Quenching and tempering and gas nitriding processes of 30CrMoV9 steel for hydraulic piston pump

doi:10.13251/j.issn.0254-6051.2021.08.039

Abstract

Abstract: In order to improve the comprehensive performance and surface wear resistance and fatigue resistance of the 30CrMoV9 steel for hydraulic piston pump, the quenching and tempering process and the gas nitriding process after rough machining of the 30CrMoV9 steel were studied, and the quenched and tempered hardness, nitrided layer depth, nitrided microstructure and nitrided layer hardness were tested. The results show that after quenching at 900 ℃ and tempering at 630-640 ℃, the tested steel can meet the requirement of hardness in the range of 28-35 HRC. After gas nitriding, the average surface hardness of the quenched and tempered 30CrMoV9 steel can reach more than 750 HV0.5, which can effectively improve the contact fatigue strength of parts.

Key words: 30CrMoV9 steel, quenching and tempering, gas nitriding, comprehensive performance, microstructure

CLC Number:

TG156.8

Wang Juan, Hu Ke, Zhong Xiangling, Jin Yongqian. Quenching and tempering and gas nitriding processes of 30CrMoV9 steel for hydraulic piston pump[J]. Heat Treatment of Metals, 2021, 46(8): 205-208.

[1]	Wang Yudai, Liu Yang, Zhu Yanyan, Tian Xiangjun, Cheng Xu, Ran Xianzhe, Qian Tingting. Effect of heat treatment on microstructure homogeneity and tensile properties of hybrid fabricated AerMet100 ultra-high strength steel [J]. Heat Treatment of Metals, 2022, 47(4): 1-9.
[2]	Zhang Ziyan, Chen Jun, Chen Xiaoya, Li Quan'an, Liu Jianxin. Effect of solution and aging treatment on microstructure and corrosion resistance of Mg-4Sm-3Gd-0.5Zr alloy [J]. Heat Treatment of Metals, 2022, 47(4): 10-16.
[3]	Liang Enpu, Xu Le, Yang Yong, Wang Maoqiu. Effects of Al and Cu additions on microstructure and mechanical properties of 40CrNi3MoV steel [J]. Heat Treatment of Metals, 2022, 47(4): 17-23.
[4]	Qi Xiaoliang, Li Yan, Ding Wei, Zhao Zengwu. Effect of original microstructure of medium manganese TRIP steel containing Al on microstructure and mechanical properties after intercritical annealing [J]. Heat Treatment of Metals, 2022, 47(4): 24-29.
[5]	Chen Baoan, Zhang Jingyuan, Zhu Zhixiang, Han Yu, Pan Xuedong, Zhang Lei, Chen Suhong. Effect of chemical composition on microstructure and properties of high strength Al-Mg-Si alloy [J]. Heat Treatment of Metals, 2022, 47(4): 30-38.
[6]	Chen Dongjun, Li Guangyang, Liu Gang. Effect of aging treatment on microstructure and mechanical properties of AlSi9Cu3 HPDC aluminum alloy [J]. Heat Treatment of Metals, 2022, 47(4): 53-56.
[7]	Chen Liansheng, Zhang Luyou, Tian Yaqiang, Yang Zixuan, Li Hongbin, Pan Hongbo, Wei Yingli. CCT curves and microstructure and properties of low-carbon high strength marine steel [J]. Heat Treatment of Metals, 2022, 47(4): 63-68.
[8]	Jia Changyuan, Huo Yuanming, He Tao, Huo Cunlong, Liu Keran. High temperature tensile deformation behavior and microstructure evolution law of 40CrNiMo steel [J]. Heat Treatment of Metals, 2022, 47(4): 69-74.
[9]	Wang Yunlong, Yu Wei, Zhang Yi, Shi Jiaxin, Li Minghui. Effect of austenitizing temperature on isothermal transformation and mechanical properties of bainite steel [J]. Heat Treatment of Metals, 2022, 47(4): 80-85.
[10]	Liu Liyan, Bi Wenzhen, Wei Xicheng. Effect of Mn element on microstructure evolution of galvanized coating of hot stamping steel [J]. Heat Treatment of Metals, 2022, 47(4): 93-99.
[11]	Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong. Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel [J]. Heat Treatment of Metals, 2022, 47(4): 122-127.
[12]	Su Pengji, Ma Yonglin, Dong Lili, Yang Xuefeng. Effect of magnetic field pre-annealing on microstructure and texture of CGO steel [J]. Heat Treatment of Metals, 2022, 47(4): 128-132.
[13]	Li Li, Zeng Yan, Wu Xiaochun. Heat treatment process optimization for 4Cr5Mo2VCo steel [J]. Heat Treatment of Metals, 2022, 47(4): 133-140.
[14]	Lü Jiesheng, Song Zhigang, He Jianguo, Feng Han, Zheng Wenjie, Zhu Yuliang. Microstructure transformation and strengthening-plasticization mechanism of S32205 duplex stainless steel after cold rolling and annealing [J]. Heat Treatment of Metals, 2022, 47(4): 141-145.
[15]	Wang Qi, Wu Guangliang. Effect of tempering temperature on microstructure and properties of 1100 MPa grade high-strength steel [J]. Heat Treatment of Metals, 2022, 47(4): 146-150.

Quenching and tempering and gas nitriding processes of 30CrMoV9 steel for hydraulic piston pump

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments