超超临界转子用Inconel 617合金的热塑性

doi:10.13251/j.issn.0254-6051.2024.01.015

金属热处理 ›› 2024, Vol. 49 ›› Issue (1): 103-107.DOI: 10.13251/j.issn.0254-6051.2024.01.015

超超临界转子用Inconel 617合金的热塑性

李红梅¹, 白亚冠¹, 郭伟¹, 聂义宏²

1. 天津重型装备工程研究有限公司, 天津 300457;
2. 中国第一重型机械股份公司, 黑龙江齐齐哈尔 161042

收稿日期:2023-03-08 修回日期:2023-11-17 发布日期:2024-02-29
通讯作者: 白亚冠,高级工程师,E-mail:302baiyaguan@163.com
作者简介:李红梅(1986—),女,高级工程师,硕士,主要研究方向为镍基高温合金材料的开发及制造工艺,E-mail:hmli2012@126.com。
基金资助:
工信部超超临界火电机组材料生产应用示范平台项目(TC210H022);科技部超超临界汽轮机转子锻件研制项目(2021YFB3704102)

Hot ductility of Inconel 617 alloy for A-USC turbine rotor application

Li Hongmei¹, Bai Yaguan¹,Guo Wei¹, Nie Yihong²

1. Tianjin Heavy Industries Research & Development Co., Ltd., Tianjin 300457, China;
2. China First Heavy Industries, Qiqihar Heilongjiang 161042, China

Received:2023-03-08 Revised:2023-11-17 Published:2024-02-29

摘要/Abstract

摘要： 研究了不同温度对Inconel 617合金铸锭高温拉伸热塑性的影响。结果表明,Inconel 617合金在900 ℃以上有良好的热塑性,拉伸断口有明显的颈缩,断面收缩率均在90%以上。随拉伸温度的升高,颈缩越来越明显,断口韧窝变深,热塑性越来越好。拉伸时发生了局部动态再结晶,随温度升高,再结晶变得充分,高于1200 ℃拉伸时晶粒快速长大,且断口出现熔融现象。

关键词: IN617合金, 热塑性, 动态再结晶

Abstract: Effect of different temperatures on high temperature tensile thermoplasticity of Inconel 617 alloy ingot was investigated. The results show that the Inconel 617 alloy has good thermoplasticity above 900 ℃, in which conditions the tensile fracture has obvious necking and the percentage reduction of area is more than 90%. With the increase of tensile temperature, the necking becomes more obvious, the dimples become more deeper, and the plasticity becomes more better. Dynamic recrystallization occurs locally during the tensile process. The higher the temperature, the more complete the recrystallization. The grains grow rapidly above 1200 ℃, and melting occurs at the fracture.

Key words: Inconel 617 alloy, hot ductility, dynamic recrystallization

中图分类号:

TG113.25⁺3

李红梅, 白亚冠, 郭伟, 聂义宏. 超超临界转子用Inconel 617合金的热塑性[J]. 金属热处理, 2024, 49(1): 103-107.

Li Hongmei, Bai Yaguan,Guo Wei, Nie Yihong. Hot ductility of Inconel 617 alloy for A-USC turbine rotor application[J]. Heat Treatment of Metals, 2024, 49(1): 103-107.

