Research progress on composition and microstructure of marine engineering steel and production process of H-beam steel

doi:10.13251/j.issn.0254-6051.2024.03.048

Abstract

Abstract: With the implementation of China's marine development strategy, the demand and development of marine engineering steel will become a new growth point in the domestic steel industry. The composition design, microstructure design, and production process research of marine engineering steel have become hot areas of focus for scholars. Due to significant differences in cross-section, there are certain differences in the arrangement of processing technology between steel plates and H-beams used in marine engineering. This paper summarizes the current research status and progress of marine engineering steel, introduces its composition design characteristics of marine engineering steel and alloying mechanism, analyzes the microstructure design characteristics of different intensity levels, and expounds the production process characteristics of marine engineering steel plates and H-beams from three aspects: heating temperature, rolling and cooling process. It also summarizes and prospects the research focus of marine engineering steel production technology.

Key words: marine engineering steel, ingredient design, microstructure design, production process

CLC Number:

TG142.1

Yao Huiqin, Wang Jingzhong, Zhao Peilin, Li Chao, Yang Xirong, Liu Xiaoyan, Luo Lei. Research progress on composition and microstructure of marine engineering steel and production process of H-beam steel[J]. Heat Treatment of Metals, 2024, 49(3): 293-301.

References

[1]杨忠民. 我国海洋工程用钢发展现状[J]. 新材料产业, 2013(11): 17-19.
Yang Zhongmin. The development status of steel for marine engineering in China[J]. New Materials Industry, 2013(11): 17-19.
[2]唐学生. 海洋工程用钢需求现状及前景分析[J]. 船舶物资与市场, 2010(1): 10-12.
Tang Xuesheng. Analysis of the current situation and prospect of steel demand for marine engineering[J]. Ship Materials and Markets, 2010(1): 10-12.
[3]杨才福, 苏航. 高性能船舶及海洋工程用钢的开发[J]. 钢铁, 2012, 47(12): 1-8.
Yang Caifu, Su Hang. Research and development of high performance shipbuilding and marine engineering steel[J]. Iron and Steel, 2012, 47(12): 1-8.
[4]徐振, 王弘江, 李凯, 等. 超高强海工钢研发生产现状与发展趋势[J]. 辽宁科技大学学报, 2020, 43(4): 264-267, 314.
Xu Zhen, Wang Hongjiang, Li Kai, et al. Production status and development trend of ultra-high strength marine steels[J]. Journal of University of Science and Technology Liaoning, 2020, 43(4): 264-267, 314.
[5]刘敏. 海洋平台用钢E690工艺优化研究[D]. 赣州: 江西理工大学, 2015.
[6]颜慧成, 曹慧泉, 罗登, 等. 钛、铌、硼对低碳贝氏体钢组织与性能的影响[J]. 钢铁研究学报, 2010, 22(5): 55-58.
Yan Huicheng, Cao Huiquan, Luo Deng, et al. Influence of Ti, Nb and B on microstructure and mechanical properties of low carbon bainitic steel[J]. Journal of Iron and Steel Research, 2010, 22(5): 55-58.
[7]邓通武. C、Mn、Cr对中碳MnB钢228节距履带淬透性的影响[J]. 特殊钢, 2012, 33(6): 53-55.
Deng Tongwu. Effect of C, Mn, Cr on hardenability medium of carbon MnB steel 228 pitch crawler belt[J]. Special Steel, 2012, 33(6): 53-55.
[8]刘东雨, 白秉哲, 方鸿生. Si对低合金高强度钢和超高强度钢抗延迟断裂性能的影响[J]. 国外金属热处理, 2001, 22(1): 25-27, 11.
