铌对高强度51CrV钢组织及性能的影响

doi:10.13251/j.issn.0254-6051.2021.01.018

金属热处理 ›› 2021, Vol. 46 ›› Issue (1): 92-96.DOI: 10.13251/j.issn.0254-6051.2021.01.018

铌对高强度51CrV钢组织及性能的影响

王佳敏¹, 曹宇¹, 向浩亮¹, 曹祥智¹, 宋新莉¹, 刘中柱²

1.武汉科技大学省部共建耐火材料与冶金国家重点实验室,湖北武汉 430081;
2.中信微合金化技术中心,北京 100004

收稿日期:2020-06-10 出版日期:2021-01-25 发布日期:2021-01-26
通讯作者: 宋新莉,教授,博士,E-mail:xlsong@wust.edu.cn
作者简介:王佳敏(1998—),女,学士,主要研究方向为高性能钢铁材料强韧化,E-mail:1349812402@qq.com。
基金资助:
湖北省大学生创新创业训练计划(201810488101);中信-CBMM基金(2017FWNB-3082)

Effect of niobium on microstructure and properties of high strength 51CrV steel

Wang Jiamin¹, Cao Yu¹, Xiang Haoliang¹, Cao Xiangzhi¹, Song Xinli¹, Liu Zhongzhu²

1. State Key Lab of Refractory Materials and Metallurgy,Wuhan University of Science and Technology,Wuhan Hubei 430081,China;
2. CITIC-CBMM Microalloying Center,Beijing 100004,China

Received:2020-06-10 Online:2021-01-25 Published:2021-01-26

摘要/Abstract

摘要： 借助光学显微镜(OM)、扫描电镜(SEM)、透射电镜(TEM)与万能拉伸试验机等研究了铌元素的添加对51CrV钢奥氏体晶粒尺寸、淬火和回火组织以及力学性能的影响。结果表明:0Nb和0.02wt%Nb试验钢的奥氏体平均晶粒尺寸分别为10.0 μm和3.1 μm,添加0.02wt%Nb的51CrV钢奥氏体晶粒尺寸显著细化、板条马氏体尺寸减小,回火过程中析出碳化物的尺寸更细,两种试验钢850 ℃淬火+400 ℃回火后,屈服强度均大于1300 MPa,抗拉强度均大于1400 MPa。而加入0.02wt%Nb试验钢由于晶粒细化,断后伸长率达到9.50%,不含Nb试验钢伸长率为8.69%。51CrV钢添加微量的Nb元素在保证高强度的同时,塑性得到提高,综合性能比无Nb钢优异。

关键词: 51CrV钢, 铌, 组织, 力学性能

Abstract: Effect of niobium addition on austenite grain size,quenching and tempering microstructure and mechanical properties of 51CrV steel was observed by means of optical microscope,scanning electron microscope,transmission electron microscope and universal tensile testing machine.The results show that the austenite grain size of Nb free and 0.02wt%Nb steels is 10.0 μm and 3.1 μm,respectively.The grain size of 51CrV steel with Nb element is significantly refined,the size of lath martensite reduces,and the size of carbide precipitated during tempering is finer.After quenching at 850 ℃ and tempering at 400 ℃,both the yield strength and tensile strength of the two tested steels are greater than 1300 MPa and 1400 MPa,respectively.The elongation of 0.02wt%Nb tested steel increases to 9.50% because of the grain refinement.And the elongation of Nb free steel is 8.69%.51CrV steel microalloyed by Nb element has both high strength and high plasticity and its comprehensive properties are better than Nb-free steel.

Key words: 51CrV steel, niobium, microstructure, mechanical properties

中图分类号:

TG156.1

王佳敏, 曹宇, 向浩亮, 曹祥智, 宋新莉, 刘中柱. 铌对高强度51CrV钢组织及性能的影响[J]. 金属热处理, 2021, 46(1): 92-96.

Wang Jiamin, Cao Yu, Xiang Haoliang, Cao Xiangzhi, Song Xinli, Liu Zhongzhu. Effect of niobium on microstructure and properties of high strength 51CrV steel[J]. Heat Treatment of Metals, 2021, 46(1): 92-96.