参考文献

[1]Mehdizadeh M, Farhangi H. Effects of different elevated temperature and long-term exposure on microstructural evolution and mechanical characteristics of IN617 Ni-based superalloy[J]. Materials Science and Engineering A, 2022, 851: 143025.
[2]Mehdizadeh M, Farhangi H. Precipitation behavior and mechanical properties of IN617 superalloy during operating at 850 ℃[J]. International Journal of Pressure Vessels and Piping, 2022, 198: 104674.
[3]赵子龙, 李生志, 马翔, 等. 700 ℃超超临界机组主蒸汽管道候选材料特性与服役性能研究现状[J]. 热力发电, 2021, 50(11): 1-12.
Zhao Zilong, Li Shengzhi, Ma Xiang, et al. Research status of main steam pipe candidate material characteristics and service performance for 700 ℃ ultra supercritical unit[J]. Thermal Power Generation, 2021, 50(11): 1-12.
[4]杨华春, 林富生, 谢锡善, 等. 欧洲700 ℃发电机组研发及617合金研究进展[J]. 发电设备, 2012, 26(5): 355-359.
Yang Huachun, Lin Fusheng, Xie Xishan, et al. R&D progress of 700 ℃ power generation technology and alloy 617 in Europe[J]. Power Equipment, 2012, 26(5): 355-359.
[5]李红梅, 聂义宏, 朱怀沈, 等. 改型IN617合金大锭型的铸态组织及均匀化工艺[J]. 金属热处理, 2019, 44(10): 105-111.
Li Hongmei, Nie Yihong, Zhu Huaishen, et al. As-cast microstructure and homogenization process of large-scale ingots of modified Inconel 617 superalloy[J]. Heat Treatment of Metals, 2019, 44(10): 105-111.
[6]聂义宏, 姜平. 700 ℃超超临界汽轮机镍基合金转子材料的研发动态[J]. 黑龙江科技信息, 2014(17): 85.
[7]白亚冠, 聂义宏, 寇金凤, 等. 成分改进对IN617合金组织及性能的影响[J]. 稀有金属材料与工程, 2022, 51(1): 327-334.
Bai Yaguan, Nie Yihong, Kou Jinfeng, et al. Effect of compositional modification on microstructure and properties of IN617 alloy[J]. Rare Metal Materials and Engineering, 2022, 51(1): 327-334.
[8]聂义宏, 白亚冠, 金嘉瑜, 等. 时效温度对改进型Inconel 617合金的组织与性能的影响[J]. 材料热处理学报, 2021, 42(2): 52-60.
Nie Yihong, Bai Yaguan, Jin Jiayu, et al. Effect of aging temperature on microstructure and mechanical properties of modified Inconel 617 alloy[J]. Transactions of Materials and Heat Treatment, 2021, 42 (2): 52-60.
[9]张冰冰, 白亚冠, 张鑫, 等. 固溶和时效处理时间对IN 706合金组织与性能的影响[J]. 特殊钢, 2022, 43(4): 75-81.
Zhang Bingbing, Bai Yaguan, Zhang Xin, et al. Effect of solution and aging treatment time on structure and mechanical properties of IN706 alloy[J]. Special Steel, 2022, 43(4): 75-81.
[10]陈正宗, 刘正东, 包汉生. 铸态CN617耐热合金的高温热塑性[J]. 金属热处理, 2016, 41(2): 35-37.
Chen Zhengzong, Liu Zhengdong, Bao Hansheng. Hot ductility of nickel-based heat-resistant alloy CN617 ingot[J]. Heat Treatment of Metals, 2016, 41(2): 35-37.
[11]陈正宗, 刘正东, 包汉生. 铸态耐热合金CN617热变形行为研究[J]. 金属热处理, 2014, 39(11): 84-88.
Chen Zhengzong, Liu Zhengdong, Bao Hansheng. Hot deformation behavior and procesing maps of CN617 nickel-based heat-resistant alloy ingot[J]. Heat Treatment of Metals, 2014, 39(11): 84-88.
[12]高佩, 程晓农, 罗锐. 超高温气冷堆中间换热器用Hayness 230合金的热拉伸行为研究[J]. 塑性工程学报, 2020, 27(10): 83-91.
Gao Pei, Cheng Xiaonong, Luo Rui. Study on hot tensile behavior of Hayness 230 alloy for intermediate heat exchanger of ultrahigh temperature gas-cooled reactor[J]. Journal of Plasticity Engineering, 2020, 27(10): 83-91.
[13]高佩, 李宏, 吴青松, 等. 热交换器用Inconel 600合金的热塑性研究[J]. 钢管, 2017, 46(6): 11-15.
Gao Pei, Li Hong, Wu Qingsong, et al. Study on hot ductility of Inconel 600 alloy for heat exchanger service[J]. Steel Pipe, 2017, 46(6): 11-15.
[14]赵帅, 聂义宏, 朱怀沈, 等. 700 ℃超超临界转子用617基合金镦粗工艺研究[J]. 一重技术, 2016(4): 59-64.
Zhao Shuai, Nie Yihong, Zhu Huaishen, et al. Study on upsetting process of 617-based superalloy for A-USC turbine rotor application[J]. CFHI Technology, 2016(4): 59-64.
[15]王英虎, 郑淮北, 白青青, 等. Mn18Cr18N高氮奥氏体不锈钢的高温力学性能[J]. 金属热处理, 2022, 47(1): 172-177.
Wang Yinghu, Zheng Huaibei, Bai Qingqing, et al. High temperature mechanical properties of Mn18Cr18N high nitrogen austenitic stainless steel[J]. Heat Treatment of Metals, 2022, 47(1): 172-177.
[16]郭建亭. 高温合金材料学: 中册[M]. 北京: 科学出版社, 2008: 127-141.
[17]Tiziano Ceccon. The most common failures of hot forging process of stainless steel and Ni-alloys[C]//18th International Forgemasters Meeting. 2011: 426-430.

