激光熔覆Al0.1CoCrFeNi高熵合金涂层的组织和性能

doi:10.13251/j.issn.0254-6051.2020.12.031

金属热处理 ›› 2020, Vol. 45 ›› Issue (12): 155-159.DOI: 10.13251/j.issn.0254-6051.2020.12.031

激光熔覆Al_0.1CoCrFeNi高熵合金涂层的组织和性能

范佳承, 刘宁, 周慧玲, 张兴华, 牛牧野, 常皓博, 耿逸凡

江苏科技大学材料科学与工程学院, 江苏镇江 212003

收稿日期:2020-07-26 出版日期:2020-12-25 发布日期:2021-01-14
通讯作者: 刘宁,教授,E-mail: jkdln@126.com
作者简介:范佳承(1995—),男,硕士研究生,主要研究方向为高熵合金涂层,E-mail: 18796089360@163.com。
基金资助:
国家自然科学基金(51805227)

Microstructure and properties of Al_0.1CoCrFeNi high entropy alloy coating fabricated by laser cladding

Fan Jiacheng, Liu Ning, Zhou Huiling, Zhang Xinghua, Niu Muye, Chang Haobo, Geng Yifan

School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang Jiangsu 212003, China

Received:2020-07-26 Online:2020-12-25 Published:2021-01-14

摘要/Abstract

摘要： 采用激光熔覆技术在H13钢表面制备了Al_0.1CoCrFeNi高熵合金涂层。结果表明,涂层具有单相FCC结构,涂层与基材结合处组织为柱状晶,其他区域为等轴晶;涂层截面显微硬度最高可达560.2 HV0.5,约为基体硬度的2.5倍。涂层表现出明显优于基材的抗热冲击性能。在600 ℃和800 ℃下分别循环50次后涂层均未产生裂纹,但是在1000 ℃高温下循环7次后,基体断裂,而涂层及涂层与基体结合处并没有明显的裂纹。涂层的摩擦因数和磨损率均低于基材,分析表明涂层以氧化磨损为主,而基材的磨损机理为氧化磨损伴随疲劳磨损的混合机制。

关键词: 高熵合金涂层, 微观组织, 抗热冲击性能, 耐磨性能

Abstract: Al_0.1CoCrFeNi high-entropy alloy coating on the surface of H13 steel was prepared by using laser cladding technology. The results show that the structure of Al_0.1CoCrFeNi high-entropy alloy coating is single phase FCC type, showing as columnar grains at the junction of coating and substrate steel, while as equiaxed grains in other regions; and the maximum microhardness on the coating section is up to 560.2 HV0.5, which is about 2.5 times of that of the substrate. The coating exhibits better thermal shock resistance than that of the substrate. No cracks are found in the coating after thermal shocking at 600 ℃ and 800 ℃ for 50 cycles, but when undergone 7 cycles at a high temperature of 1000 ℃, the steel substrate is broken while there is no obvious cracks in the coating and the junction zone of coating and substrate. Both the friction coefficient and wear rate of the coating are lower than that of the substrate, which indicates oxidation wear is the main wear mechanism for the coating, while the substrate steel shows mixed mechanisms of oxidation wear and fatigue wear.

Key words: high entropy alloy coating, microstructure, thermal shock resistance, wear resistance

中图分类号:

TG146.6

范佳承, 刘宁, 周慧玲, 张兴华, 牛牧野, 常皓博, 耿逸凡. 激光熔覆Al_0.1CoCrFeNi高熵合金涂层的组织和性能[J]. 金属热处理, 2020, 45(12): 155-159.

Fan Jiacheng, Liu Ning, Zhou Huiling, Zhang Xinghua, Niu Muye, Chang Haobo, Geng Yifan. Microstructure and properties of Al_0.1CoCrFeNi high entropy alloy coating fabricated by laser cladding[J]. Heat Treatment of Metals, 2020, 45(12): 155-159.

