu, Kang Qiang, Duan Xiaoge HTM    2014, 39 (7): 19-22.   doi:10.13251/j.issn.0254-6051.2014.07.004 Abstract （206）      PDF （168KB）（223）       Knowledge map    Reference | Related Articles | Metrics Select Effect of Ni content of weld wire on microstructure and properties of offshore steel EQ47 in gas metal arc weld joint Dong Liming, Pan Xin，Zhang Yu，Wang Yinbai HTM    2014, 39 (7): 23-27.   doi:10.13251/j.issn.0254-6051.2014.07.005 Abstract （185）      PDF （162KB）（321）       Knowledge map    Reference | Related Articles | Metrics Select Effects of carbon and oxygen impurities on impact properties of 93W-5Ni-2Fe high density tungsten alloy Li Qiang, Wang Wei, Yang Xiaofeng, Fan Hui HTM    2014, 39 (7): 28-31.   doi:10.13251/j.issn.0254-6051.2014.07.006 Abstract （210）      PDF （160KB）（222）       Knowledge map    Reference | Related Articles | Metrics Select Effect of austenite deformation on CCT curves and microstructure of weathering steel Cong Yu, Song Fengming HTM    2014, 39 (7): 31-35.   doi:10.13251/j.issn.0254-6051.2014.07.007 Abstract （211）      PDF （172KB）（180）       Knowledge map    Reference | Related Articles | Metrics Select Resistance to delayed fracture properties of high strength steel for building Wang Limin HTM    2014, 39 (7): 36-38.   doi:10.13251/j.issn.0254-6051.2014.07.008 Abstract （207）      PDF （170KB）（240）       Knowledge map    Reference | Related Articles | Metrics Select Effect of the content of Nb on growth law of austenite grain in 20CrMnTiH gear steel Tong Qian, Cui Jingyu, Liu Yangbo, Wang Lifeng HTM    2014, 39 (7): 39-43.   doi:10.13251/j.issn.0254-6051.2014.07.009 Abstract （192）      PDF （154KB）（266）       Knowledge map    Reference | Related Articles | Metrics Select Synthesis of Al-Ti-C master alloy and its application in 4032 alloy Zhang Jing, Zhao Jingjing, Du Yong HTM    2014, 39 (7): 43-46.   doi:10.13251/j.issn.0254-6051.2014.07.010 Abstract （271）      PDF （165KB）（277）       Knowledge map    Reference | Related Articles | Metrics Select Fracture property of different pipeline steels at electrochemical hydrogen charging state Chen Gang, Wang Liping HTM    2014, 39 (7): 47-49.   doi:10.13251/j.issn.0254-6051.2014.07.011 Abstract （208）      PDF （170KB）（207）       Knowledge map    Reference | Related Articles | Metrics Select Preparation of porous titanium with high porosity and surface modification by micro-arc oxidation Fan Xingping HTM    2014, 39 (7): 50-54.   doi:10.13251/j.issn.0254-6051.2014.07.012 Abstract （190）      PDF （172KB）（522）       Knowledge map    Reference | Related Articles | Metrics Select Effect of high temperature heat treatment on quasicrystal phase in Mg82Zn14.2Y3.3Zr0.5 alloy Liu Zheng, Chen Jie, Mao Pingli HTM    2014, 39 (7): 54-59.   doi:10.13251/j.issn.0254-6051.2014.07.013 Abstract （188）      PDF （158KB）（284）       Knowledge map    Reference | Related Articles | Metrics Select Hot compressive behavior and evolution of microstructure of TC18 alloy Bai Liu, Bai Kewu HTM    2014, 39 (7): 59-62.   doi:10.13251/j.issn.0254-6051.2014.07.014 Abstract （240）      PDF （169KB）（284）       Knowledge map    Reference | Related Articles | Metrics Select Study on the β1→α+β2 transformation kinetics of Ti-6Al-4V alloy by DSC Zhang Ronghua HTM    2014, 39 (7): 63-65.   doi:10.13251/j.issn.0254-6051.2014.07.015 Abstract （182）      PDF （165KB）（272）       Knowledge map    Reference | Related Articles | Metrics Select New heating technology of hot stamping Li Yong, Li Jiadong, Fu Tianliang, Wang Zhaodong, Liu Yujia HTM    2014, 39 (7): 66-71.   doi:10.13251/j.issn.0254-6051.2014.07.016 Abstract （215）      PDF （170KB）（302）       Knowledge map    Reference | Related Articles | Metrics Select Effect of processing rate and recrystallization annealing process on properties of ultra-light aluminum foil stock Tang Hailin, Yuan Rong, Jin Guohua, Yue Youcheng HTM    2014, 39 (7): 72-75.   doi:10.13251/j.issn.0254-6051.2014.07.017 Abstract （197）      PDF （153KB）（250）       Knowledge map    Reference | Related Articles | Metrics Select Single/double stage quenching process of 7050 aluminum alloy Zheng Ying, Zhang Jin, Fan Shitong, Deng Yunlai HTM    2014, 39 (7): 76-80.   doi:10.13251/j.issn.0254-6051.2014.07.018 Abstract （218）      PDF （162KB）（317）       Knowledge map    Reference | Related Articles | Metrics Select Effect of jetting time on GCr15 bearing rings surface roughness Liu Xiaochu, Huang Jun, Xiao Suhua, He Quanpeng, Xiao Jinrui, Xie Bihong HTM    2014, 39 (7): 81-85.   doi:10.13251/j.issn.0254-6051.2014.07.019 Abstract （401）      PDF （273KB）（267）       Knowledge map    Reference | Related Articles | Metrics Select Deep layer plasma nitriding of an age-hardened steel Du Shufang HTM    2014, 39 (7): 85-88.   doi:10.13251/j.issn.0254-6051.2014.07.020 Abstract （213）      PDF （165KB）（230）       Knowledge map    Reference | Related Articles | Metrics Select Short-time tempering process for ultra-high strength steel bolts Sun Feng, Tong Xiaojun, Li Guoqing, Yao Lan, Wang Guangsheng HTM    2014, 39 (7): 89-92.   doi:10.13251/j.issn.0254-6051.2014.07.021 Abstract （165）      PDF （163KB）（255）       Knowledge map    Reference | Related Articles | Metrics Select Effect of annealing treatment on microstructure and properties of cold rolled aluminum/steel composite Zhang Xiaojun, Zhao Jiaying, Liuhui, Zhou Dejing HTM    2014, 39 (7): 93-95.   doi:10.13251/j.issn.0254-6051.2014.07.022 Abstract （243）      PDF （163KB）（273）       Knowledge map    Reference | Related Articles | Metrics Select Effect of different heat treatment process on microstructure and properties of on-line quenching Q690 steel Bao Haiyan, Yu Hongwei, Wang Cheng HTM    2014, 39 (7): 96-98.   doi:10.13251/j.issn.0254-6051.2014.07.023 Abstract （328）      PDF （175KB）（336）       Knowledge map    Reference | Related Articles | Metrics Select Heat treatment process of Q690D steel plate Wang Jianjun HTM    2014, 39 (7): 99-101.   doi:10.13251/j.issn.0254-6051.2014.07.024 Abstract （210）      PDF （161KB）（441）       Knowledge map    Reference | Related Articles | Metrics Select Heat treatment process, microstructure and properties of new CuNiCrSiZr alloy She Kai, Sun Menglong, Wu Congyue, Xie Chunsheng HTM    2014, 39 (7): 102-107.   doi:10.13251/j.issn.0254-6051.2014.07.025 Abstract （275）      PDF （181KB）（198）       Knowledge map    Reference | Related Articles | Metrics Select Heat treatment process for LZ50 railway axle steel containing vanadium Yang Xingdi HTM    2014, 39 (7): 107-110.   