PCrNi3MoV高强钢带状组织在调质工艺中的显微特征

doi:10.13251/j.issn.0254-6051.2024.03.023

金属热处理 ›› 2024, Vol. 49 ›› Issue (3): 135-140.DOI: 10.13251/j.issn.0254-6051.2024.03.023

PCrNi3MoV高强钢带状组织在调质工艺中的显微特征

杜云飞, 白瑞, 吴璞, 张亚琴

太原工业学院机械工程系, 山西太原 030008

收稿日期:2023-09-29 修回日期:2024-02-03 出版日期:2024-03-25 发布日期:2024-04-24
作者简介:杜云飞(1988—),男,讲师,博士,主要研究方向为金属材料的热处理及热加工,E-mail:duyunfei@tit.edu.cn
基金资助:
山西省基础研究计划(自由探索类)青年项目(202303021212278);山西省高等学校科技创新项目(2022L546);太原工业学院引进人才科研资助项目(2023KJ006)

Microscopic characteristics of banded structure in PCrNi3MoV high-strength steel in quenching and tempering

Du Yunfei, Bai Rui, Wu Pu, Zhang Yaqin

Department of Mechanical Engineering, Taiyuan Institute of Technology, Taiyuan Shanxi 030008, China

Received:2023-09-29 Revised:2024-02-03 Online:2024-03-25 Published:2024-04-24

摘要/Abstract

摘要： PCrNi3MoV高强钢中合金元素在提升淬透性和力学性能的同时,也会在钢中因合金元素偏析形成带状组织。采用光学显微镜、扫描电镜、透射电镜及电子探针研究了PCrNi3MoV钢中带状组织在不同热处理工艺下的显微特征,结果表明,带状组织在PCrNi3MoV钢的不同热处理阶段始终存在,其微观组织构成及表现形式各不相同;淬火态下,PCrNi3MoV钢带状组织呈大尺寸晶粒和小尺寸晶粒交替分布的显微特征;回火态下,带状组织细晶区马氏体板条束尺寸细小,碳化物析出密度高。带状组织细晶区的显微硬度高于其粗晶区,主要与C元素及Cr、Mo、Mn和V等合金元素的在细晶区偏聚,从而使得该区域内细晶强化及析出强化效应增强。

关键词: Cr-Ni-Mo-V系钢, 带状组织, 调质处理, 元素偏析

Abstract: Alloying elements in PCrNi3MoV high-strength steel can improve the hardenability and mechanical properties, but also lead to banded structure by their segregation. Microscopic characteristics of banded structure in the PCrNi3MoV steel in different heat treatment processes were studied by means of optical microscope, scanning electron microscope, transmission electron microscope and electron probe microanalysis. The results show that the banded structure presents at different heat treatment stages of the tested steel, though the microscopic composition and characteristics are different. In the quenched state, the banded structure is characterized by alternating distribution of large and small size grains. In the tempered state, the size of martensitic lath in fine-grained region of the banded structure is smaller, the precipitation density of the carbides is higher, and the microhardness of the fine-grained region is higher than that in the coarse-grained region, which is attributed to the segregation of C and Cr, Mo, Mn and V elements in the fine-grained region, the grain strengthening and precipitation strengthening effects are more pronounced than those in the coarse-grained region.

Key words: Cr-Ni-Mo-V steel, banded structure, quenching and tempering treatment, element segregation

中图分类号:

杜云飞, 白瑞, 吴璞, 张亚琴. PCrNi3MoV高强钢带状组织在调质工艺中的显微特征[J]. 金属热处理, 2024, 49(3): 135-140.

Du Yunfei, Bai Rui, Wu Pu, Zhang Yaqin. Microscopic characteristics of banded structure in PCrNi3MoV high-strength steel in quenching and tempering[J]. Heat Treatment of Metals, 2024, 49(3): 135-140.