参考文献

[1] 王伟,朱林,胡平,等.热处理对高速列车用51CrV4弹簧钢力学性能的影响[J].金属热处理,2010,35(2):58-62.
Wang Wei,Zhu Lin,Hu Ping,et al.Effect of heat treatment on mechanical properties of 51CrV4 spring steel for high speed trains[J].Heat Treatment of Metals,2010,35(2):58-62.
[2] 邢献强.国产汽车用低合金弹簧钢线材的现状[J].金属制品,2010,36(6):34-39.
Xing Xianqiang.Present situation of low alloy spring steel wire rod for domestic automobile[J].Metal Product,2010,36(6):34-39.
[3] 韩伟旗,张素萍,郑永瑞,等.轿车悬架簧用弹簧钢线材的生产实践[J].金属制品,2009,35(5):31-33.
Han Weiqi,Zhang Suping,Zheng Yongrui,et al.Production practice of wire rod for automobile suspension spring[J].Metal Products,2009,35(5):31-33.
[4] 丁灿灿,曹燕光,杨俊伟,等.奥氏体化温度对51CrV4钢组织及疲劳性能的影响[J].钢铁研究学报,2018,30(12):991-997.
Ding Cancan,Cao Yanguang,Yang Junwei,et al.Effect of austenitizing,temperature on microstructure and fatigue properties of 51CrV4 steel[J].Journal of Iron and Steel Research,2018,30(12):991-997.
[5] 罗迪强,谢飞鸣,汪志刚,等.高品质弹簧钢51CrV4的高温塑性研究[J].材料导报,2016,30(6):90-94.
Luo Diqiang,Xie Feiming,Wang Zhigang,et al.Hot ductility behavior of high quality 51CrV4 spring steels[J].Materials Reports,2016,30(6):90-94.
[6] 曾斌,李昭东,孙新军,等.新型锯片基体用钢51CrV4的研究与开发[J].钢铁,2016,51(2):78-83.
Zeng Bin,Li Zhaodong,Sun Xinjun,et al.Research and development of 51CrV4 as a novel welded saw blade steel[J].Iron and Steel,2016,51(2):78-83.
[7] 宫德海,马永涛,王小军,等.淬火温度对51CrV4弹簧钢组织及性能的影响[J].河北冶金,2019(12):20-23.
Gong Dehai,Ma Yongtao,Wang Xiaojun,et al.Effect of quenching temperature on structure and properties of 51CrV4 spring steel[J].HeBei Metallurgy,2019(12):20-23.
[8] Leire G S,Beatriz L,Beatriz P,et al.Effect of coiling conditions on the strengthening mechanisms of Nb microalloyed steels with high Ti addition levels[J].Materials Science and Engineering A,2019,748:386-395.
[9] Dey I,Chandra S,Saha R,et al,Effect of Nb micro-alloying on microstructure and properties of thermomechanically processed high carbon pearlitic steel[J].Materials Characterization,2018,140:45-54.
[10] 沈奎,江卓俊,于学森,等.微合金化铌钒对高碳钢组织转变影响[J].特殊钢,2019,40(4):62-65.
Shen Kui,Jiang Zhuojun,Yu Xuesen,et al.Effect of Nb-V microalloying on phase transformation behavior of high carbon steel[J].Special Steel,2019,40(4):62-65.
[11] 孙曼丽,江波,陈刚,等.Nb微合金化对高碳钢组织和性能的影响[J].金属热处理,2016,41(4):71-74.
Sun Manli,Jiang Bo,Chen Gang,et al.Efffect of Nb microalloying on microstructure and mechanical properties of high carbon steel[J].Heat Treatment of Metals,2016,41(4):71-74.
[12] 雍歧龙.钢铁材料中的第二相[M].北京:冶金工业出版社,2006.
[13] 胡保全.金属热处理原理与工艺[M].北京:中国铁道出版社,2017.
[14] 吴斯,李秀程,张娟,等.Nb对中碳钢相变和组织细化的影响[J].金属学报,2014,50(4):400-408.
Wu Si,Li Xiucheng,Zhang Juan,et al.Effect of Nb on transformation and microstructure refinement in medium carbon steel[J].Acta Metallurgica Sinica,2014,50(4):400-408.
[15] 吴丹.时速300 km以上高铁制动盘用钢的成分、组织与性能研究[D].北京:北京科技大学,2018.
[16] 李元元,蔡东东,程晓敏,等.热处理工艺对51CrV4弹簧钢组织与性能的影响[J].材料热处理学报,2018,39(7):55-63.
Li Yuanyuan,Cai Dongdong,Cheng Xiaomin,et al.Effect of heat treatment process on microstructure and properties 51CrV4 spring steel[J].Transactions of Materials and Heat Treatment,2018,39(7):55-63.
[17] Huang H H,Yang G W,Zhao G,et al.Effect of Nb on the microstructure and properties of Ti Mo microalloyed high strength ferrite steel[J].Materials Science and Engineering A,2018,736:148-155.
[18] 程四华,周德,孔祥涛,等.Nb微合金化对高碳钢线材组织和性能的影响[J].轧钢,2017,34(3):7-11.
Chen Sihua,Zhou De,Kong Xiangtao,et al.Effect of microstructure and properties of Nb microalloyed high carbon steel wire rod[J].Steel Rolling,2017,34(3):7-11.
[19] 韩孝永.铌、钒、钛在微合金钢中的作用[J].宽厚板,2006,12(1):39-41.
Han Xiaoyong.Functions of Nb,V and Ti in micro-alloyed steel[J].Wide and Heavy Plate,2006,12(1):39-41.