doi:10.13251/j.issn.0254-6051.2014.07.026 Abstract （256）      PDF （158KB）（151）       Knowledge map    Related Articles | Metrics Select Effect of laser cladding process on microstructure of nickel-base titanium carbide cladding layer He Changlin, Chen Shaoke, Zhou Zhonghe HTM    2014, 39 (7): 111-116.   doi:10.13251/j.issn.0254-6051.2014.07.027 Abstract （196）      PDF （172KB）（193）       Knowledge map    Reference | Related Articles | Metrics Select Effect of low temperature plasma hardening treatment on microstructure and properties of AISI 420 stainless steel Du Wei, Zhao Cheng HTM    2014, 39 (7): 116-120.   doi:10.13251/j.issn.0254-6051.2014.07.028 Abstract （234）      PDF （170KB）（200）       Knowledge map    Reference | Related Articles | Metrics Select Effect of solid solution time on microstructure and electrochemical property of Al-Cu Alloy Liu Jingfu, Li Heliang, Liu Chuandong, Yan Xipeng HTM    2014, 39 (7): 121-124.   doi:10.13251/j.issn.0254-6051.2014.07.029 Abstract （200）      PDF （172KB）（229）       Knowledge map    Reference | Related Articles | Metrics Select Cladding parameters and properties of Ni60 alloy cladded on low carbon steel by laser Zhao Bing, Lu Yuanhang, Li Zhang, Luo Fang HTM    2014, 39 (7): 124-129.   doi:10.13251/j.issn.0254-6051.2014.07.030 Abstract （209）      PDF （179KB）（249）       Knowledge map    Reference | Related Articles | Metrics Select Influence of distance between target and substrate on morphology and distribution of macroparticles during arc ion plating Wei Yongqiang, Wen Zhenhua, Jiang Zhiqiang, Feng Xianzhang, Tian Xiubo HTM    2014, 39 (7): 130-134.   doi:10.13251/j.issn.0254-6051.2014.07.031 Abstract （200）      PDF （179KB）（291）       Knowledge map    Reference | Related Articles | Metrics Select Influence of quenching and tempering on microstructure and property of Cr5 backup roll Yue Shenwei, Yuan Hailun, Wang Wenyan, Li Changyi, Xie Jingpei,Yue Zongge HTM    2014, 39 (7): 135-139.   doi:10.13251/j.issn.0254-6051.2014.07.032 Abstract （224）      PDF （175KB）（241）       Knowledge map    Related Articles | Metrics Select Effect of annealing process on welding properties of middle and thick plate Liu Bingliang, Zhang Zhaoxu HTM    2014, 39 (7): 139-142.   doi:10.13251/j.issn.0254-6051.2014.07.033 Abstract （214）      PDF （174KB）（243）       Knowledge map    Related Articles | Metrics Select Anti-oxidation combustion technology through self-circulation of flue gas in direct-fired heat treatment furnaces Wu Hongbin, Xia Dehong, Ren Ling, Guo Meirong HTM    2014, 39 (7): 143-147.   doi:10.13251/j.issn.0254-6051.2014.07.034 Abstract （218）      PDF （167KB）（234）       Knowledge map    Related Articles | Metrics Select Numerical simulation of residual stress for laser shock processing of gear teeth Zhang Xin, Li Huan, Zhang Xingquan, Chen Liusan HTM    2014, 39 (7): 148-153.   doi:10.13251/j.issn.0254-6051.2014.07.035 Abstract （182）      PDF （169KB）（233）       Knowledge map    Reference | Related Articles | Metrics Select Finite element analysis on residual stress of different depth of surface welding layer Zhou Yuming, Shi Haifang HTM    2014, 39 (7): 153-156.   doi:10.13251/j.issn.0254-6051.2014.07.036 Abstract （206）      PDF （152KB）（285）       Knowledge map    Reference | Related Articles | Metrics Select Basic methods and application of infrared signal analysis Yao Zhongbo, Wang Haidou, Zhang Yubo, Li Guolu, Xu Binshi HTM    2014, 39 (7): 157-162.   doi:10.13251/j.issn.0254-6051.2014.07.037 Abstract （168）      PDF （178KB）（242）       Knowledge map    Reference | Related Articles | Metrics Select Optimization of electrolytic system for BaTiO3 dielectric films prepared by micro-arc oxidation Wang Min, Guo Huiyong, Li Wenfang, Zhang Guoge HTM    2014, 39 (7): 162-165.   doi:10.13251/j.issn.0254-6051.2014.07.038 Abstract （179）      PDF （162KB）（236）       Knowledge map    Reference | Related Articles | Metrics Select Failure analysis of P110 casing crack in hydrostatic proof test Qi Guoquan, Li Xunji, Qiang Yuan, Wang Fushan HTM    2014, 39 (7): 166-169.   doi:10.13251/j.issn.0254-6051.2014.07.039 Abstract （188）      PDF （255KB）（254）       Knowledge map    Reference | Related Articles | Metrics Select Analysis on straightening fracture of hot-rolled N80 seamless steel tube Sui Xiaohong, Yang Jing, Jin Xing, Li Yang HTM    2014, 39 (7): 169-172.   doi:10.13251/j.issn.0254-6051.2014.07.040 Abstract （210）      PDF （181KB）（222）       Knowledge map    Reference | Related Articles | Metrics Select Analysis of surface peeling of 490CL car wheel steel Ge Shaofei, Wu Juhuan, Zhao Ping HTM    2014, 39 (7): 173-177.   doi:10.13251/j.issn.0254-6051.2014.07.041 Abstract （170）      PDF （175KB）（218）       Knowledge map    Reference | Related Articles | Metrics Select Failure analysis of heat treatment cracking of large steel cast roll sleeve Jin Linkui, Zhao Janguo, Yuan Yuguang HTM    2014, 39 (7): 178-181.   doi:10.13251/j.issn.0254-6051.2014.07.042 Abstract （180）      PDF （172KB）（477）       Knowledge map    Related Articles | Metrics Select China roadmap of heat treatment & surface modification technology HTM    2014, 39 (7): 182-184.   Abstract （153）      PDF （249KB）（279）       Knowledge map    Reference | Related Articles | Metrics Select Dissolving and precipitation behavior of Nb-Ti carbonitrides in microalloyed steels Hao Bin, Zhang Xiaojuan, Yuan Shaoqiang HTM    2014, 39 (8): 1-4.   doi:10.13251/j.issn.0254-6051.2014.08.001 Abstract （390）      PDF （282KB）（149）       Knowledge map    Reference | Related Articles | Metrics Select Interfacial microstructure and strength of transient liquid-phase bonding of TiAl alloys with CuZrAl amorphous alloy interlayer Peng Wei, Zhang Dechuang, Tang Deming, Lin Jianguo HTM    2014, 39 (8): 5-10.   doi:10.13251/j.issn.0254-6051.2014.08.002 Abstract （123）      PDF （158KB）（132）       Knowledge map    Reference | Related Articles | Metrics Select  Influence of intermediate heat-treatment on distribution of second-phase particles and grain size of Al-Zn-Mg-Cu alloy Han Lianhua, Bai Linzhen, Chen Huiqin HTM    2014, 39 (8): 11-15.   