Home
About Journal
Editorial Board
Call Paperse
Subscribe
Advertising Services
Contact Us
Corporate
中文
Online
Online Journals
Forthcoming Article
Current Issue
Archive
Advanced Search
Volumn Content
Browse by section
Read Articles
Download Articles
E-mail Alert
RSS
Downloads
Copyright Transfer Agreement
Submission Template
Recommended Paper
More...
Volumn Content
Heat Treatment of Metals 2019 Vol.44
Please wait a minute...
For Selected:
Download Citations
EndNote
Ris
BibTeX
Toggle Thumbnails
Select
Consistent heat treatment technologies
Xu Yueming, Li Qiao, Luo Xinmin
HTM
doi:10.13251/j.issn.0254-6051.2019.01.001
Select
Research progress of grain refinement heat treatment for heavy forgings
Gu Jianfeng, Han Lizhan, Li Chuanwei
HTM
doi:10.13251/j.issn.0254-6051.2019.01.002
Select
Vacuum heat treatment technology for superalloys used in aero-engine
Xue Wenli, Gao Sha, Wang Yin, Hou Huipeng, Huang Jiahua
HTM
doi:10.13251/j.issn.0254-6051.2019.01.003
Select
Intermediary annealing process of AA8079 double-zero aluminum foil
Fu Li, Yin Dengfeng, Hu Ting, Lu Shaokang
HTM
doi:10.13251/j.issn.0254-6051.2019.01.004
Select
Influence of annealing temperature on texture and properties of cold drawn steel wire
Zhang Zhenggui, Zhu Wanbo, Yao Xusheng, Chen Haonan, Xiao Tie
HTM
doi:10.13251/j.issn.0254-6051.2019.01.005
Select
Effect of two-stage aging on properties of liquid forged 6061 aluminum alloy
Sun Yuejun, Cui Zewen, Gao Yanjing, Yang Zeyu
HTM
doi:10.13251/j.issn.0254-6051.2019.01.006
Select
Effect of intercritical annealing temperature on microstructure and properties of cold rolled 0.11C-7.05Mn steel
Pan Hongbo, Wang Wenfang, Pan Shuo
HTM
doi:10.13251/j.issn.0254-6051.2019.01.007
Select
Continuous cooling transformation and hot rolling process of C-Si-Mn welding wire steel
Zhou Yun, Zhang Yu, Chen Gang
HTM
doi:10.13251/j.issn.0254-6051.2019.01.008
Select
Effect of cryogenic treatment on wear resistance at elevated temperature and dislocation density of tool steel Cr7V
Ma Zhijun, Liu Yi, Wu Binbin, Lin Jianping
HTM
doi:10.13251/j.issn.0254-6051.2019.01.009
Select
Microstructure evolution of low nickel high nitrogen austenitic stainless steel during heating in solid solution treatment
Zhao Yingli, Ji Shuang, Zhang Yunfei, Zhang Kun, Bai Lijuan
HTM
doi:10.13251/j.issn.0254-6051.2019.01.010
Select
Effect of heat treatment on electrochemical properties of rare-earth hydrogen storage alloys for new energy vehicles
Zhang Jun, Xu Zengyong, Zhang Taichao, Jia Guanghui, Luo Bin
HTM
doi:10.13251/j.issn.0254-6051.2019.01.011
Select
Effect of heat treatment on mechanical properties of G50 ultra-high strength steel
Zhang Yonghao, Li Jingmin, Li Chang’an
HTM
doi:10.13251/j.issn.0254-6051.2019.01.012
Select
Effect of strain rate on tensile behavior of high nitrogen austenitic steel
Peng Mengdu,Shi Jie,Cui Bing,Sun Ting,Li Xiaoyuan,Wang Maoqiu
HTM
doi:10.13251/j.issn.0254-6051.2019.01.013
Select
Effect of pre-oxidation on different ion nitriding processes
Li Shuangxi, Gu Min, Sun Qifeng
HTM
doi:10.13251/j.issn.0254-6051.2019.01.014
Select
Effects of annealing and temper rolling on mechanical properties and microstructure of cold rolled HSLA sheet
Liu Liping, Li Guilan, Song Haiwu
HTM
doi:10.13251/j.issn.0254-6051.2019.01.015
Select
Effect of controlled cooling in two-phase zone and normalizing on microstructure and properties of C38+N non-quenched and tempered steel