铌对高强度51CrV钢组织及性能的影响

Effect of niobium on microstructure and properties of high strength 51CrV steel

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王玉岱, 刘洋, 朱言言, 田象军, 程序, 冉先喆, 钱婷婷. 热处理对复合制造AerMet100超高强度钢组织均匀性与拉伸性能的影响[J]. 金属热处理, 2022, 47(4): 1-9.
[2]	张子延, 陈君, 陈晓亚, 李全安, 刘建鑫. 固溶时效处理对Mg-4Sm-3Gd-0.5Zr合金显微组织和耐蚀性能的影响[J]. 金属热处理, 2022, 47(4): 10-16.
[3]	梁恩溥, 徐乐, 杨勇, 王毛球. 添加Al、Cu对40CrNi3MoV钢组织和力学性能的影响[J]. 金属热处理, 2022, 47(4): 17-23.
[4]	祁晓亮, 李岩, 定巍, 赵增武. 含Al中锰TRIP钢原始组织对临界退火后组织与力学性能的影响[J]. 金属热处理, 2022, 47(4): 24-29.
[5]	陈保安, 张静媛, 祝志祥, 韩钰, 潘学东, 张磊, 陈素红. 化学成分对高强Al-Mg-Si合金组织和性能的影响[J]. 金属热处理, 2022, 47(4): 30-38.
[6]	陈东俊, 李广阳, 刘刚. 时效处理对AlSi9Cu3压铸铝合金组织和力学性能的影响[J]. 金属热处理, 2022, 47(4): 53-56.
[7]	陈连生, 张露友, 田亚强, 杨子旋, 李红斌, 潘红波, 魏英立. 低碳高强舰船用钢的CCT曲线及其组织性能[J]. 金属热处理, 2022, 47(4): 63-68.
[8]	贾昌远, 霍元明, 何涛, 霍存龙, 刘克然. 40CrNiMo钢高温拉伸变形行为和组织演变规律[J]. 金属热处理, 2022, 47(4): 69-74.
[9]	王云龙, 余伟, 张昳, 史佳新, 李明辉. 奥氏体化温度对贝氏体钢等温转变及力学性能的影响[J]. 金属热处理, 2022, 47(4): 80-85.
[10]	刘丽艳, 毕文珍, 韦习成. Mn元素对热冲压钢镀锌层组织演变的影响[J]. 金属热处理, 2022, 47(4): 93-99.
[11]	骆再斌, 范子泽, 彭振. 轻质高熵合金的研究进展[J]. 金属热处理, 2022, 47(4): 100-107.
[12]	付锡彬, 陈子豪, 张可, 赵时雨, 孙新军, 朱正海, 梁小凯, 雍岐龙. 淬火温度对高Ti低合金耐磨钢组织及力学性能的影响[J]. 金属热处理, 2022, 47(4): 122-127.
[13]	宿鹏吉, 麻永林, 董丽丽, 杨雪峰. 磁场预退火处理对CGO钢组织与织构的影响[J]. 金属热处理, 2022, 47(4): 128-132.
[14]	李立, 曾艳, 吴晓春. 4Cr5Mo2VCo钢的热处理工艺优化[J]. 金属热处理, 2022, 47(4): 133-140.
[15]	吕杰晟, 宋志刚, 何建国, 丰涵, 郑文杰, 朱玉亮. S32205双相不锈钢冷轧退火组织转变及强塑化机理分析[J]. 金属热处理, 2022, 47(4): 141-145.