doi:10.13251/j.issn.0254-6051.2014.08.003 Abstract （167）      PDF （173KB）（160）       Knowledge map    Reference | Related Articles | Metrics Select Interface microstructure and properties of Ti/Cu composite materials Lin Chao, Zhu Peixian, Zhou Shenggang, Cao Yong HTM    doi:10.13251/j.issn.0254-6051.2014.08.004 Select Effect of heat treatment on microstructure and properties of WC particles reinforced steel matrix composite prepared by electroslag melting and casting Zhang Ning, Qiang Yinghuai, Huang Chuanhui, Niu Jinan, Ding Gang HTM    doi:10.13251/j.issn.0254-6051.2014.08.005 Select Effect of cladding current on microstructure of AlCrFeCoNiCu high-entropy alloy coating by argon arc cladding Huo Wenyi, Shi Haifang, Zhang Jingyuan HTM    doi:10.13251/j.issn.0254-6051.2014.08.006 Select Effect of aging temperature on the microstructure and mechanical properties of 15-5PH steel after power spinning Guo Yajie, Li Yanming, Pan Xiaodong, Chen Junzhi, Wei Peng HTM    doi:10.13251/j.issn.0254-6051.2014.08.007 Select Effects of solid solution teatment on microstructure and mechanical properties of martensite/ferrite duplex stainless steel Sun Guoqiang, Yi Jianhong, Liang Jianxiong, Liu Zhenbao, Yang Zhiyong, Gan Guoyou HTM    doi:10.13251/j.issn.0254-6051.2014.08.008 Select Microstructure and mechanical properties of 690 MPa weld joint by tandem submerged arc welding Pan Xin, Zhang Yu, Wang Yinbai, Wang Na HTM    doi:10.13251/j.issn.0254-6051.2014.08.009 Select Effect of PWHT on microstructure and properties of strip surfacing layer of SAF2507 duplex stainless steel Yang Li, Shi Wei, Zhao Jiangtao, Li Jinmei HTM    doi:10.13251/j.issn.0254-6051.2014.08.010 Select Effect of aging on microstructure of 2A14 aluminum alloy under small amount of cold deformation Ye Mao, Meng Fuxin, Zhang Xun, Zhang Heng, Song Xiaoling, Hou Zhiyue, Guo Yongtao, Hou Xingyuan, Li Liang HTM    doi:10.13251/j.issn.0254-6051.2014.08.011 Select Microstructure evolution of extrusion ZK60 magnesium alloy bar by ACPP and its precipitation strengthening Duan Cuifang, Chang Wanjun HTM    doi:10.13251/j.issn.0254-6051.2014.08.012 Select Microstructure and wear resistance of laser clad WC/Co-Cr coating Zhang Xiaodong, Jie Xiaohua, Zeng Zhaoyubo, Yan Shengke, Zhang Yanmei HTM    doi:10.13251/j.issn.0254-6051.2014.08.013 Select Effect of heat treatment on corrosive wear resistance of Ni-W-P electroless plating in oil medium Ma Zhuang, Tao Ying, Guan Bowen, Li Zhichao HTM    doi:10.13251/j.issn.0254-6051.2014.08.014 Select Microstructure and mechanical properties of HIP diffusion bonded Al2O3/Kovar joint Li Qiang, Wang Wei, Yang Xiaofeng, Sun Zhao, Li Qishou HTM    doi:10.13251/j.issn.0254-6051.2014.08.015 Select Effects of Cerium on the magnetic properties and inclusion of the Sn-bearing high permeability non-oriented electrical steels Yao Zhiqiang, Liu Jie, Wang Quanli, Li Fei HTM    doi:10.13251/j.issn.0254-6051.2014.08.016 Select Hot ductility of EQ47 steel and influence of Mn and Cr on it Yuan Shentie, Lai Chaobin, Chen Yingjun HTM    doi:10.13251/j.issn.0254-6051.2014.08.017 Select Effects of Si/Mn ratio on microstructure and wear resistance of bainite cast steel Zhao Shufeng, Li Guolu, Jiang Ruijiao, Wang Cheng HTM    doi:10.13251/j.issn.0254-6051.2014.08.018 Select Effect of multi-level grain fining on fracture toughness of 18Ni maraging steel Zhang Zhanling, Zhao Fei, Shi Yu HTM    doi:10.13251/j.issn.0254-6051.2014.08.019 Select Effect of induction tempering on microstructure and stress relaxation of Q550D steel Zhao Liping, Liu Wen, Yu Wen, Zhang Huimin, Li Zhao, Yuan Xue HTM    doi:10.13251/j.issn.0254-6051.2014.08.020 Select Effect of solid solute carbon on hardening property of ultra-low carbon bake hardened steel HTM    doi:10.13251/j.issn.0254-6051.2014.08.021 Select Preparation and performance of oxide coating on TiN anodes Wang Fu, Zhu Peixian, Ma Huiyu HTM    doi:10.13251/j.issn.0254-6051.2014.08.022 Select Improvement of microstructure and properties of TA1 titanium alloy sheet Wang Ruiqin, Huang Xianming, Fu Wenjie, Dang Peng,Wu Xiaodong, Gao Weina, Li Hui HTM    doi:10.13251/j.issn.0254-6051.2014.08.023 Select Effect of QPQ salt bath treatment on microstructure and properties of 45 steel Wang Xiao, Wu Congyue, Sun Menglong，Xie Chunsheng HTM    doi:10.13251/j.issn.0254-6051.2014.08.024 Select Effect of aging process on microstructure and properties of Cu-15Ni-8Sn cast alloy Zhou Yunhong, Zhou Xiaolong, Cao Jianchun, Wang Panpan, Fan Yongjun HTM    doi:10.13251/j.issn.0254-6051.2014.08.025 Select Effect of homogenization on microstructure and properties of 5083 aluminium alloy ingot Meng Ling, Zhao Qizhong, Li Chunliu, He Jianxian HTM    doi:10.13251/j.issn.0254-6051.2014.08.026 Select Effect of aging process on corrosion resistance of 2205 duplex stainless steel Chen Lingling, Suo Huibo, Liang Xiaohui HTM    doi:10.13251/j.issn.0254-6051.2014.08.027 Select Effect of heat treatment on stress corrosion of X80 pipeline steel in simulated seawater Huang Bensheng, Fan Zimeng, Chen Liu, Zhou Lujiang, Shao Dapeng, Deng Wei HTM    doi:10.13251/j.issn.0254-6051.2014.08.028 Select Carburizing process of 22CrNi2MoNbH steel gear Duan Youquan，Wang Meng, Lü Maohui HTM    doi:10.13251/j.issn.0254-6051.2014.08.029 Select Improvement of heat treatment process for ZGMn13TiRE steel tread shoe Liu Ke, Yang Bing, Yu Jie, Gu Xing, Li Yongjian HTM    doi:10.13251/j.issn.0254-6051.2014.08.030 Select Deep cryogenic treatment of Cr12MoV steel sealing boots parts Zhao Guohua HTM    doi:10.13251/j.issn.0254-6051.2014.08.031 Select Heat treatment quality control of small diameter pipes in dense pipes row Cai Zhanyou, Ye Chaofeng HTM    doi:10.13251/j.issn.0254-6051.2014.08.032 Select Walking beam furnace monitoring system based on multilevel network Tian Hai, Jin Keke, Xu Cong, Yuan Youkuo HTM    doi:10.13251/j.issn.0254-6051.2014.08.033 Select Simulation of roller hearth heat treatment furnace based on Fluent software Liu Yujia, Li Yong, Fu Tianliang, Li Jiadong, Hou Shuai, Wang Zhaodong, Wang Guodong HTM    doi:10.13251/j.issn.0254-6051.2014.08.034 Select Application of active disturbance rejection control technology on control system of a bogie hearth furnace Xu Xinle, Ying Xiaokun, Qu Qiang, Su Zhen, Wang Kewei, Ma Lilin, Zhang Yi HTM    doi:10.13251/j.issn.0254-6051.2014.08.035 Select Relationship between quenched martensite hardness of carbon steel and carbon content Yao Yuhuan, Zhang Libin, Wang Haiquan, Zhang Xiaoqin HTM    doi:10.13251/j.issn.0254-6051.2014.08.036 Select Microstructure of ablation metamorphic layer on compressor rotor shaft surface Jiang Yantao, Du Xiaodong, Wang Feng, Wang Jinjia, Shen Jian, Zhou Dan, Liu Guanfu HTM    doi:10.13251/j.issn.0254-6051.2014.08.037 Select Effect of center segregation on impact toughness of high strength low carbon bainitic steel Du Minxian, Peng Huaxia HTM    doi:10.13251/j.issn.0254-6051.2014.08.038 Select Comparative analysis of boring performance of 38CrMoAl steel bars for machine barrel Bi Geping, Zhang Baochuan, Chen Hualai, Ding Haifeng, Ji Wenlong HTM    doi:10.13251/j.issn.0254-6051.2014.08.039 Select