High temperature mechanical properties of 12NiCrMo steel for pressure vessel

doi:10.13251/j.issn.0254-6051.2015.08.012

HTM

Previous Articles Next Articles

High temperature mechanical properties of 12NiCrMo steel for pressure vessel

School of Material and Metallurgy, Inner Mongolia University of Science &Technology

Online:2015-08-25 Published:2015-09-07

Abstract

CLC Number:

TG42

Ma Yonglin, Bai Qingwei, Xing Shuqing, Chen Zhongyi, Wang Weidong. High temperature mechanical properties of 12NiCrMo steel for pressure vessel[J]. HTM, doi: 10.13251/j.issn.0254-6051.2015.08.012.

[1]	Zhang Mengliang, Tang Wenbo, Li Baiqi, Wang Xiaosheng, Li Wenqiang, Wang Tengfei. Microstructure and properties of additional and in situ synthesized WC particle reinforced iron-based coatings prepared by plasma cladding [J]. Heat Treatment of Metals, 2022, 47(2): 200-204.
[2]	Chen Jin, Qu Min, Cui Yan. Effect of Ni-CNTs on interface behavior of Sn-3.0Ag-0.5Cu lead-free solder joints [J]. Heat Treatment of Metals, 2021, 46(12): 113-118.
[3]	Yuan Hao1,2, Ma Chengyong2, Li Li1, Qi Yanchang2, Zhan Zhaolin1. Influence of Nb on microstructure and mechanical properties of ENiCrFe-7 weld metal [J]. HTM, 2017, 42(2): 16-21.
[4]	Gong Jianxun, Liu Jiangqing, Li Yi. Effects of molybdenum on microstructure and abrasion resistance of open arc hardfacing alloys with high hardness [J]. HTM, 2016, 41(5): 67-72.
[5]	Xu Jiqing, Gong Jianxun, Tian Bing. Effect of current on microstructure and wear resistance of open arc high-boron hardfacing alloys [J]. HTM, 2015, 40(1): 47-51.
[6]	Xue Weihua, Qi Xiaoxu, Li Zhichao. Microstructure, mechanical properties and performance of BCu48ZnNi brazing alloy [J]. HTM, 2014, 39(11): 34-37.
[7]	Pan Xin, Zhang Yu, Wang Yinbai, Wang Na. Microstructure and mechanical properties of 690 MPa weld joint by tandem submerged arc welding [J]. HTM, 2014, 39(8): 35-40.

High temperature mechanical properties of 12NiCrMo steel for pressure vessel

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 7

Recommended Articles

Metrics

Comments