参考文献

[1]胡士廉, 吕彦, 胡俊, 等. 高强韧厚壁炮钢材料的发展[J]. 兵器材料科学与工程, 2018, 41(6): 108-112.
Hu Shilian, Lü Yan, Hu Jun, et al. Progress in high strength and toughness of steel material for thick-wall cannon[J]. Ordnance Material Science and Engineering, 2018, 41(6): 108-112.
[2]Du Yunfei, Lu Huihu, Sheng Xingquan. Coupled effects of banded structure and carbide precipitation on mechanical performance of Cr-Ni-Mo-V steel[J]. Materials Science and Engineering A, 2022, 832: 142478.
[3]Wen Tao, Hu Xiaofeng, Song Yuanyuan, et al. Carbides and mechanical properties in a Fe-Cr-Ni-Mo high-strength steel with different V contents[J]. Materials Science and Engineering A, 2013, 588: 201-207.
[4]Maropoulos S, Paul J D H, Ridley N. Microstructure-property relationships in tempered low alloy Cr-Mo-3. 5Ni-V steel[J]. Materials Science and Technology, 1993, 9(11): 1014-1020.
[5]Zhang Jun, Ding Hua, Misra R D K, et al. Microstructural evolution and consequent strengthening through niobium-microalloying in a low carbon quenched and partitioned steel[J]. Materials Science and Engineering A, 2015, 641: 242-248.
[6]张伟锋, 何肖飞, 尉文超, 等. Nb微合金化对Cr-Ni-Mo-V系高强钢组织及力学性能的影响[J]. 金属热处理, 2023, 48(1): 29-34.
Zhang Weifeng, He Xiaofei, Yu Wenchao, et al. Effect of Nb microalloying on microstructure and mechanical properties of Cr-Ni-Mo-V high-strength steel[J]. Heat Treatment of Metals, 2023, 48(1): 29-34.
[7]Dong Ji, Zhou Xiaosheng, Liu Yongchang, et al. Carbide precipitation in Nb-V-Ti microalloyed ultra-high strength steel during tempering[J]. Materials Science and Engineering A, 2017, 683: 215-226.
[8]廖佳, 付涛, 王晓巍, 等. 回火温度对大尺寸锻态35CrMo钢微观组织和力学性能的影响[J]. 金属热处理, 2022, 47(8): 232-236.
Liao Jia, Fu Tao, Wang Xiaowei, et al. Influence of tempering temperature on microstructure and mechanical properties of forged 35CrMo steel with large-scale[J]. Heat Treatment of Metals, 2022, 47(8): 232-236.
[9]张贺全, 谢撰业, 朱鑫, 等. 34CrNi3MoV钢箱体热处理工艺优化[J]. 金属热处理, 2023, 48(5): 224-228.
Zhang Hequan, Xie Zhuanye, Zhu Xin, et al. Optimization of heat treatment process for 34CrNi3MoV steel box[J]. Heat Treatment of Metals, 2023, 48(5): 224-228.
[10]乔志霞. 连续冷却30CrNi3MoV超高强钢固态相变行为[D]. 天津: 天津大学, 2010.
Qiao Zhixia. Solid-phase transformation behaviors in continuously-cooled ultra-high-strength 30CrNi3MoV steel[D]. Tianjin: University of Tianjin, 2010.
[11]高俊华, 杜云飞, 赵宇, 等. 奥氏体化温度对铁素体耐热钢时效过程中微观组织演化的影响[J]. 中北大学学报(自然科学版), 2023, 44(6): 692-698.
Gao Junhua, Du Yunfei, Zhao Yu, et al. Effects of austenitizing temperature on the microstructure evolution of modified ferritic heat resistant steel upon aging treatment[J]. Journal of North University of China (Natural Science Edition), 2023, 44(6): 692-698.
[12]Krauss G. Solidification, segregation, and banding in carbon and alloy steels[J]. Metallurgical and Materials Transactions B, 2003, 34(6): 781-792.
[13]Wang Yunlong, Chen Yinli, Yu Wei. Effect of Cr/Mn segregation on pearlite-martensite banded structure of high carbon bearing steel[J]. International Journal of Minerals, Metallurgy and Materials, 2021, 28(4): 665-675.
[14]Sun Junjie, Jiang Tao, Wang Yingjun, et al. Ultrafine grained dual-phase martensite/ferrite steel strengthened and toughened by lamella structure[J]. Materials Science and Engineering A, 2018, 734: 311-317.
[15]刘成宝, 翟正龙, 窦圣朋, 等. 齿轮钢SAE8620H的带状组织[J]. 材料热处理学报, 2015, 36(2): 155-161.
Liu Chengbao, Zhai Zhenglong, Dou Shengpeng, et al. Banded structure of a gear steel SAE8620H[J]. Transactions of Materials and Heat Treatment, 2015, 36(2): 155-161.