Failure analysis of fatigue fracture of drill sleeve HTM    doi:10.13251/j.issn.0254-6051.2014.08.040 Select Failure analysis on fracture of helical cylindrical gear Zhang Xin, Zhang Xingquan, She Jianping, Li Huan, Qi Xiaoli, Feng Jianyou HTM    doi:10.13251/j.issn.0254-6051.2014.08.041 Select Cause analysis and countermeasures of bright spot defect on hot dip galvanized plate with big zinc flowers Li Guoyang, Xia Qiangqiang HTM    doi:10.13251/j.issn.0254-6051.2014.08.042 Select China roadmap of heat treatment & surface modification technology HTM    Select Effect of aging condition on mechanical and corrosion properties of a new type high strength aluminum alloy profile Ma Zhifeng, Song Wei, Wang Shaohua, Liu Hui, Zhang Xianfeng, Sun Gang, Feng Zhaohui, Lu Zheng HTM    doi:10.13251/j.issn.0254-6051.2014.09.001 Select Effects of quenching and tempering on microstructure and mechanical properties of low-carbon microalloyed steel Chen Kang, Zuo Xiurong, Li Yuan, Zhao Pengxiang, Qiu Yuelong, Zhang Zhanzhan HTM    doi:10.13251/j.issn.0254-6051.2014.09.002 Select Effects of heat treatment on microstructure and mechanical properties of G110 alloy Liu Qing, Yang Gang, Zhou Xiaoling, Bao Hansheng, Cheng Shichang HTM    doi:10.13251/j.issn.0254-6051.2014.09.003 Select Effects of non-recrystallization rolling reduction on the microstructure and mechanical properties of Ti microalloyed low carbon martensitic steel Gao Hanfeng, Shi Jie, Li Xiaoyuan, Han Yun, Ma Lin HTM    doi:10.13251/j.issn.0254-6051.2014.09.004 Select Microstructure change of Nb-V composite non-quenched and tempered steel after forging Man Tinghui, He Yigui, Tan Li, Gao Peng, Zhan Zhaolin, Bao Yaozong HTM    doi:10.13251/j.issn.0254-6051.2014.09.005 Select Optimization of lanthanum oxide catalytic boronizing on surface of TC4 titanium alloy Wu Guilan, Ge Xiaolan, Xu Xiaojing, Song Zhenhua, Tao Jun, Liu Yunhui, He Xinghua HTM    doi:10.13251/j.issn.0254-6051.2014.09.006 Select Effect of tempering temperature on microstructure and properties of ZG35Cr2NiMoVTi steel Zhao Xueyang, Liu Ying, Li Xue, Guo Hong, Liu Yiwen, Li Wei HTM    doi:10.13251/j.issn.0254-6051.2014.09.007 Select Optimization of heat treatment process after vacuum carburizing of 18Cr2Ni4WA steel Xu Zijian, Wei Shaopeng, Zhou Peng, Lu Jingchen, Wang Gang HTM    doi:10.13251/j.issn.0254-6051.2014.09.008 Select Effects of heat treatment process on microstructure and hardness of TC4 titanium alloy Gan Zhanghua, Liang Yu, Wang Jinlin, Liu Jing HTM    doi:10.13251/j.issn.0254-6051.2014.09.009 Select Production of duplex stainless steel composites reinforced with TiC particles by accumulative roll bonding Zhang Hao, Ma Qin HTM    doi:10.13251/j.issn.0254-6051.2014.09.010 Select Effect of cladding current on microstructure and microhardness of Fe-Cr-Ni-Co-Mn high-entropy alloy coating by argon arc cladding Huo Wenyi, Shi Haifang HTM    doi:10.13251/j.issn.0254-6051.2014.09.011 Select Effect of strip-entry temperature on coating during continuous hot-dip galvanizing process Li Tingting, Li Tengfei, Tang Xi, Li Hualong HTM    doi:10.13251/j.issn.0254-6051.2014.09.012 Select Effect of isothermal treatment on martensitic transformation of 15-5PH stainless steel Liu Huaying, Peng Xinyuan, Hua Xiaozhen, Wei Zhenwei HTM    doi:10.13251/j.issn.0254-6051.2014.09.013 Select Hollow cathodic auxiliary ion nitriding of 38CrMoAl steel HTM    doi:10.13251/j.issn.0254-6051.2014.09.014 Select Heat treatment of the Cr, Ce micro alloying Al-Mg-Si alloy for vehicle body component Li Zengrong, Li Deyuan, Wang Qian, Xu He, Sun Aimin HTM    doi:10.13251/j.issn.0254-6051.2014.09.015 Select Influence of laser power on structure of Ni-based WC cladding layer Han Liying, Zhang Xue, Wang Yanan, Zhang Junwei, Shao Peiying, Ma Yunlong HTM    doi:10.13251/j.issn.0254-6051.2014.09.016 Select Effect of solution temperature on microstructure and wear resistance of Al-Si-Cu-Mg alloy Ren Xin, Kong Lingmei, Wang Shuhao, Zhu He, Cao Danfeng, Zhang Ruoyu HTM    doi:10.13251/j.issn.0254-6051.2014.09.017 Select Study on preparation technology of Ni nanopowders by physical methods Zhao Chenglong, Lu Wenjiang, Yu Weiyuan, Yuan Wendong, Wang Lizhi HTM    doi:10.13251/j.issn.0254-6051.2014.09.018 Select Effect of mechanical vibration on microstructure and properties of cast aluminum alloy Duan Lijun, Dong Youchang, Fan Zitian HTM    doi:10.13251/j.issn.0254-6051.2014.09.019 Select Effects of tempering temperature on microstructure and properties of 28CrNiMoMn high strength steel Xin Shijin, Dong Lisong, Dong Ying, Zhou Xishun, Li Peng, Zheng Hongwei, Ren Xiaohu HTM    doi:10.13251/j.issn.0254-6051.2014.09.020 Select Gas nitriding treatment of internal gear Guo Qiyue HTM    doi:10.13251/j.issn.0254-6051.2014.09.021 Select Static recrystallization behavior of reduced activation ferritic/martensitic steel Li Shuo, Wu Huibin, Jiang Haitao，Ren Jianwei HTM    doi:10.13251/j.issn.0254-6051.2014.09.022 Select Dynamic recrystallization behavior of Nb and V microalloyed steel Lü Shanglin, Yang Zhongmin, Xiang Jinzhong, Chen Ying, Wang Huimin HTM    doi:10.13251/j.issn.0254-6051.2014.09.023 Select Microstructure and mechanical properties of a new low-Ni stainless steels Xu Guifang, Wang Fei, Yan Yu, Chen Xiaonong, Dai Qixun HTM    doi:10.13251/j.issn.0254-6051.2014.09.024 Select Properties of laser-remelted Al-Si-Cu coating on AZ91D magnesium alloy surface Xu Jiale, Li Zhongguo, Guo Huafeng, Yan Shuai, Wang Kai, Liu Da HTM    doi:10.13251/j.issn.0254-6051.2014.09.025 Select Influence of matrix microstructure on fracture toughness of TiC/Ti-6Al-4V composite Lei Liming, Huang Guangfa, Wang Fangqiu, Guo Xianglong HTM    doi:10.13251/j.issn.0254-6051.2014.09.026 Select Friction and wear properties of SiCp/A356 composites Sun Menglong, She Kai, Wang Xiao, Xie Chunsheng HTM    doi:10.13251/j.issn.0254-6051.2014.09.027 Select Corrosion resistance of AZ91 magnesium alloys for automobile Li Meihua, Jiang Li HTM    doi:10.13251/j.issn.0254-6051.2014.09.028 Select Continuous cooling transformation curves of C-Mn-Si-Mo series low carbon bainite steel Hu Zhangwei, Xu Guang, Wang Li, Wang Min, Zhang Yi HTM    doi:10.13251/j.issn.0254-6051.2014.09.029 Select Microstructure and properties of Ni3(Al1-xSix) alloys Zhang Junxi, Guo Xiaoru, Chen Hui HTM    doi:10.13251/j.issn.0254-6051.2014.09.030 Select Effect of boron on hot ductility of Fe-36Ni invar alloy Yu Yanchong, Chen Weiqing, Zheng Hongguang HTM    doi:10.13251/j.issn.0254-6051.2014.09.031 Select Effects of doped Ti and B on microstructure and properties of high-carbon ferrochrome powder laser cladding coating Li Gang, Shen Jinze, Han Feng, Shen Yu, Wang Yan HTM    doi:10.13251/j.issn.0254-6051.2014.09.032 Select Effects of RE La on microstructure and hardness of low carbon high niobium steel in deformed condition Bai Hairui, Ren Huiping, Fang Qi, Dong Yuan, Qin Mu, Sun Wei HTM    doi:10.13251/j.issn.0254-6051.2014.09.033 Select Research progress of ultra pure ferrite stainless steel and its stress corrosion resistance Tong Lihua, Li Chunfu HTM    doi:10.13251/j.issn.0254-6051.2014.09.034 Select Digital evaluation method and application of metallic materials grain size Zhu Qianbing, Zhang Qinyi HTM    doi:10.13251/j.issn.0254-6051.2014.09.035 Select Dark dot defect on coating surface of continuously annealed hot-dip galvanized steel sheet Liu Libin, Jiang Guangrui, Ma Bingzhi, Li Weiran, Liu Huasai, Qi Chunyu HTM    doi:10.13251/j.issn.0254-6051.2014.09.036 Select Failure analysis of 20CrMnTi steel spiral rods in low air pressure rock drill Wang Zhigang, Li Yongsheng, Wang Xianzhong, Xu Yong, Sun Qilei HTM    doi:10.13251/j.issn.0254-6051.2014.09.037 Select Burst failure analysis on 20G low temperature superheater tube of biomass-fired boiler Qing Hui, Ren Yaojian, Sun Zhi HTM    doi:10.13251/j.issn.0254-6051.2014.09.038 Select Forming mechanism and counter measure of pitting on cold rolled continuous annealed strip steel surface Liu Shunxin, Zhao Zhijian, Hao Ying, Zhao Xinyi, Fu Youchang,Wang Xiuqin HTM    doi:10.13251/j.issn.0254-6051.2014.09.039 Select Cause analysis and counter measure of fracturing pump head crack Wang Changjian HTM    doi:10.13251/j.issn.0254-6051.2014.09.040 Select Analysis of defect on bearing outer ring Yang Zheng, Wu Yonggang, Wei Jianwen, Cao Jian，Wang Yunguang, Zhang Ling HTM    doi:10.13251/j.issn.0254-6051.2014.09.041 Select Application of CANopen network in pit carburizing furnace Zou Chaohui, Zong Guoliang, Pu Xiaodong, Xu Shuangkai HTM    doi:10.13251/j.issn.0254-6051.2014.09.042 Select China roadmap of heat treatment & surface modification technology HTM    Select Effect of heat treatment process on impact property of low carbon martensite steel Peng Lianggui, Liu Weijie, Wu Shutong, Liu Xianghua HTM    doi:10.13251/j.issn.0254-6051.2014.10.001 Select Effect of annealing temperature on microstructure and properties of cold-rolled Ni47Ti44Nb9 alloy sheet Zhang Zhenxing, Yin Xiangqian, Li Yanfeng, Mi Xujun HTM    doi:10.13251j.issn.0254-6051.2014.07.002 Select Effect of annealing temperature on microstructure and properties of 1100 MPa grade cold-rolled dual-phase steel Tong Tingting, Zhao Zhengzhi, Dong Rui, Yin Hongxiang, Ding Ran, YinYanjun, Li Shuangjiao HTM    doi:10.13251j.issn.0254-6051.2014.10.003 Select Effect of normalizing process on microstructure and hardness of plastic mold steel 718 Zhang Kuan, Zhen Fan, Qu Jinbo HTM    doi:10.13251j.issn.0254-6051.2014.10.004 Select Effect of Pre-aging on microstructures and mechanical properties of A357 alloy Zhang Aisheng，Huang Weimin HTM    doi:10.13251j.issn.0254-6051.2014.07.005 Select Effects of heat treatment process on grain morphology of 16Mn steel Yao Haiyun, Hu Yanhua, Wang Lixia HTM    doi:10.13251j.issn.0254-6051.2014.10.006 Select Effects of tempering time on microstructure and mechanical properties of high-temperature bearing steel Yuan Xiaohong, Zheng Shanju, Yin Shubiao, Yang Maosheng HTM    doi:10.13251/j.issn.0254-6051.2014.10.007 Select Annealing of high strength 5754 aluminum alloy for automobile Gu Peng, Chen Haiyan HTM    doi:10.13251j.issn.0254-6051.2014.10.008 Select Effect of solid solution and aging treatment on microstructure and mechanical properties of Al-Mg-Si alloy profile for automobile Yang Lin, Zou Jingxia HTM    doi:10.13251/j.issn.0254-6051.2014.10.009 Select Hardness and tensile strength variation with depth of explosion hardened hadfield steel Liu Yingbin, Hu Xiaoyan, Liu Tiansheng,Wang Fengying HTM    doi:10.13251j.issn.0254-6051.2014.10.010 Select Low-temperature mechanical properties of high strength martensitic precipitation hardening stainless steel Zhang Zhonghe, Wang Feiyu, Zhang Erkang, Niu Shan,Che Xin, Ma Guojun, Zhao Liang HTM    doi:10.13251j.issn.0254-6051.2014.10.011 Select Effect of Mo content on mechanical properties of Ti micro-alloyed low-carbon steel Wang Xiaopei, Zhao Zhengzhi, Zhao Aimin, Geng Zhida HTM    doi:10.13251j.issn.0254-6051.2014.10.012 Select Study on hot deformation behavior of a Al-containing low temperature bainitic steel Yan Zhigang, Wang Peng, Zheng Chunlei HTM    doi:10.13251j.issn.0254-6051.2014.10.013 Select Low-temperature pre-oxidation behavior of Zr-alloyed layer formed on 0Cr18Ni9Ti stainless steel Cai Hangwei, Gao Yuan, Ma Zhikang, Wang Chenglei HTM    doi:10.13251j.issn.0254-6051.2014.10.014 Select Preparation and corrosion resistance of carbonate composite conversion film on magnesium alloy Ba Zhixin, Wang Zhangzhong, Dai Yuming, Lu Mingmin, Bo Qianghao HTM    doi:10.13251/j.issn.0254-6051.2014.10.015 Select Hot deformation behaviour of low carbon Ti-Mo microalloyed martensitic steel Gao Hanfeng, Shi Jie, Li Xiaoyuan, Ma Lin HTM    doi:10.13251/j.issn.0254-6051.2014.10.016 Select Preparation and corrosion resistance of gangue siliconizing layer on commercial pure copper An Yajun, Ma Zhuang, Yang Jie, Li Zhichao HTM    doi:10.13251j.issn.0254-6051.2014.10.017 Select Bainite transformation and TRIP effect in low carbon 20Mn2SiVB steel Huo Yanqiu, Zhang Mengxian, Wang Haibo, Cai Peiyang HTM    doi:10.13251j.issn.0254-6051.2014.10.018 Select Effect of stearic acid on Ti-48at%Al powder properties prepared by high-energy ball milling Yi Feng, Cai Xiaolan, Zhou Lei, Hu Cui, Jiang Qingwei, Li Zheng,Yu Mingjun HTM    doi:10.13251j.issn.0254-6051.2014.10.019 Select Effect of Bi content on morphology and properties of Zn-Bi alloy hot-dip galvanizing coating Xie Kai, He Zhirong, Wang Yongshan, Xie Yadan,Wang Kezhi, Qi Yunhao HTM    doi:10.13251/j.issn.0254-6051.2014.10.020 Select Effect of curing agent on magnetic properties of amorphous and nanocrystalline cores Du Yu, Li Zengzhen, Chen Xiaowen, Cheng Bin, Li Zhigang HTM    doi:10.13251j.issn.0254-6051.2014.10.021 Select Low temperature superplastic extrusion forming of AZ31 magnesium alloy Liu Shoufa, Yang Hongcai, Wu Songlin HTM    doi:10.13251/j.issn.0254-6051.2014.10.022 Select Influence of lath bainite generated during ultra-rapid cooling on mechanical properties of steel plate Zou Yang, Zhang Suyuan, Gu Linhao, Liu Chunming HTM    doi:10.13251j.issn.0254-6051.2014.07.023 Select Study of toughness and