[1]李 海, 王秀丽, 史志欣, 等. Al-Mg-Si-(Cu)铝合金在连续升温中的析出行为[J]. 中国有色金属学报, 2011, 21(9): 2028-2034. Li Hai, Wang Xiuli, Shi Zhixin, et al. Precipitation behaviors of Al-Mg-Si-(Cu) aluminum alloys during continuous heating[J]. The Chinese Journal of Nonferrous Metals, 2011, 21(9): 2028-2034. [2]Yuan H C, Wang C, Zhang J S. Microstructural characteristics and aging response of Zn-containing Al-Mg-Si-Cu alloy[J]. International Journal of Minerals Metallurgy and Materials, 2013, 20(7): 659-664. [3]杨 琳, 邹景霞. 固溶时效处理对汽车用Al-Mg-Si合金型材组织与性能的影响[J]. 金属热处理, 2014, 39(10): 35-38. Yang Lin, Zou Jingxia. Effect of solid solution and aging treatment on microstructure and mechanical properties of Al-Mg-Si alloy profile for automobile[J]. Heat Treatment of Metals, 2014, 39(10): 35-38. [4]周学浩, 孙有平, 王文熙, 等. 固溶时效对Al-Mg-Si-Cu合金组织和力学性能的影响[J]. 材料热处理学报, 2017, 38(2): 30-37. Zhou Xuehao, Sun Youping, Wang Wenxi, et al. Effect of solid solution and aging treatment on microstructure and mechanical properties of Al-Mg-Si-Cu alloy[J]. Transactions of Materials and Heat Treatment, 2017, 38(2): 30-37. [5]Esmaeili S, Wang X, Lloyd D J, et al. On the precipitation-hardening behavior of the Al-Mg-Si-Cu alloy AA6111[J]. Metallurgical and Materials Transactions A, 2003, 34(3): 751-763. [6]Yang W, Wang M, Jia Y, et al. Studies of orientations of β″precipitates in Al-Mg-Si-(Cu) alloys by electron diffraction and transition matrix analysis[J]. Metallurgical and Materials Transactions A, 2011, 42(9): 2917-2929. [7]Williams J C, Starke E A. Progress in structural materials for aerospace systems[J]. Acta Materialia, 2003, 51(19): 5775-5799. [8]汪长勤, 赵玉涛, 张松利, 等. 稀土钇对A356铝合金显微组织和拉伸性能的影响[J]. 机械工程材料, 2010, 34(1): 88-91. Wang Changqin, Zhao Yutao, Zhang Songli, et al. Effects of Si and Mg content and alloying elements on mechanical properties of A356 alloy[J]. Special Casting and Nonferrous Alloys, 2010, 34(1): 88-91. [9]吴 跃, 陈文琳, 李 伟, 等. Sc微合金化对Al-Mg-Si-Cu合金组织性能的影响[J]. 塑性工程学报, 2015, 22(3): 107-110. Wu Yue, Chen Wenlin, Li Wei, et al. Effect of Sc micro alloying on microstructure and properties of Al-Mg-Si-Cu alloy[J]. Journal of Plasticity Engineering, 2015, 22(3): 107-110. [10]万 彬. 稀土改性和热处理对Al-Mg-Si-Fe合金组织及性能影响的研究[D]. 合肥: 合肥工业大学, 2015. [11]Han N M, Zhang X M, Liu S D, et al. Effect of solution treatment on the strength and fracture toughness of aluminum alloy 7050[J]. Journal of Alloys and Compounds, 2011, 509(10): 4138-4145. [12]Li B, Pan Q L, Chen C P, et al. Effects of solution treatment on microstructural and mechanical properties of Al-Zn-Mg alloy by microalloying with Sc and Zr[J]. Journal of Alloys and Compounds, 2016, 664: 553-564. [13]刘丘林, 刘允中, 杜 良, 等. 喷射成形6061铝合金的热处理工艺[J]. 中国有色金属学报, 2012, 2(2): 350-357. Liu Qiulin, Liu Yunzhong, Du Liang, et al. Heat treatment process of spray formed 6061 aluminum alloy[J]. The Chinese Journal of Nonferrous Metals, 2012, 2(2): 350-357. [14]张珊珊. Al-Mg-Si合金铸态组织及其铸锭均匀化处理研究[D]. 沈阳: 东北大学, 2011. [15]王晓璐, 赵玉涛, 焦 雷, 等. Zr+Er及Zr+Y对Al-Mg-Si-Cu-Mn-Cr合金组织和拉伸力学性能的影响[J]. 材料导报, 2017, 31(18): 75-79. Wang Xiaolu, Zhao Yutao, Jiao Lei, et al. Effect of Zr+Er and Zr+Y on microstructure and tensile properties of Al-Mg-Si-Cu-Mn-Cr alloy[J]. Materials Review, 2017, 31(18): 75-79. [16]Mondolfo L F. Aluminum Alloys: Structure and Properties[M]. Butter Worths, 1976. [17]Ma K, Wen H, Hu T, et al. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy[J]. Acta Materialia, 2014, 62(5): 141-155. [18]Fang X, Song M, Li K, et al. Precipitation sequence of an aged Al-Mg-Si alloy[J]. Journal of Mining and Metallurgy B: Metallurgy, 2010, 46(2): 171-180. |