Liu Dongyu, Bai Bingzhe, Fang Hongsheng. Effect of Si on the resistance of low alloy high strength steel and ultra high strength steel to delay breakage[J]. Heat Treatment of Metals Abroad, 2001, 22(1): 25-27, 11.
[9]Luo W T, Wang L L, Wang Y H, et al. Microstructure and mechanical properties of a 2wt% Nb bearing low carbon steel[J]. Materials Science and Engineering A, 2021, 826: 141957.
[10]李振团, 柴锋, 杨才福, 等. 淬火工艺对UHS海工钢力学性能的影响[J]. 材料研究学报, 2018, 32(12): 889-897.
Li Zhentuan, Chai Feng, Yang Caifu, et al. Effect of quenching on mechanical property of ultra-high strength marine engineering steel[J]. Chinese Journal of Materials Research, 2018, 32(12): 889-897.
[11]吴保桥, 彭林, 何军委, 等. Cr元素及轧后控冷工艺对高强H型钢组织性能的影响[J]. 轧钢, 2021, 38(4): 55-59.
Wu Baoqiao, Peng Lin, He Junwei, et al. Influence of Cr element and controlled colling process after rolling on microstructure and mechanical properties of high-strength H-beam steel[J]. Steel Rolling, 2021, 38(4): 55-59.
[12]Zhao N, Zhao Q Q, He Y L, et al. Strengthening-toughening mechanism of cost-saving marine steel plate with 1000 MPa yield strength[J]. Materials Science and Engineering A, 2022, 831, 142280.
[13]陶素芬. 700 MPa级海洋平台用钢成分、组织与性能的研究[D]. 北京: 北京科技大学, 2015.
[14]狄国标, 周砚磊, 麻庆申, 等. 镍含量对海洋平台用钢组织性能的影响[J]. 钢铁研究学报, 2012, 24(6): 52-56.
Di Guobiao, Zhou Yanlei, Ma Qingshen, et al. Effect of Ni content on microstructures and mechanical properties of offshore platform steel[J]. Journal of Iron and Steel Research, 2012, 24(6): 52-56.
[15]余永光. 船舶及海洋平台用钢的开发与应用[D]. 秦皇岛: 燕山大学, 2016.
[16]Monschein S, Ragger K S, Zugner D, et al. Influence of the Ti content on the grain stability and the recrystallization behavior of Nb-alloyed high-strength low-alloyed steels[J]. Steel Research International, 2008, 485(1/2): 383-394.
[17]万响亮, 李光强, 吴开明. 原位观察TiN粒子对低合金高强度钢模拟焊接热影响区粗晶区晶粒细化作用[J]. 工程科学学报, 2016, 38(3): 371-378.
Wan Xiangliang, Li Guangqiang, Wu Kaiming. In-situ observations of grain refinement by TiN particles in the simulated coarse-grained heat-affected zone of a high-strength low-alloy steel[J]. Chinese Journal of Engineering, 2016, 38(3): 371-378.
[18]Liu D, Jian Y, Zhang Y H. In-situ observation of bainite transformation in CGHAZ of 420 MPa grade offshore engineering steel with different Mo contents[J]. International Journal of Refractory Metals and Hard Material, 2022, 62(4): 714-725.
[19]席仕平. 含Mo、Sn海工钢动态再结晶行为实验研究及数值模拟[D]. 秦皇岛: 燕山大学, 2021.
[20]Xi S P, Gao X L, Liu W, et al. Hot deformation behavior and processing map of low-alloy offshore steel[J]. Journal of Iron and Steel Research International, 2022, 29(3): 474-483.
[21]黄刚. 合金元素对高强度钢焊接热影响区微观组织和韧性的影响[D]. 武汉: 武汉科技大学, 2019.
[22]Wu X Y, Xiao P C, Wu S J, et al. Effect of molybdenum on the impact toughness of heat-affected zone in high-strength low-alloy steel[J]. Materials, 2021, 14(6): 1430.
[23]李德强, 吴宇新. Al对超高强海工钢组织及力学性能的影响[J]. 鞍钢技术, 2020(3): 23-29.
Li Deqiang, Wu Yuxin. Effect of Al on microstructures and mechanical properties of ultra-high strength steel for marine engineering[J]. Angang Technology, 2020(3): 23-29.
[24]Xu X X, Cheng H L, Wu W, et al. Stress corrosion cracking behavior and mechanism of Fe-Mn-Al-C-Ni high specific strength steel in the marine atmospheric environment[J]. Corrosion Science, 2021, 191: 109760.