microstructure for high grade X100 pipeline steel Huang Shaowen, Chen Aijiao, Huo Xiaoxin, Ma Heng, Zhou Ping, Wang Jing HTM    doi:10.13251j.issn.0254-6051.2014.10.024 Select Effect of tempering temperature on microstructure and properties of 45CrMoVE steel Peng Mengdu, Wang Limin, Zhang Xijun, Liu Zhengdong, Yang Gang, Lei Jiufang HTM    doi:10.13251j.issn.0254-6051.2014.10.025 Select Effect of 4GPa pressure treatment on plastic deformation of Cu-11.68Al alloy Wang Peng HTM    doi:10.13251j.issn.0254-6051.2014.10.026 Select Effect of tempering temperature on low temperature toughness and microstructure of low carbon bainitic pipeline steel Zhang Guodong, Song Xin, Chen Tieqiang, Li Qun, You Lijie HTM    doi:10.13251j.issn.0254-6051.2014.10.027 Select Effect of annealing process on the texture and deep drawability of CSP cold-rolled sheet Ma Shengmei, Jin Zili HTM    doi:10.13251/j.issn.0254-6051.2014.10.028 Select Effect of homogenization treatment on microstructure and properties of AZ31B magnesium alloy casting slab Huang Zhanghong, Wu Xiaodong, Fu Wenjie HTM    doi:10.13251/j.issn.0254-6051.2014.10.029 Select Effect of cryogenic treatment on creep resistance of Cu-11.74Al-0.38Ni alloy by nanoindentation testing Zhang Ronghua HTM    doi:10.13251j.issn.0254-6051.2014.10.030 Select Microstructure and property of GMAW multipass welding of Q-T high strength steel Q690D Lu Hengchang, Xing Shuqing,Chen Zhongyi,Ma Yonglin, Li Zhentuan HTM    doi:10.13251j.issn.0254-6051.2014.10.031 Select Effect of aging temperature on microstructure and properties of Ti-45Nb alloy Lin Yang, Zhang Jianguo, Wang Hong, Jing Qianying HTM    doi:10.13251/j.issn.0254-6051.2014.10.032 Select Effect of laser shock processing on residual stress of AISI202 stainless steel welding joint Qian Shaoxiang, Yin Xiaozhong, Wang Qi, Liu Bo, Leng Chengye HTM    doi:10.13251/j.issn.0254-6051.2014.10.033 Select Microstructure and mechanical properties of 15CrMoR multi-layer welding seam Hu Xiaodong, Qi Zhen, Lv Jiantao, Tian Qiang HTM    doi:10.13251j.issn.0254-6051.2014.07.034 Select Analyzing on technical evolution route of radiant tube for heating furnace Wang Jianxin,Hu Yijing, Wu Qiming, Wang Yubo, Cao Xianqing HTM    doi:10.13251j.issn.0254-6051.2014.07.035 Select Calculation model and experimental research on residual stress of annealed shrink fit Chen Haihui, Zang Guanjian, Zeng Yingying, Zhong Hantong HTM    doi:10.13251/j.issn.0254-6051.2014.10.036 Select Fracture failure analysis of high strength bolt used for large cranes Ren Zhiquan，Wang Jian，Jiang Tieliu HTM    doi:10.13251j.issn.0254-6051.2014.10.037 Select Failure analysis for fatigue fracture of tractor clutch Belleville spring Yan Zhengfeng, Li Gaihua, Xia jianxin HTM    doi:10.13251j.issn.0254-6051.2014.10.038 Select Preparation of metallographic specimen of commercial pure titanium (TA2) used for surgical implants Chang Ming，Su Jian HTM    doi:10.13251j.issn.0254-6051.2014.10.039 Select Vacuum heat treatment and distortion analysis of GCr15SiMn steel rings Wang Hongwei, Gu Min, Zhu Quanyi, Xia Yonghui, Su Xingwu, Zhao Shaofu, Li Shuangxi HTM    doi:10.13251j.issn.0254-6051.2014.10.040 Select Failure analysis of bursting 12Cr2MoWVTiB steel pipe of platen superheater for 135 MW boiler Zhu Haibao, Gao Guohong, Zhuo Renchun, Xi Jiefeng HTM    doi:10.13251/j.issn.0254-6051.2014.10.041 Select Analysis and countermeasures on cracking of outer ring of extra-large-sized self-aligning bearing Shen Weiyi, Dong Hanjie, You Shaojun, Li Zhaokun, Wu Yonggang, Chen Huizhen, YuanXin HTM    doi:10.13251j.issn.0254-6051.2014.10.042 Select China roadmap of heat treatment & surface modification technology HTM    Select Research progress in effects of surface integrity on rolling contact fatigue life of coatings Cui Huawei, Cui Xiufang, Wang Haidou, Xing Zhiguo, Jin Guo HTM    doi:10.13251/j.issn.0254-6051.2014.11.001 Select Microstructure and mechanical properties of simulated heat affected zone of large heat input welding for shipbuilding steel plate EH40 Li Xiaobao, Zhang Yu, Pan Xin HTM    doi:10.13251/j.issn.0254-6051.2014.11.002 Select Microstructure and texture of adiabatic shear band in TC4 titanium alloy Yang Liuqing, Yang Yanqing?, Chen Shuang, Luo Xian HTM    doi:10.13251/j.issn.0254-6051.2014.11.003 Select Effect of original austenite grain size on hydrogen embrittlement sensitivity of high-strength low-alloy mooring chain steel Feng Peigong, Cheng Xiaoying, Zhang Haixia HTM    doi:10.13251/j.issn.0254-6051.2014.11.004 Select Microstructure and tribological properties of hot-dipped Zn-Al-Mg alloy coating Liu Jituo, He Zhirong, Zhang Yonghong, Xie Yadan, Tian Tian, Fan Pengbin HTM    doi:10.13251/j.issn.0254-6051.2014.11.005 Select Microstructure and elevated temperature mechanical properties of a novel 310S steel Gao Fubin, Yang Jichun HTM    doi:10.13251/j.issn.0254-6051.2014.11.006 Select Microstructure, mechanical properties and performance of BCu48ZnNi brazing alloy Xue Weihua, Qi Xiaoxu, Li Zhichao HTM    doi:10.13251/j.issn.0254-6051.2014.11.007 Select Tensile fracture limit of commercial pure titanium at elevated temperature Zhou Tiezhu, Su Juanhua, Ren Fengzhang, Wei Shizhong, Chen Zhiqiang HTM    doi:10.13251/j.issn.0254-6051.2014.11.008 Select ffect of Sr additive amount on microstructure and mechanical properties of Mg-Nd-Zr alloy Peng Bo, Zhang Xiaobo, Wang Zhangzhong HTM    doi:10.13251/j.issn.0254-6051.2014.11.009 Select Effects of Nb on deformation and static recrystallization of austenite for low-carbon microalloyed steels Wan Rongchun HTM    doi:10.13251/j.issn.0254-6051.2014.11.010 Select Hydrothermal synthesis of a novel bilayer TiO2 film and its mechanism Zhang Chengkai, Zhuang Jia, Qin Haiyang, Dong Lin, Jiang Zhengtao, Zou Jian HTM    doi:10.13251/j.issn.0254-6051.2014.11.011 Select Thermoelectric properties of Al doped Bi2Te2.7Se0.3 alloy Wang Jueling, Song Shaowei HTM    doi:10.13251/j.issn.0254-6051.2014.11.012 Select Age-hardened nitriding gear steel Du Shufang, Fang Jianru, Yang Mingming HTM    doi:10.13251/j.issn.0254-6051.2014.11.013 Select Analysis on thermodynamic equilibrium phases of T91 steel with different contents of V and Nb Song Tao, Wang Zhiwu HTM    doi:10.13251/j.issn.0254-6051.2014.11.014 Select Effect of tungsten on mechanical properties of 00Cr25Ni7Mo3.5WCuN super duplex stainless steel Li Ji, Song Zhigang, Zheng Wenjie, Jiang Yehua HTM    doi:10.13251/j.issn.0254-6051.2014.11.015 Select Hot deformation behavior and processing maps of CN617 nickel-based heat-resistant alloy ingot Chen Zhengzong, Liu