PCrNi3MoV高强钢带状组织在调质工艺中的显微特征

Microscopic characteristics of banded structure in PCrNi3MoV high-strength steel in quenching and tempering

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李铖, 彭其春, 童志博, 梁亮, 齐江华, 肖爱达, 董常福. 不同热处理工艺对9Ni低温容器用钢组织与性能的影响[J]. 金属热处理, 2024, 49(2): 98-103.
[2]	周琮, 陈献刚, 曹铁山, 赵杰. 调质工艺对Cr-Ni-Mo-V超高强韧钢组织和力学性能的影响[J]. 金属热处理, 2024, 49(2): 135-141.
[3]	刘艳锋, 刘小民, 王法云, 赵宇清, 李晓增, 潘永红. 火车制动杠杆吊座用40Cr螺栓断裂原因分析[J]. 金属热处理, 2024, 49(1): 279-283.
[4]	杨树林, 赵吉庆, 闫磊, 杨钢. эи866合金锻件径向条纹形成原因与消除工艺[J]. 金属热处理, 2023, 48(9): 279-282.
[5]	张亚玮, 刘雨溦, 梁英凯, 张继. Ni-Cr-Al基合金电渣重熔定向凝固铸锭的偏析行为及均匀化处理[J]. 金属热处理, 2023, 48(7): 44-48.
[6]	史长鑫, 谷国超, 崔树刚, 许文花, 肖桂勇, 吕宇鹏. 组织均匀化处理对Cr-Ni-Mo钢力学性能的影响[J]. 金属热处理, 2023, 48(12): 1-6.
[7]	王为民, 刘安奇, 郭春成, 笪仲钟, 亓海全, 韩向楠, 薛启河, 魏敏君. 感应炉+井式炉复合加热工艺对40Cr钢调质组织和力学性能的影响[J]. 金属热处理, 2023, 48(11): 185-190.
[8]	王皓, 田长亮, 王安, 贺建超, 覃作祥. E级钢调质处理后的组织与性能[J]. 金属热处理, 2022, 47(7): 168-176.
[9]	陈林恒, 汤启波, 武会宾, 赵晋斌, 伯飞虎. 淬火工艺对含Ni中锰钢组织和性能的影响[J]. 金属热处理, 2022, 47(2): 159-163.
[10]	王杰, 党淑娥, 范子靖, 郭伦, 朱雪彤. 17CrNiMo6齿轮钢的组织均匀化[J]. 金属热处理, 2022, 47(11): 126-133.
[11]	燕友增, 张皓, 曹奇, 孟高强, 夏国锋, 徐泷. 一级行星架内孔淬火开裂原因分析[J]. 金属热处理, 2021, 46(4): 236-238.
[12]	程源, 胡芳忠, 杨少朋, 汪开忠, 金国忠, 陈世杰, 王良林. 汽车前轴用40Cr钢锻件开裂失效分析[J]. 金属热处理, 2021, 46(12): 294-297.
[13]	张青, 曹培. 回火温度对42CrMo钢棒感应调质组织及力学性能的影响[J]. 金属热处理, 2021, 46(11): 182-185.
[14]	袁睿, 潘中德, 武会宾. 正火工艺对420 MPa级海上风电用钢板组织及性能的影响[J]. 金属热处理, 2021, 46(10): 112-116.
[15]	李有新, 娄振洋, 李小辉. Si、Mn含量对1000 MPa级工程机械用钢组织和性能的影响[J]. 金属热处理, 2020, 45(6): 201-205.