Mi Fengliang, Zhang Zhaowei, Kang Hongsheng, Jian Baozhu, Lü Yupeng, Li Jianzu
HTM
doi:10.13251/j.issn.0254-6051.2019.01.016
Select
Effect of aging and thermal-cold cycling on dimensional stability of Al
2
O
3
reinforced 2A12 alloy
Ma Li, He Luju
HTM
doi:10.13251/j.issn.0254-6051.2019.01.017
Select
Effect of cryogenic treatment on mechanical properties and wear resistance of T10A steel
Zhao Anan, Hu Shengshuang
HTM
doi:10.13251/j.issn.0254-6051.2019.01.018
Select
Effect of solution treatment on mechanical properties and damping capacity of ZK series magnesium alloys
Gao Xipeng, Yan Hongge, Chen Jihua, Xia Weijun, Su Bin, Zhou Xiongpeng
HTM
doi:10.13251/j.issn.0254-6051.2019.01.019
Select
Effects of solution and aging on microstructure and properties of new high-strength and high hardenability hot-extruded Al-Zn-Mg-Cu-Zr alloy
Jiang Fuqing, Huang Jiwu, Liu Yun, Yin Zhimin
HTM
doi:10.13251/j.issn.0254-6051.2019.01.020
Select
Tensile strain hardening behavior of hot rolled high-strength V-Mo composite alloyed TWIP steel
Wu Huankun, Sun Ting, Shi Jie, Wu Run
HTM
doi:10.13251/j.issn.0254-6051.2019.01.021
Select
Effect of rolling path on microstructure and mechanical properties of Ti-6242 alloy
Xiao Yu, Liu Huiqun, Yi Danqing,Wang Jian, Chen Zhanqian, Gao Xin
HTM
doi:10.13251/j.issn.0254-6051.2019.01.022
Select
Alloying and heat treatment of ductile cast iron for heavy duty vehicle crankshaft
Chen Guanghui, Wang Zhen, Hao Changli
HTM
doi:10.13251/j.issn.0254-6051.2019.01.023
Select
Experimental research on applicability of austenite recrystallization model of Q235 steel under ultrasonic vibration
He Qingqiang, Chai Wanli, Zhu Han, Geng Chunli, Liu Jianguo, Li Jing
HTM
doi:10.13251/j.issn.0254-6051.2019.01.024
Select
Microstructure and mechanical properties of DZ1, 25CrNiMo and 30CrNi3MoV axle steels
Huang Wen, Zhang Yan, Li Xiangzhi, Si Tingzhi
HTM
doi:10.13251/j.issn.0254-6051.2019.01.025
Select
Effects of solution and aging on microstructure and tensile properties of Al-4.6Cu-0.9Li alloy
Li Zhutie, Zhao Zhiguo, Shi Dandan, Yu Xinxiang
HTM
doi:10.13251/j.issn.0254-6051.2019.01.026
Select
Microstructural evolution and CSL characteristic grain boundary distribution of Al-killed low-carbon steel sheet during recrystallization
Zhuang Dongdong, Zhang Weida, Wang Yinjie, Lü Yi
HTM
doi:10.13251/j.issn.0254-6051.2019.01.027
Select
Effect of annealing temperature on damping capacity and mechanical properties of Fe-Cr-Mo alloy
Yang Yanli, Gao Peng, Sun Yongqing, Liang Jianxiong
HTM
doi:10.13251/j.issn.0254-6051.2019.01.028
Select
Microstructure and properties of reciprocating extrusion Mg-
x
Sn-Al-Zn-Si alloy and its deformation mechanism
Gao Aihua, Zhang Jianxin
HTM
doi:10.13251/j.issn.0254-6051.2019.01.029
Select
Effect of controlled rolling and controlled cooling on microstructure and properties of high strength building steel
Chen Huahui, Liang Rui
HTM
doi:10.13251/j.issn.0254-6051.2019.01.030
Select
Effect of long-term aging at 630 ℃ on structure and mechanical properties of FB2 rotors steel
Zhang Yu, Zhao Jiqing, Li Li, Yang Gang
HTM
doi:10.13251/j.issn.0254-6051.2019.01.031
Select
Effect of post-weld heat treatment on microstructure and mechanical properties of P92 steel welded joint
Xu Zhongfeng, Wang Gangang, Lu Li, Zhu Ping, Yang Jia
HTM
doi:10.13251/j.issn.0254-6051.2019.01.032
Select
Softening and hardening of 18CrNiMo7-6 steel during surface nanocrystallization treatment
Zhu Min, Zhu Wanquan, Shuai Linfei, Ma Guoqiang, Wu Guilin