Zhengdong, Bao Hansheng HTM    doi:10.13251/j.issn.0254-6051.2014.11.016 Select Influence of middle temperature aging on precipitation of S31254 super austenitic stainless steel Pan Kun, Chen Haitao, Lang Yuping, Lu Dehong, Liu Ming HTM    doi:10.13251/j.issn.0254-6051.2014.11.017 Select Effect of aging on superelasticity of nickel-titanium shape memory alloy wires Yuan Zhishan, Wu Yanhua, Wang Yonghui, Shi Shiwei, Zhou Jin, Miao Weidong, Zhu Ming HTM    doi:10.13251/j.issn.0254-6051.2014.11.018 Select Effect of aging temperature on notched tensile strength of ultra-high strength stainless steel Zhu Hongfei, Ding Yali, Yang Zhuoyue, Zhao Kunyu HTM    doi:10.13251/j.issn.0254-6051.2014.11.019 Select Effect of defocusing amount of laser heat treatment on microstructure and hardness of high speed steel roll Shi Dongsheng,Huang Genzhe,Li Qing, Zhang Luyang HTM    doi:10.13251/j.issn.0254-6051.2014.11.020 Select Effects of heat treatment on microstructure and mechanical properties of high Ni-Cr centrifugal composite cast ductile iron rolls Ding Meiliang, Yu Baojun, Sun Lin, Yu Xiaojun HTM    doi:10.13251/j.issn.0254-6051.2014.11.021 Select Effects of heat treatment on microstructure and mechanical properties of TC4 alloy plates Fu Wenjie, Xie Yingjie, Gao Weina, Wu Xiaodong, Dang Peng HTM    doi:10.13251/j.issn.0254-6051.2014.11.022 Select Effect of solidification cooling condition on corrosion resistance of magnesium alloy Wang Xiangbo, Ma Youping, Yang Lei, Liu Ruizhe, Cheng Gang HTM    doi:10.13251/j.issn.0254-6051.2014.11.023 Select Effect of heat treatment on microstructure and mechanical properties of G17CrMo5-5 steel TG142.33 HTM    doi:10.13251/j.issn.0254-6051.2014.11.024 Select Process parameters and influence of rare earth on plasma nitrocarburizing of SDC99 Steel Feng Xi, Yang Haopeng, Wu Xiaochun HTM    doi:10.13251/j.issn.0254-6051.2014.11.025 Select Effect of electric pulse time and cooling way on solid nitrocarburization of 1Cr18Ni9Ti steel Sun Yuling, Liu Xingjiang, Wang Jianzhong HTM    doi:10.13251/j.issn.0254-6051.2014.11.026 Select Effect of heat treatment on austenite grain size of SAE4320 steel Xu Shangcheng, Zhou Lixin, Zhang Zhicheng, Li Desheng, Wang Zhigang, Xiao Aiping HTM    doi:10.13251/j.issn.0254-6051.2014.11.027 Select Heat treatment of GH4698 alloy Man Jiao, Cong Tao, Sun Fumin, Xing Yurong, Zhang Xiaowu, Liu Changjiang HTM    doi:10.13251/j.issn.0254-6051.2014.11.028 Select Annealing process of Gr.38 titanium alloy Li Yonglin，Yuan Hongjun，Zhu Baohui，Meng Xin，Ren Guangning，Chen Shengchuan，Shen Lihua，Tang Shouquan HTM    doi:10.13251/j.issn.0254-6051.2014.11.029 Select Effect of cutting methods on direct quenched steel plate Jiang Hongsheng, Zhang Suoquan, Han Jianhong HTM    doi:10.13251/j.issn.0254-6051.2014.11.030 Select Hardenability prediction of SCSiMn2H cast steel with boron Xie Lingzhen, Wang Zhong, Zhou Xinguo, Wang Meng, Feng Xianlei HTM    doi:10.13251/j.issn.0254-6051.2014.11.031 Select Forging residual heat isothermal annealing for automobile gear products He Xiaokun，Bai Yunling HTM    doi:10.13251/j.issn.0254-6051.2014.11.032 Select Heat treatment process improvement of M42 high speed steel Zhang Jianhong, Liu Jingxin HTM    doi:10.13251/j.issn.0254-6051.2014.11.033 Select Effect of quenching and tempering on nitrided case depth of structural steel Liu Longming HTM    doi:10.13251/j.issn.0254-6051.2014.11.034 Select Temperature and stress field numerical simulation of main pipeline for AP1000 nuclear power Tang Longshu, Zhou Xianliang, Hua Xiaozhen, Peng Xinyuan, Cui Xia, Song Longfei HTM    doi:10.13251/j.issn.0254-6051.2014.11.035 Select Numerical investigation on effects of burner geometric parameters on flue gas self-recirculation performance Hu Yuanqing, Jiang Liqiao,Yang Weibin, Zhao Daiqing HTM    doi:10.13251/j.issn.0254-6051.2014.11.036 Select Temperature field simulation of pulsed laser renovating process on thin aluminum alloy plate with linear damage Wu Zhikui, Wang Hongyu, Cheng Man, Yuan Xiaoming, Sun Chongchao HTM    doi:10.13251/j.issn.0254-6051.2014.11.037 Select Crack analysis of output shaft test pieces Hu Huiling，Lin Chuxin HTM    doi:10.13251/j.issn.0254-6051.2014.11.038 Select Failure analysis of speed reducer bevel shaft crack Bo Wenli HTM    doi:10.13251/j.issn.0254-6051.2014.11.039 Select Leakage analysis of DN350 insulation joint on gas pipeline Liu Yinglai HTM    doi:10.13251/j.issn.0254-6051.2014.11.040 Select Speckle formation mechanism on gas-nitrided crankshaft surface Cong Jianchen, Ni Peixiang, Sun Jun HTM    doi:10.13251/j.issn.0254-6051.2014.11.041 Select Laboratory management for heat treatment quality test based on ISO/IEC 17025: 2005 standard Shi Yousen HTM    doi:10.13251/j.issn.0254-6051.2014.11.042 Select China roadmap of heat treatment & surface modification technology HTM    Select Effect of hot deformation process on banded structure of SAE8620H gear steel Ouyang jianxiong, Min Yongan, Shao Guangjie, Xu Minghua, Sun Hongping, Gu Tie, Cao Hongfu, Fu Jinming HTM    doi:10.13251/j.issn.0254-6051.2014.12.001 Select Effects of straightening temperature on transformation behavior and mechanical properties of superelastic Ti-50.8Ni alloy wire Ge Yuan, Chen Kangmin, Zhang Qinglai, Jiang Zhen, Lei Yajun, Cao Jimin HTM    doi:10.13251/j.issn.0254-6051.2014.12.002 Select Influence of warm-forming parameters on grain size and uniformity of hot heading GCr15 steel ball-billet Ao Ying, Wang Hongbin HTM    doi:10.13251/j.issn.0254-6051.2014.12.003 Select Aging treatment of 7085 aluminum alloy extruded bars containing Sr Wei Jian, Xu Xiaojing, Wu Yao, Deng Ping’an, Fan Yazhou HTM    doi:10.13251/j.issn.0254-6051.2014.12.004 Select Effects of micro-arc oxidation process parameters on thickness and surface morphology of oxide film on the surface of Ti6Al4V titanium alloy Rong Hui, Ma Fengcang, Liu Ping, Li Wei, Liu Xinkuan, Chen Xiaohong, He Daihua HTM    doi:10.13251/j.issn.0254-6051.2014.12.005 Select Effects of solution treatment on microstructure and hardness of heat-resistant alloy CN617 Chen Zhengzong, Liu Zhengdong, Bao Hansheng HTM    doi:10.13251/j.issn.0254-6051.2014.12.006 Select Effects of multi-heating forming on microstructure and mechanical properties of TA15 titanium alloy complicated forging Wang Weihong, Xiong Yunsen HTM    doi:10.13251/j.issn.0254-6051.2014.12.007 Select Effect of pulse nitriding temperature on corrosion resistance of 38CrMoAlA steel nitrided layer Lu Xufeng, Pan Yingjun, Liu Jing HTM    doi:10.13251/j.issn.0254-6051.2014.12.008 Select Influence of solution