参考文献

[1] Yeh J W, Chen S K, Lin S J, et al.Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes[J]. Advanced Engineering Materials, 2004, 6(5): 299-303.
[2] Cantor B, Chang I T H, Knight P, et al. Microstructural development in equiatomic multicomponent alloys[J]. Materials Science and Engineering A, 2004, 375: 213-218.
[3] Hsu C Y, Sheu T S, Yeh J W, et al.Effect of iron content on wear behavior of AlCoCrFe_xMo_0.5Ni high-entropy alloys[J]. Wear, 2010, 268: 653-659.
[4] Hsu C Y, Wang W R, Tang W Y, et al.Microstructure and mechanical properties of new AlCo_xCrFeMo_0.5Ni high-entropy alloys[J]. Advanced Engineering Materials, 2010, 12: 44-49.
[5] Liu N, Ding W, Wang X J.Phases, microstructures and properties of multi-component FeCoNi-based alloys[J]. Materials Science and Technology, 2020, 36: 654-660.
[6] 丁文, 王小京, 刘宁, 等. CoCrFeMnNi高熵合金作为中间层的铜/304不锈钢扩散连接研究[J]. 金属学报, 2020, 56(8): 1084-1090.
Ding Wen, Wang Xiaojing, Liu Ning, et al.Diffusion bonding of copper and 304 stainless steel with an interlayer of CoCrFeMnNi high-entropy alloy[J]. Acta Metallurgica Sinica, 2020, 56(8): 1084-1090.
[7] Liu N, Ding W, Fan J C, et al.Microstructure evolution, phase formation and properties of Fe25Ni25Co_xMo_y multi-principal- component alloys[J]. Metallurgical and Materials Transactions A, 2020, 51: 2990-2997.
[8] Tian L H, Feng Z K, Xiong W, et al.Microstructure, microhardness, and wear resistance of AlCoCrFeNiTi/Ni60 Coating by plasma spraying[J]. Coating, 2018, 8: 112-125.
[9] 黄纯可, 李伟, 刘平, 等. 磁控溅射法制备Al_xCoCrFeNi高熵合金薄膜的微观组织和力学性能研究[J]. 功能材料, 2017, 48(6): 6144-6148.
Huang Chunke, Li Wei, Liu Ping, et al.Study on microstructure and mechanical properties of Al_xCoCrFeNi high entropy alloy thin films prepared by magnetron sputtering[J]. Journal of Functional Materials, 2017, 48(6): 6144-6148.
[10] 林鑫, 黄卫东. 高性能金属构件的激光增材制造[J]. 中国科学: 信息科学, 2015, 45(9): 1111-1126.
LinXin, Huang Weidong. Laser additive manufacturing of high-performance metal components[J]. Scientia Sinica (Informationis), 2015, 45(9): 1111-1126.
[11] Zhang H, Pan Y, He Y Z.Effects of annealing on the microstructure and properties of 6FeNiCoCrAlTiSi high-entropy alloy coating prepared by laser cladding[J]. Journal of Thermal Spray Technology, 2011, 20(5): 1049-1055.
[12] Ye X Y, Ma M X, Cao Y X L, et al. The property research on high-entropy alloy Al_xFeCoNiCuCr coating by laser cladding[J]. Physics Procedia, 2011, 12: 303-312.
[13] 郑必举, 蒋业华, 胡文, 等. 激光熔覆Al_xCrFeCoCuNi高熵合金涂层的显微组织与性能研究[J]. 功能材料, 2016, 47(6): 6167-6172.
Zheng Biju, Jiang Yehua, Hu Wen, et al.Microstructure and properties of laser cladding Al_xCrFeCoCuNi high entropy alloy on AISI 1045 steel[J]. Applied Laser, 2016, 47(6): 6167-6172.
[14] 彭振, 杜文栋, 刘宁, 等. 激光熔覆FeCoCrCuNiMoVSiB高熵合金涂层的制备和性能研究[J]. 江苏科技大学学报, 2017, 31(1): 35-39.
Peng Zhen, Du Wendong, Liu Ning, et al.Preparation and properties of laser cladding FeCoCrCuNiMoVSiB high entropy alloy coating[J]. Journal of Jiangsu University of Science and Technology(Natural Science Edition), 2017, 31(1): 35-39.
[15] Barin I.Thermochemical Data for Pure Substances[M]. 3rd. Weinheim, Germany: American Chemical Society and American Institute of Physics for National Bureau of Standards,1995.