HTM
doi:10.13251/j.issn.0254-6051.2019.01.033
Select
High temperature oxidation behavior of double-layer bond coat in thermal barrier coating
Li Xiao, Peng Xinyu, Zhang Shihu, Liu Huang, Dong Hui, Wang Tao
HTM
doi:10.13251/j.issn.0254-6051.2019.01.034
Select
Effect of deposition pressure on microstructure and mechanical properties of pulse-PECVD prepared DLC films
Li Ruiwu, Zhou Yanwen, Li Jianwei, Fan Wei, Guo Yuanyuan, Wu Fayu
HTM
doi:10.13251/j.issn.0254-6051.2019.01.035
Select
β phase transformation behavior of TC4 laser cladding on Ti811 surface
Wang Hao, Zhang Tiangang, Wang Tao
HTM
doi:10.13251/j.issn.0254-6051.2019.01.036
Select
Ultrasonic vibration assisted Ni60WC25 powder laser cladding technology
Gao Guofu, Guo Zilong, Li Kang, Wang Yi, Su Tingting
HTM
doi:10.13251/j.issn.0254-6051.2019.01.037
Select
Electrochemical corrosion behavior of Stellite-F laser cladding layer on surface of 316L stainless steel
Zhong Xiaokang, Wang Xingfu, Han Fusheng
HTM
doi:10.13251/j.issn.0254-6051.2019.01.038
Select
Effect of thermal diffusion treatment on corrosion behavior of hot dip aluminized 23MnCrNiMo54 steel
Wen Sijia, Wang Tonghui, Li Guang, Chen Yuxi, Wang Weizhi, Xia Yuan
HTM
doi:10.13251/j.issn.0254-6051.2019.01.039
Select
Surface coatings and corrosion resistance of TC4 titanium alloy in marine tube system for ships
Zhang Qi, Luo Lirong, Liu Tao, Qin Zilan
HTM
doi:10.13251/j.issn.0254-6051.2019.01.040
Select
Non-isothermal aging of 7055 aluminum alloy
Xiang Jianbo, Chen Wei, Xiong Luobao, Wu Zikai, Zhou Haiming, Luo Fenghua
HTM
doi:10.13251/j.issn.0254-6051.2019.01.041
Select
Effect of Y
2
O
3
on phase stability of CoCrFeMnNi high entropy alloy after annealing
Zhang Taichao, Li Junkui, Yang Chunhui, Wu Qipeng
HTM
doi:10.13251/j.issn.0254-6051.2019.01.042
Select
Precipitation of nanoscale carbides in Ti-Mo microalloyed steel during continuous cooling process
Bu Fanzheng, Wang Yubin, Wu Qingmei, Wang Xuemin, Zheng Lianhui, Guo Qiang
HTM
doi:10.13251/j.issn.0254-6051.2019.01.043
Select
Thermal conductive characteristics of Cr-Mo-V steel for high-speed train brake disc
Hu Fangzhong, Wang Kaizhong, Cheng Shijie, Hu Yiyao, Hao Zhengyu, Sun Wei
HTM
doi:10.13251/j.issn.0254-6051.2019.01.044
Select
Failure analysis of a crankshaft hot forging die of 4Cr5Mo2V steel
Bai Zhixiong, Zheng Mingda, Wang Yubin, Zuo Pengpeng, Wu Xiaochun
HTM
doi:10.13251/j.issn.0254-6051.2019.01.045
Select
Study on testing method for grain size of medium and high carbon steel
Chen Jie, Li Wenjun, Liu Xinkuan, Wang Junyi, Sheng Rongsheng
HTM
doi:10.13251/j.issn.0254-6051.2019.01.046
Select
EBSD characterization method of pearlite nodule size in steel
Cui Guibin, Ju Xinhua, Meng Yang, Yin Lixin, Yan Chunlian
HTM
doi:10.13251/j.issn.0254-6051.2019.01.047
Select
Simulation and analysis of eddy current field and temperature field of strips during transverse flux continuous induction heating
Wang Youhua, Wu Jiancheng, Liu Chengcheng, Chen Long
HTM
doi:10.13251/j.issn.0254-6051.2019.01.048
Select
Numerical simulation on influencing factors of micropartical shot peening
Lü Wenbo, Zhang Hai, Zhang Xiaomin, Han Junhao, Song Xiaoqing, Zhao Wu
HTM
doi:10.13251/j.issn.0254-6051.2019.01.049
Select
Effect of thermal diffusivity on carbon segregation and cementite net of high carbon wire rod
Lu Xiuyu, Liu Jing, Xia Yanhua, Wang Zhen, Zhang Fan, Ren Anchao, Jiang Yuedong
HTM
doi:10.13251/j.issn.0254-6051.2019.01.050