超超临界转子用Inconel 617合金的热塑性

Hot ductility of Inconel 617 alloy for A-USC turbine rotor application

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	魏成实, 贾涓, 王贞, 葛锐, 刘静. 含钒中锰热成形钢的高温力学性能[J]. 金属热处理, 2023, 48(8): 35-41.
[2]	娄号南, 刘家奥, 梅飞强, 曹一超, 宋玺玉, 张伟红. GH2150合金的热变形行为及动态再结晶规律[J]. 金属热处理, 2023, 48(6): 167-172.
[3]	邹志鹏, 徐东, 任毅诚, 王怡群, 郑磊, 庞洪轩. 34CrNi3MoV合金钢的动态再结晶行为[J]. 金属热处理, 2023, 48(5): 32-40.
[4]	王超, 任永海, 韩森霖, 程治, 王龙祥, 赵飞, 谭元标. Inconel 718高温合金等温压缩过程的组织演变及温度场模拟[J]. 金属热处理, 2023, 48(5): 151-157.
[5]	张书铭, 林博超, 辛社伟, 王钧仡, 黄志涛, 付明杰. 亚稳β钛合金Ti-1500热变形行为[J]. 金属热处理, 2023, 48(5): 158-165.
[6]	刘帅, 王福明, 徐海伦, 刘少伟. 热变形行为与动态再结晶对低硫齿轮钢硫化锰夹杂物的影响[J]. 金属热处理, 2023, 48(5): 217-223.
[7]	马英建, 彭其春, 袁清, 梁亮, 齐江华, 肖爱达, 薛正良. 热轧低密度钢Fe-1.80Mn-1.05Al-0.09C的高温热塑性[J]. 金属热处理, 2023, 48(2): 43-49.
[8]	谢一夔, 王启丞, 陈子坤, 吴晓东, 王忠英. 18CrNiMo7-6齿轮钢的热变形行为及组织演变规律[J]. 金属热处理, 2023, 48(2): 103-109.
[9]	吴迎飞, 孙中华, 王育飞, 王程明, 张雲飞, 彭会芬. 均匀化退火处理对因瓦合金铸锭组织及性能的影响[J]. 金属热处理, 2022, 47(2): 130-136.
[10]	栾玉琦, 吴红艳, 王琬淇, 高秀华, 杜林秀. 轴类锻件用中锰钢的高温热塑性[J]. 金属热处理, 2022, 47(10): 52-57.
[11]	强菲, 王文, 张婷, 杨娟, 蔡军, 王快社. Al-Zn-Mg-Cu铝合金厚板搅拌摩擦焊接头搅拌区微观组织[J]. 金属热处理, 2022, 47(1): 135-141.
[12]	郭利平, 何学清, 阳代军, 黄元春, 王强. Cu-0.5Cr-0.1Zr合金的热压缩变形行为[J]. 金属热处理, 2021, 46(9): 180-186.
[13]	李冬升, 赵恩旭, 王威, 谭莉, 张俊鹏, 田振宇. IN690合金的高温本构模型及动态再结晶模型[J]. 金属热处理, 2021, 46(8): 8-14.
[14]	吉光, 高秀华, 龙金花. 微合金元素Nb对高碳合金钢动态再结晶行为的影响[J]. 金属热处理, 2021, 46(8): 26-29.
[15]	李其, 陈正宗, 蒋新亮, 刘正东, 左良. 固溶温度对改型In617合金组织和性能的影响[J]. 金属热处理, 2021, 46(8): 109-114.