temperature on microstructure and pitting corrosion of 2205 duplex stainless steel Chen Xingrun, Pan Jixiang HTM    doi:10.13251/j.issn.0254-6051.2014.12.009 Select Research on preparation process of titanium target used for sputtering and coating Gao Weina, Dang Peng, Fu Wenjie, Zhang Qing, Xing Qiuli HTM    doi:10.13251/j.issn.0254-6051.2014.12.010 Select Energy effect of TC4 alloy biological film prepared by micro-arc oxidation Wang Fengbiao, Dong Shujing, Liu Jun, Zhang Xiuyan HTM    doi:10.13251/j.issn.0254-6051.2014.12.011 Select Investigation on isothermal quenching and tempering process of 42CrMo steel Wen Chao, Dong Wen, Liang Huilei, Sun Mingyan HTM    doi:10.13251/j.issn.0254-6051.2014.12.012 Select Hot working process of high-performance GCr15 steel ball screw Fan Wei, Wang Keshe, Zha Chuliang HTM    doi:10.13251/j.issn.0254-6051.2014.12.013 Select Heat treatment of large-sized thin wall welding 30CrMoA steel shell Li Jingmin, Huang Wenrong, Li Chang’an, Li Fengchun, Huang Shuke HTM    doi:10.13251/j.issn.0254-6051.2014.12.014 Select Thermal mechanical treatment of 42CrMo steel middle-size forgins Liu Junping, Shang Liping HTM    doi:10.13251/j.issn.0254-6051.2014.12.015 Select Surface nitriding treatment of zirconium alloy R60705 Luo Yang, Lin Qingxuan HTM    doi:10.13251/j.issn.0254-6051.2014.12.016 Select Vaccum carburizing of TC11 titanium alloy Song Huahua, Yu Yun, Liu Huihe, Wu Yonggang, Li Fuwei HTM    doi:10.13251/j.issn.0254-6051.2014.12.017 Select Study on cleaning technology of quenching oil Li Haidong, Zhu Xiaohong, Zong Guoliang, Pu Xiaodong HTM    doi:10.13251/j.issn.0254-6051.2014.12.018 Select Continuous cooling transformation of supercooled austenite for hot rolled strip steel containing Nb Lu Pingping, Tang Guangbo, Shi Qingnan, Jiang Yi HTM    doi:10.13251/j.issn.0254-6051.2014.12.019 Select Impact properties of Al-Mg-Mn-Er-Zr alloy at cryogenic temperature Wang Xudong, Chen Longfei HTM    doi:10.13251/j.issn.0254-6051.2014.12.020 Select High temperature oxidation resistance of a new Cr18Ni31Al alloy Cheng Xiaonong, Zheng Qi, Li Dongsheng, Chen Ming, Zhao Chunfeng, Wang Zhidong, Gao Pei, Du Hong HTM    doi:10.13251/j.issn.0254-6051.2014.12.021 Select Dynamic mechanical properties of three kinds of ultrahigh strength steel Qin Yurong, Su Jie, Yang Zhuoyue, Ding Yali, Ning Jing, Liu Jianxiong HTM    doi:10.13251/j.issn.0254-6051.2014.12.022 Select Influence of Cr content on phase composition and microwave absorbing properties of Er2Fe17-xCrx alloy Zeng Weidong, Liu Xing, Pan Shunkang, Cheng Lichun, Lin Peihao HTM    doi:10.13251/j.issn.0254-6051.2014.12.023 Select Microstructure and properties of weld seam by self-shielded flux-cored wire Fan Yuran, Xu Changxue, Li Xueda, Wang Feng, Sun Qiaofei HTM    doi:10.13251/j.issn.0254-6051.2014.12.024 Select CCT curves of economical X80 pipeline steel Wang Changchang, Liu Qingyou, Yong Qilong, Miao Chengliang, Niu Tao HTM    doi:10.13251/j.issn.0254-6051.2014.12.025 Select High temperature oxidation resistance of aluminized coating thermal-sprayed on Ti-Al alloy Zhi Yan, Chang Xia HTM    doi:10.13251/j.issn.0254-6051.2014.12.026 Select Surface performance of 316L austenite stainless steel after low temperature gas carburizing Gao Feng, Gong Jianming, Jiang Yong, Rong Dongsong HTM    doi:10.13251/j.issn.0254-6051.2014.12.027 Select Microstrcture and wear resistance of TiB2-40Ni coating sprayed by supersonic flame Chen Xiao, Zhang Xiaomin, Chen Long, Guan Xiaoxiao, Huang Shuowen, Fan Yaqiao, Duan Xiaohua HTM    doi:10.13251/j.issn.0254-6051.2014.12.028 Select Microstructure and mechanical properties of aged T/P92 steel Li Bin, Xu Xiaowei HTM    doi:10.13251/j.issn.0254-6051.2014.12.029 Select Effect of Ca addition on microstructure of Mg-Al-Zn alloy for automobile Zheng Yipeng HTM    doi:10.13251/j.issn.0254-6051.2014.12.030 Select Microstructure and properties of laser clad Al-Si coating of AZ31 magnesium alloys for automobile Yang Tao, Song Dandan HTM    doi:10.13251/j.issn.0254-6051.2014.12.031 Select Room temperature deformation behavior of Mg-Al-Sn alloy for automobile Yang Lin HTM    doi:10.13251/j.issn.0254-6051.2014.12.032 Select Phase composition of electric pulse treated HSi59-2.5 silicon brass after heat treatment Zhao Zuofu, Qi Jingang, Wang Jiayi, Wang Jianzhong HTM    doi:10.13251/j.issn.0254-6051.2014.12.033 Select Investigation of lead-free glass-ceramic oxidation-resistant coating for heat processing of Ti-6Al-4V titanium alloy Shi Yousen, Wang Tao HTM    doi:10.13251/j.issn.0254-6051.2014.12.034 Select Simulation of gas flow and heat transfer in the full hydrogen bell type annealing furnace Yang Peipei, Wen Zhi, Dou Ruifeng HTM    doi:10.13251/j.issn.0254-6051.2014.12.035 Select Color metallographic quantitative analysis method of TRIP steel microstructure Cai Xiaowen, Chen Xingyuan, Zhou Qiang, Yang Xiongfei, Jiang Rengui HTM    doi:10.13251/j.issn.0254-6051.2014.12.036 Select Microstructure and defect analysis of 20CrNi2Mo Boron-bearing steel gear after carburizing and quenching Fan Yang, Yang Sheng, Chen Jinlong, Wu Guoqing, Wu Gang HTM    doi:10.13251/j.issn.0254-6051.2014.12.037 Select Corrosion cause analysis of cold rolled steel sheet for refrigerator side plate Song Jinying, He Lixin, Jiao Jinmin HTM    doi:10.13251/j.issn.0254-6051.2014.12.038 Select Cracking analysis of girth weld Zhang Liang, Zhang Guangli, Yang Fengping, Wang Ke HTM    doi:10.13251/j.issn.0254-6051.2014.12.039 Select Failure analysis of 60Si2MnA coil spring Zhang Zhenggui, Li Ping, Li Shanshan, Li Zhanku, Li Mengqin, Zhang Ruifeng HTM    doi:10.13251/j.issn.0254-6051.2014.12.040 Select Failure analysis of 20CrMnMoA steel transmission gear Liu Min, Zhang Youdeng, Wang Junlin, Zhang Ping HTM    doi:10.13251/j.issn.0254-6051.2014.12.041 Select Cracking causes of 42CrMo thick wall steel pipe Wang Changjian HTM    doi:10.13251/j.issn.0254-6051.2014.12.042 Select Causes of magnetic mark on end face of GCr18Mo steel bearing ring Zhang Ling, Li Zhaokun, Yang Zheng, Wei Jianwen, Chen Zhishan, Shen Weiyi HTM    doi:10.13251/j.issn.0254-6051.2014.12.043 Select Localization of temperature sensor and its application Wang Kuihan, Zhang Zhipeng HTM    doi:10.13251/j.issn.0254-6051.2014.12.044 Select Development of equipment technique requirement and evaluation system of cleaning and energy saving heat treatment Li Qiao, Xu Yueming, Dong Xiaohong, Hu Xiaoli, Xiang Jianhua, Wang Guangsheng HTM    doi:10.13251/j.issn.0254-6051.2014.12.045 Select China roadmap of heat treatment & surface modification technology HTM