[25]王顺兴. 金属热处理原理与工艺[M]. 哈尔滨: 哈尔滨工业大学出版社, 2019.
[26]冯锐. 铁素体/珠光体型钢板内部质量及其影响因素研究[D]. 济南: 山东大学, 2013.
[27]刘观猷, 葛亮, 周永浩, 等. 420 MPa级超高强度高韧性海工钢的研制[J]. 宽厚板, 2021, 27(6): 30-33.
Liu Guanyou, Ge Liang, Zhou Yonghao, et al. Research and development of 420 MPa grade ultra-high strength and high toughness steel for offshore engineering[J]. Wide and Heavy Plate, 2021, 27(6): 30-33.
[28]尚成嘉, 杨善武, 王学敏, 等. 新颖的贝氏体/铁素体双相低碳微合金钢[J]. 北京科技大学学报, 2003, 25(3): 288-290.
Shang Chengjia, Yang Shanwu, Wang Xuemin, et al. A bainite/ferritic dual-phase low carbon microalloy steel with high strength and ductility[J]. Journal of University of Science and Technology Beijing, 2003, 25(3): 288-290.
[29]Shao Y, Liu C X, Yan Z S, et al. Formation mechanism and control methods of acicular ferrite in HSLA steels: A review[J]. Journal of Materials Science and Technology, 2018, 34(5): 737-744.
[30]Wang H H, Li G Q, Wan X L, et al. Microstructural characteristics and impact toughness in YS690MPa steel weld metal for offshore structures[J]. Science and Technology of Welding and Joining, 2017, 22(2): 133-142.
[31]狄国标, 杨永达, 麻庆申, 等. TMCP工艺海洋平台用钢EQ51的开发[J]. 钢铁, 2015, 50(6): 75-80.
Di Guobiao, Yang Yongda, Ma Qingshen, et al. Development of TMCP processed EQ51 plate steel for offshore platform[J]. Iron and Steel, 2015, 50(6): 75-80.
[32]周凯. 980 MPa级冷轧双相钢连续退火工艺与组织性能研究[D]. 沈阳: 东北大学, 2015.
[33]陈庆. 淬火温度对马氏体/铁素体双相钢组织性能的影响[J]. 冶金分析, 2018, 38(10): 63-67.
Chen Qing. Effects of quenching temperature on the microstructure and properties of martensite/ferrite dual phase steel[J]. Metallurgical Analysis, 2018, 38(10): 63-67.
[34]张丕军. 800 MPa级针状铁素体马氏体双相钢厚板的研制[D]. 沈阳: 东北大学, 2006.
[35]李琳, 徐锐良, 李忠利, 等. 带状组织对铁素体-马氏体钢拉伸断裂行为的影响[J]. 热加工工艺, 2021, 50(14): 46-50.
Li Lin, Xu Ruiliang, Li Zhongli, et al. Effect of banded structure on tensile fracture behavior of ferritic-martensitic steel[J]. Hot Working Technology, 2021, 50(14): 46-50.
[36]聂燚, 董文龙, 赵运堂, 等. 高强度低碳贝氏体钢工艺和组织对性能的影响[J]. 北京科技大学学报, 2006, 28(8): 733-738.
Nie Yan, Dong Wenlong, Zhao Yuntang, et al. Effects of process parameters and intermediate transformation structure on mechanical properties of a high strength low carbon bainitic steel[J]. Journal of University of Science and Technology Beijing, 2006, 28(8): 733-738.
[37]宗云, 刘春明. 低碳高强度海洋平台用钢的研究应用进展[J]. 齐鲁工业大学学报, 2017, 31(2): 31-34.
Zong Yun, Liu Chunming. Research progress and application of low-carbon high-strength offshore platform steel[J]. Journal of Qilu University of Technology, 2017, 31(2): 31-34.
[38]李静, 尚成嘉, 贺信莱, 等. 碳含量对高性能桥梁钢组织结构和性能的影响[J]. 钢铁, 2006, 41(12): 64-69.
Li Jing, Shang Chengjia, He Xinlai, et al. Effect of carbon content on microstructure and properties of high- performance bridge steel[J]. Iron and Steel, 2006, 41(12): 64-69.
[39]王振云, 丁玮. 马氏体/贝氏体双相细晶粒钢的组织与性能研究[J]. 材料热处理技术, 2008, 37(18): 34-36.
Wang Zhenyun, Ding Wei. Study on microstructure and properties of martensite/bainite dual phase steel[J]. Material and Heat Treatment, 2008, 37(18): 34-36.
[40]崔桂彬, 鞠新华, 王泽阳, 等. 钢中贝/马双相组织的EBSD表征及其对性能的影响[J]. 金属热处理, 2019, 44(10): 147-151.
Cui Guibin, Ju Xinhua, Wang Zeyang, et al. EBSD characterization of bainite/martensite dual phase microstructure in steel and its effect on properties[J]. Heat Treatment of Metals, 2019, 44(10): 147-151.