激光熔覆Al_0.1CoCrFeNi高熵合金涂层的组织和性能

Microstructure and properties of Al_0.1CoCrFeNi high entropy alloy coating fabricated by laser cladding

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	陈保安, 张静媛, 祝志祥, 韩钰, 潘学东, 张磊, 陈素红. 化学成分对高强Al-Mg-Si合金组织和性能的影响[J]. 金属热处理, 2022, 47(4): 30-38.
[2]	陈东俊, 李广阳, 刘刚. 时效处理对AlSi9Cu3压铸铝合金组织和力学性能的影响[J]. 金属热处理, 2022, 47(4): 53-56.
[3]	李立, 曾艳, 吴晓春. 4Cr5Mo2VCo钢的热处理工艺优化[J]. 金属热处理, 2022, 47(4): 133-140.
[4]	张骥俊, 邢彦锋, 曹菊勇. 超声振动对CMT电弧增材制造铝合金组织与性能的影响[J]. 金属热处理, 2022, 47(4): 159-164.
[5]	杨春苗, 王珊, 王淑慧, 李延珍, 刘文文. RRA过程中预时效时间对7A85铝合金组织性能的影响[J]. 金属热处理, 2022, 47(3): 44-47.
[6]	陈善勇, 王快社, 乔柯, 王文. 碱热处理对搅拌摩擦加工AZ31镁合金耐腐蚀性能的影响[J]. 金属热处理, 2022, 47(3): 61-66.
[7]	梅金娜, 姜凤阳, 卫娜, 刘浪浪, 思芳, 刘松涛, 王俊勃, 刘江南. 轧制变形对高熵合金微观组织和力学性能的影响[J]. 金属热处理, 2022, 47(3): 67-71.
[8]	叶拓, 唐明, 刘吉兆, 刘伟, 吴远志, 刘巍, 徐文. 固溶温度对7075铝合金板材组织与力学性能的影响[J]. 金属热处理, 2022, 47(3): 119-123.
[9]	时海芳, 李强. 碳含量对Al_0.5Co_0.5NiCrFe高熵合金涂层组织与性能的影响[J]. 金属热处理, 2022, 47(3): 136-141.
[10]	林基辉, 温亚辉, 范文博, 张腾, 刘晨雨, 薛元琳. 钛合金表面激光改性技术研究进展[J]. 金属热处理, 2022, 47(3): 215-221.
[11]	叶拓, 何玉兵, 何文鹏, 刘巍, 袁浩登, 吴远志, 刘伟, 刘吉兆. 轧制态6082-T6铝合金的热压缩力学行为及微观组织分析[J]. 金属热处理, 2022, 47(2): 26-30.
[12]	闵旭东, 黄元春, 肖政兵, 刘宇, 任贤魏, 邹倜. 预处理对汽车用Al-Mg-Si合金组织和晶间腐蚀行为的影响[J]. 金属热处理, 2022, 47(2): 78-85.
[13]	刘跃, 韩顺, 厉勇, 王春旭, 严晓红, 李建新. 淬火温度对GE1014超高强度钢组织及性能的影响[J]. 金属热处理, 2022, 47(2): 125-129.
[14]	董瑞, 陈林, 岑耀东, 包喜荣. 不同热处理条件下贝氏体钢的微观组织和疲劳裂纹扩展[J]. 金属热处理, 2022, 47(2): 153-158.
[15]	谭皎, 张伯岩, 朱文光, 孙巧艳. 时效温度对Ti-5Al-4Zr-10Mo-3Cr钛合金微观组织及力学性能的影响[J]. 金属热处理, 2022, 47(1): 217-225.

激光熔覆Al0.1CoCrFeNi高熵合金涂层的组织和性能

Microstructure and properties of Al0.1CoCrFeNi high entropy alloy coating fabricated by laser cladding

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

激光熔覆Al_0.1CoCrFeNi高熵合金涂层的组织和性能

Microstructure and properties of Al_0.1CoCrFeNi high entropy alloy coating fabricated by laser cladding