| [1] |
Wang Yudai, Liu Yang, Zhu Yanyan, Tian Xiangjun, Cheng Xu, Ran Xianzhe, Qian Tingting.
Effect of heat treatment on microstructure homogeneity and tensile properties of hybrid fabricated AerMet100 ultra-high strength steel
[J]. Heat Treatment of Metals, 2022, 47(4): 1-9.
|
| [2] |
Chen Sijun , Chen Songyi, Chen Geng, Yuan Dingling, Chen Kanghua.
Effect of Mg content on microstructure and mechanical properties of 2A14 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 86-92.
|
| [3] |
Bai Qingqing, Zhang Zhihong, Zheng Huaibei, Wang Yinghu.
Precipitation behavior of σ phase in 2507 super duplex stainless steel
[J]. Heat Treatment of Metals, 2022, 47(4): 108-115.
|
| [4] |
Chen Gang, Luo Xiaobing, Chai Feng, Yang Caifu, Zhang Zhengyan, Yang Li.
Influence of rolling heating temperature on microstructure and impact property of a high strength low alloy steel
[J]. Heat Treatment of Metals, 2022, 47(4): 116-121.
|
| [5] |
Li Li, Zeng Yan, Wu Xiaochun.
Heat treatment process optimization for 4Cr5Mo2VCo steel
[J]. Heat Treatment of Metals, 2022, 47(4): 133-140.
|
| [6] |
Luo Diqiang, Yu Yinhong, Zhang Zhenming, Feng Xiaoming, Liu Min, Lai Chaobin.
Effect of yttrium-based rare earth on inclusions and cryogenic temperature impact property of high strength shipbuilding steel
[J]. Heat Treatment of Metals, 2022, 47(3): 142-146.
|
| [7] |
Wu Yingfei, Sun Zhonghua, Wang Yufei, Wang Chengming, Zhang Yunfei, Peng Huifen.
Effect of homogenizing on microstructure and properties of Invar alloy ingot
[J]. Heat Treatment of Metals, 2022, 47(2): 130-136.
|
| [8] |
Cao Chen, Huang Chunling, Cao Yupeng, Yang Yang, Yang Cong.
Effect of laser shocking on surface integrity of 690 high strength steel
[J]. Heat Treatment of Metals, 2021, 46(9): 247-251.
|
| [9] |
Yu Hongjun, Song Chuansongxin, Cheng Fuchao, Gao Zhizhe, Chen Xiaoyan, Wang Yongjin, Zhang Yingchao.
Microstructure and properties of a hypoeutectic high-Cr cast iron under different heat treatment conditions
[J]. Heat Treatment of Metals, 2021, 46(8): 56-60.
|
| [10] |
Xiong Jinsheng, Ning Jing, Su Jie, Jiang Qingwei.
Effect of solution temperature on microstructure and mechanical properties of ultra-high strength steel G33
[J]. Heat Treatment of Metals, 2021, 46(7): 160-164.
|
| [11] |
Li Canming.
Production process of Q960E high strength and high toughness steel
[J]. Heat Treatment of Metals, 2021, 46(7): 182-186.
|
| [12] |
Jia Dongsheng, Hong Zhenjun, Wang Xiaohai, Wang Maoqiu, Mao Lu, Zhang Ruijun.
Effect of nitrogen-methanol atmosphere on hydrogen-induced fracture of45CrNiMoVA high strength steel
[J]. Heat Treatment of Metals, 2021, 46(7): 233-237.
|
| [13] |
Zhao Peilin, Liu Chao, Wu Huiliang, Zheng Li.
Effect of normalizing temperature on microstructure and low temperature toughness of 355 MPa heavy section steel for marine engineering
[J]. Heat Treatment of Metals, 2021, 46(6): 102-106.
|
| [14] |
Xiao Daheng, Zhang Yajing, He Hang, Tuo Chengde, Yuan Rui, Wu Huibin.
Heat treatment process and weldability of 100 mm thick S420 high strength steel
[J]. Heat Treatment of Metals, 2021, 46(6): 107-110.
|
| [15] |
Wang Yujing, Wu Guangliang.
Prediction of heat treatment parameters and thermophysical properties of Q1100 high strength steel for construction machinery
[J]. Heat Treatment of Metals, 2021, 46(6): 172-176.
|