[41]乔志霞, 刘永长. 低合金超高强度钢中的相变及组织控制[J]. 金属热处理, 2015, 40(1): 12-22.
Qiao Zhixia, Liu Yongchang. Phase transformation and microstructural control of low alloyed ultra-high strength steels[J]. Heat Treatment of Metals, 2015, 40(1): 12-22.
[42]张翔云. 700 MPa级海工钢组织调控及低温韧性研究[D]. 鞍山: 辽宁科技大学, 2020.
[43]袁胜福. 高性能海洋工程用钢组织调控及力学性能研究[D]. 北京: 北京科技大学, 2020.
[44]王腾飞. E级高强船板钢轧制及热处理工艺研究[D]. 沈阳: 东北大学, 2017.
[45]Ledermueller C, Zhu H T, Li H J, et al. An initial report on the structure-property relationships of a high-strength low-alloy steel subjected to advanced thermomechanical processing in ferrite[J]. Steel Research Internationa, 2020, 91(7): 1900596.
[46]杨德明. 铌微合金化Q345B钢板生产工艺开发与应用[J]. 山东冶金, 2007, 29(1): 16-18.
Yang Deming. Development and application of production process for niobium microalloy Q345B plate[J]. Shandong Metallurgy, 2007, 29(1): 16-18.
[47]陈刚, 罗小兵, 柴锋, 等. 轧制加热温度对高强度低合金钢组织及冲击性能的影响[J]. 金属热处理, 2022, 47(4): 116-121.
Chen Gang, Luo Xiaobing, Chai Feng, et al. Influence of rolling and heating temperature on microstructure and impact property of a high strength low alloy steel[J]. Heat Treatment of Metals, 2022, 47(4): 116-121.
[48]杨春卫, 宋增强. 80 mm调质海工钢EH550的生产开发与应用[J]. 中国金属通报, 2021, 75(5): 151-152.
Yang Chunwei, Song Zengqiang. Production development and application of 80 mm quenched and tempered offshore steel EH550[J]. China Metals Bulletin, 2021, 75(5): 151-152.
[49]邬丽莲. NVF550级海洋工程结构用钢的控轧后冷却及回火工艺研究[D]. 西安: 西安建筑科技大学, 2013.
[50]董春宇, 赵宪明, 周晓光, 等. 冷却工艺参数对海洋工程用H型钢组织性能的影响[J]. 东北大学学报(自然科学版), 2019, 40(4): 478-482.
Dong Chunyu, Zhao Xianming, Zhou Xiaoguo, et al. Effect of cooling process parameters on microstructure and mechanical properties of marine engineering H-beam steel[J]. Journal of Northeastern University (Natural Science), 2019, 40(4): 478-482.
[51]邢军. 低合金高强度H型钢轧后控冷工艺研究[D]. 马鞍山: 安徽工业大学, 2013.
[52]姜中行, 麻庆申, 罗文彬. 355MPa级船用钢板试制[J]. 宽厚板, 2004, 10(5): 22-25.
Jiang Zhongxing, Ma Qingshen, Luo Wenbin. Trial-production of 355 MPa class ship plate[J]. Wide and Heavy Plate, 2004, 10(5): 22-25.
[53]王小勇. 海洋工程用低合金高强度超厚钢板的淬透性与强韧性研究[D]. 北京: 钢铁研究总院, 2013.
[54]江乾坤. 热轧H型钢控制冷却工艺研究[J]. 山西冶金, 2019, 42(2): 56-58.
Jiang Qiankun. Control cooling technology of hot rolled H-steel[J]. Shanxi Metallurgy, 2019, 42(2): 56-58.
[55]王国栋. 以超快速冷却为核心的新一代TMCP技术[J]. 上海金属, 2008, 30(2): 1-5.
Wang Guodong. The new generation TMCP with the key technology of ultra-fast cooling[J]. Shanghai Metals, 2008, 30(2): 1-5.
[56]王昭东, 王国栋. 热轧钢材一体化组织性能控制技术[J]. 河北冶金, 2019, 26(4): 1-6.
Wang Zhaodong, Wang Guodong. Integrated optimization of microstructure and properties of hot rolled steel[J]. Hebei Metallurgy, 2019, 26(4): 1-6.
[57]任蕰佳, 苗庆伟, 刘联胜, 等. 喷雾冷却技术在工业炉领域应用的研究综述[J]. 工业炉, 2020, 42(4): 21-24, 30.
Ren Wenjia, Miao Qingwei, Liu Liansheng, et al. Review on application of spray cooling technology in field of industrial furnace[J]. Industrial Furnace, 2020, 42(4): 21-24, 30.
[58]陈松. 大型H型钢控制冷却研究[D]. 唐山: 华北理工大学, 2017.
[59]谈群峰. 热轧H型钢控制冷却工艺研究[J]. 山西冶金, 2021, 44(1): 38-39, 65.
Tan Qunfeng. Control cooling technology of hot rolled H-steel[J]. Shanxi Metallurgy, 2021, 44(1): 38-39, 65.